Hi,
On Thu, Oct 09, 2014 at 03:50:42PM +0100, Frans Klaver wrote:
> From: René Moll <li...@r-moll.nl>
>
> Signed-off-by: René Moll <li...@r-moll.nl>
> Signed-off-by: Tjerk Hofmeijer <tjerk.hofmei...@xsens.com>
> Signed-off-by: Frans Klaver <frans.kla...@xsens.com>
> ---
> .../bindings/power/reset/ltc2952-poweroff.txt | 31
> ++++++++++++++++++++++
> 1 file changed, 31 insertions(+)
> create mode 100644
> Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
>
> diff --git
> a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
> b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
> new file mode 100644
> index 0000000..c3f3d9e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt
> @@ -0,0 +1,31 @@
> +Binding for the LTC2952 PowerPath controller
> +
> +This chip is used to externally trigger a system shut down. Once the trigger
> +has been sent, the chips watchdog has to be reset to gracefully shut down.
s/chips/chip's/
> If +the Linux systems decides to shut down, it powers off the platform
> via the +poweroff signal.
This sentence can go; the binding should describe the hardware rather
than the Linux behaviour.
Thanks,
Mark.
> +
> +Required properties:
> +
> +- compatible: Must be: "lltc,ltc2952"
> +- watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the
> + chip's watchdog line
> +- poweroff-gpios: phandle + gpio-specifier for the GPIO connected to the
> + chip's kill line
> +
> +Optional properties:
> +
> +- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the
> + chip's trigger line. If this property is not set, the
> + trigger function is ignored and the chip is kept alive
> + until an explicit kill signal is received
> +
> +Example:
> +
> +ltc2952 {
> + compatible = "lltc,ltc2952";
> +
> + trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>;
> + watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
> + poweroff-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
> +};
> --
> 2.1.0
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
