get voltage & duty table from device tree might be better, other platforms can also use this driver without any modify. Tested on a rk3288 sdk board as logic voltage regulator.
Changes in v2: Adviced by Lee Jones - rename the documentation Adviced by Doug Anderson - update the example Adviced by Mark Rutland - remove pwm-reg-period Chris Zhong (2): regulator: st-pwm: get voltage and duty table from dts dt-bindings: add devicetree bindings for st-pwm regulator .../bindings/regulator/pwm-regulator.txt | 29 +++ drivers/regulator/Kconfig | 8 +- drivers/regulator/Makefile | 2 +- drivers/regulator/pwm-regulator.c | 195 ++++++++++++++++++++ drivers/regulator/st-pwm.c | 190 ------------------- 5 files changed, 229 insertions(+), 195 deletions(-) create mode 100644 Documentation/devicetree/bindings/regulator/pwm-regulator.txt create mode 100644 drivers/regulator/pwm-regulator.c delete mode 100644 drivers/regulator/st-pwm.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
