Re: [PATCH] i8k: Add support for temperature sensor labels

[Greg Kroah-Hartman]

On Sat, Nov 29, 2014 at 06:49:43PM +0100, Pali Rohár wrote:
> On Saturday 29 November 2014 18:43:15 Greg Kroah-Hartman wrote:
> > On Sat, Nov 29, 2014 at 05:04:07PM +0100, Pali Rohár wrote:
> > > This patch adds labels for temperature sensors if SMM
> > > function with EAX register 0x11a3 reports it. These
> > > informations was taken from DOS binary NBSVC.MDM.
> > > 
> > > Signed-off-by: Pali Rohár <pali.ro...@gmail.com>
> > > ---
> > > 
> > >  drivers/char/i8k.c |  110
> > >  +++++++++++++++++++++++++++++++++++++++++----------- 1
> > >  file changed, 88 insertions(+), 22 deletions(-)
> > > 
> > > diff --git a/drivers/char/i8k.c b/drivers/char/i8k.c
> > > index e34a019..77af46b 100644
> > > --- a/drivers/char/i8k.c
> > > +++ b/drivers/char/i8k.c
> > > @@ -42,6 +42,7 @@
> > > 
> > >  #define I8K_SMM_GET_FAN          0x00a3
> > >  #define I8K_SMM_GET_SPEED        0x02a3
> > >  #define I8K_SMM_GET_TEMP 0x10a3
> > > 
> > > +#define I8K_SMM_GET_TEMP_TYPE    0x11a3
> > > 
> > >  #define I8K_SMM_GET_DELL_SIG1    0xfea3
> > >  #define I8K_SMM_GET_DELL_SIG2    0xffa3
> > > 
> > > @@ -288,6 +289,14 @@ static int i8k_set_fan(int fan, int
> > > speed)
> > > 
> > >   return i8k_smm(&regs) ? : i8k_get_fan_status(fan);
> > >  
> > >  }
> > > 
> > > +static int i8k_get_temp_type(int sensor)
> > > +{
> > > + struct smm_regs regs = { .eax = I8K_SMM_GET_TEMP_TYPE, };
> > > +
> > > + regs.ebx = sensor & 0xff;
> > > + return i8k_smm(&regs) ? : regs.eax & 0xff;
> > > +}
> > > +
> > > 
> > >  /*
> > >  
> > >   * Read the cpu temperature.
> > >   */
> > > 
> > > @@ -493,6 +502,29 @@ static int i8k_open_fs(struct inode
> > > *inode, struct file *file)
> > > 
> > >   * Hwmon interface
> > >   */
> > > 
> > > +static ssize_t i8k_hwmon_show_temp_label(struct device
> > > *dev, +                              struct device_attribute *devattr,
> > > +                            char *buf)
> > > +{
> > > + static const char * const labels[] = {
> > > +         "CPU",
> > > +         "GPU",
> > > +         "SODIMM",
> > > +         "Other",
> > > +         "Ambient",
> > > +         "Other",
> > > + };
> > > + int index = to_sensor_dev_attr(devattr)->index;
> > > + int type;
> > > +
> > > + type = i8k_get_temp_type(index);
> > > + if (type < 0)
> > > +         return type;
> > > + if (type >= ARRAY_SIZE(labels))
> > > +         type = ARRAY_SIZE(labels) - 1;
> > > + return sprintf(buf, "%s\n", labels[type]);
> > > +}
> > 
> > No Documentation/ABI/ entry for your new sysfs file?
> 
> It is standard hwmon sysfs entry which is used by other hwmon 
> drivers... It is not i8k.ko driver specific.

Ok, then why is this driver not in a "hwmon-standard" location in the
kernel tree?

greg k-h
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/