Document Qualcomm PCIe driver devicetree bindings.
Signed-off-by: Stanimir Varbanov <svarba...@mm-sol.com>
---
.../devicetree/bindings/pci/qcom,pcie.txt | 159 ++++++++++++++++++++
1 files changed, 159 insertions(+), 0 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pci/qcom,pcie.txt
diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie.txt
b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
new file mode 100644
index 0000000..2331144
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/qcom,pcie.txt
@@ -0,0 +1,159 @@
+* Qualcomm PCI express root complex
+
+- compatible:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Value shall include "qcom,pcie"
+
+- reg:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Four register ranges as listed in the reg-names property
+
+- reg-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include the following entries
+ - "parf" Qualcomm specific registers
+ - "dbi" Designware PCIe registers
+ - "elbi" External local bus interface registers
+ - "config" PCIe configuration space
+
+- device_type:
+ Usage: required
+ Value type: <string>
+ Definition: Should be "pci". As specified in designware-pcie.txt
+
+- #address-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be set to 3. As specified in designware-pcie.txt
+
+- #size-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be set 2. As specified in designware-pcie.txt
+
+- ranges:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- interrupts:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: MSI interrupt
+
+- interrupt-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain "msi"
+
+- #interrupt-cells:
+ Usage: required
+ Value type: <u32>
+ Definition: Should be 1. As specified in designware-pcie.txt
+
+- interrupt-map-mask:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- interrupt-map:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: As specified in designware-pcie.txt
+
+- clocks:
+ Usage: required
+ Value type: <prop-encoded-array>
+ Definition: Four clocks as listed in clock-names property
+
+- clock-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Must include the following entries
+ - "aux" auxiliary (AUX) clock
+ - "iface" configuration AHB clock
+ - "bus_master" master AXI clock
+ - "bus_slave" slave AXI clock
+
+- resets:
+ Usage: required
+ Value type: <phandle>
+ Definition: List of phandle and reset specifier pairs as listed
+ in reset-names property
+
+- reset-names:
+ Usage: required
+ Value type: <stringlist>
+ Definition: Should contain the following entries
+ - "core" core reset
+
+- <name>-supply:
+ Usage: required
+ Value type: <phandle>
+ Definition: List of phandles to the supply regulators
+ - "vdd_pc" collapsing and restoring power to peripheral
+- gpios:
+ Usage: optional
+ Value type: <phandle>
+ Definition: List of phandle and gpio specifier. Should include
+ - "perst" PCIe endpoint reset signal line
+ - "pewake" PCIe endpoint wake signal line
+
+- pinctrl-0:
+ Usage: required
+ Value type: <phandle>
+ Definition: List of phandles pointing at a pin(s) configuration
+
+- pinctrl-names
+ Usage: required
+ Value type: <stringlist>
+ Definition: List of names of pinctrl-0 state
+
+* Example
+
+ pcie0@fc520000 {
+ compatible = "qcom,pcie";
+ reg = <0xfc520000 0x2000>,
+ <0xff000000 0x1000>,
+ <0xff001000 0x1000>,
+ <0xff002000 0x2000>;
+ reg-names = "parf", "dbi", "elbi", "config";
+ device_type = "pci";
+ linux,pci-domain = <0>;
+ bus-range = <0x00 0xff>;
+ num-lanes = <1>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ ranges = <0x81000000 0 0 0xff200000 0 0x00100000 /*
I/O */
+ 0x82000000 0 0x00300000 0xff300000 0 0x00d00000>; /*
Memory */
+ interrupts = <0 243 0>;
+ interrupt-names = "msi";
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0 0 0 0x7>;
+ interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /*
int_a */
+ <0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /*
int_b */
+ <0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /*
int_c */
+ <0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /*
int_d */
+
+ clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+ <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+ <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+ <&gcc GCC_PCIE_0_SLV_AXI_CLK>;
+ clock-names = "aux", "iface", "master_bus", "slave_bus";
+
+ resets = <&gcc GCC_PCIE_0_BCR>;
+ reset-names = "core";
+
+ vdd_pc-supply = <&gdsc_pcie0>;
+
+ phys = <&pciephy0>;
+ phy-names = "pciephy";
+
+ gpios = <&tlmm 70 0>; /* perst */
+
+ pinctrl-0 = <&pcie0_pins_default>;
+ pinctrl-names = "default";
+ };
--
1.7.0.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
