This patch adds driver support for Freescale i.MX23, i.MX28 on-chip regulators.
There are 4 voltage regulators: vddd, vdda, vddio, vddmem and 1 overall
current regulator.
Signed-off-by: Stefan Wahren <stefan.wah...@i2se.com>
---
drivers/regulator/Kconfig | 9 +
drivers/regulator/Makefile | 1 +
drivers/regulator/mxs-regulator.c | 411 ++++++++++++++++++++++++++++++++++++++
3 files changed, 421 insertions(+)
create mode 100644 drivers/regulator/mxs-regulator.c
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 7a3a061..e90e587 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -432,6 +432,15 @@ config REGULATOR_MC13892
Say y here to support the regulators found on the Freescale MC13892
PMIC.
+config REGULATOR_MXS
+ tristate "Freescale MXS on-chip regulators"
+ depends on ARCH_MXS
+ default y if ARCH_MXS
+ help
+ Say y here to support Freescale MXS on-chip regulators.
+ It is recommended that this option be enabled on i.MX23,
+ i.MX28 platform.
+
config REGULATOR_PALMAS
tristate "TI Palmas PMIC Regulators"
depends on MFD_PALMAS
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 25271f8..0f5b66c 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_REGULATOR_MAX77802) += max77802.o
obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o
obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o
obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o
+obj-$(CONFIG_REGULATOR_MXS) += mxs-regulator.o
obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
obj-$(CONFIG_REGULATOR_TPS51632) += tps51632-regulator.o
diff --git a/drivers/regulator/mxs-regulator.c
b/drivers/regulator/mxs-regulator.c
new file mode 100644
index 0000000..7d74518
--- /dev/null
+++ b/drivers/regulator/mxs-regulator.c
@@ -0,0 +1,411 @@
+/*
+ * Freescale STMP378X voltage regulators
+ *
+ * Embedded Alley Solutions, Inc <sou...@embeddedalley.com>
+ *
+ * Copyright (C) 2014 Stefan Wahren
+ * Copyright (C) 2010 Freescale Semiconductor, Inc.
+ * Copyright 2008 Embedded Alley Solutions, Inc All Rights Reserved.
+ */
+
+/*
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/slab.h>
+
+#define HW_POWER_VDDDCTRL (0x00000040)
+#define HW_POWER_VDDACTRL (0x00000050)
+#define HW_POWER_VDDIOCTRL (0x00000060)
+#define HW_POWER_STS (0x000000c0)
+
+#define BM_POWER_STS_DC_OK (1 << 9)
+#define BM_POWER_REG_MODE (1 << 17)
+#define BM_POWER_LEVEL_TRG 0x1f
+
+#define MXS_REG5V_NOT_USB 0
+#define MXS_REG5V_IS_USB 1
+
+
+struct mxs_regulator {
+ struct regulator_desc rdesc;
+ struct regulator_init_data *initdata;
+ struct mxs_regulator *parent;
+
+ spinlock_t lock;
+ wait_queue_head_t wait_q;
+ struct notifier_block nb;
+
+ const char *name;
+ void __iomem *base_addr;
+ void __iomem *power_addr;
+ int mode;
+ int cur_uV;
+ int cur_uA;
+ int max_uA;
+ u32 max_reg_val;
+};
+
+static int mxs_set_voltage(struct regulator_dev *reg, int min_uV, int max_uV,
+ unsigned *selector)
+{
+ struct mxs_regulator *sreg = rdev_get_drvdata(reg);
+ struct regulation_constraints *con = &sreg->initdata->constraints;
+ void __iomem *power_sts = sreg->power_addr + HW_POWER_STS;
+ u32 val, regs, i;
+
+ pr_debug("%s: uv %d, min %d, max %d\n", __func__,
+ max_uV, con->min_uV, con->max_uV);
+
+ if (max_uV < con->min_uV || max_uV > con->max_uV)
+ return -EINVAL;
+
+ val = (max_uV - con->min_uV) * sreg->max_reg_val /
+ (con->max_uV - con->min_uV);
+
+ regs = (__raw_readl(sreg->base_addr) & ~BM_POWER_LEVEL_TRG);
+ pr_debug("%s: calculated val %d\n", __func__, val);
+ __raw_writel(val | regs, sreg->base_addr);
+ for (i = 20; i; i--) {
+ if (__raw_readl(power_sts) & BM_POWER_STS_DC_OK)
+ break;
+ udelay(1);
+ }
+
+ if (i)
+ goto out;
+
+ __raw_writel(val | regs, sreg->base_addr);
+ for (i = 40000; i; i--) {
+ if (__raw_readl(power_sts) & BM_POWER_STS_DC_OK)
+ break;
+ udelay(1);
+ }
+
+ if (i)
+ goto out;
+
+ for (i = 40000; i; i--) {
+ if (__raw_readl(power_sts) & BM_POWER_STS_DC_OK)
+ break;
+ udelay(1);
+ }
+
+out:
+ return !i;
+}
+
+
+static int mxs_get_voltage(struct regulator_dev *reg)
+{
+ struct mxs_regulator *sreg = rdev_get_drvdata(reg);
+ struct regulation_constraints *con = &sreg->initdata->constraints;
+ int uv;
+ u32 val = __raw_readl(sreg->base_addr) & BM_POWER_LEVEL_TRG;
+
+ if (val > sreg->max_reg_val)
+ val = sreg->max_reg_val;
+
+ uv = con->min_uV + val *
+ (con->max_uV - con->min_uV) / sreg->max_reg_val;
+
+ return uv;
+}
+
+static int main_add_current(struct mxs_regulator *sreg,
+ int uA)
+{
+ pr_debug("%s: enter reg %s, uA=%d\n", __func__, sreg->name, uA);
+
+ if (uA > 0 && (sreg->cur_uA + uA > sreg->max_uA))
+ return -EINVAL;
+
+ sreg->cur_uA += uA;
+
+ return 0;
+}
+
+static int mxs_set_current_limit(struct regulator_dev *reg, int min_uA,
+ int max_uA)
+{
+ struct mxs_regulator *sreg = rdev_get_drvdata(reg);
+ struct mxs_regulator *parent = sreg->parent;
+ int ret = 0;
+ unsigned long flags;
+
+ pr_debug("%s: enter reg %s, uA=%d\n",
+ __func__, sreg->name, max_uA);
+
+ if (parent) {
+ spin_lock_irqsave(&parent->lock, flags);
+ ret = main_add_current(parent, max_uA - sreg->cur_uA);
+ spin_unlock_irqrestore(&parent->lock, flags);
+ }
+
+ if ((!ret) || (!parent))
+ goto out;
+
+ if (sreg->mode == REGULATOR_MODE_FAST)
+ return ret;
+
+ while (ret) {
+ wait_event(parent->wait_q ,
+ (max_uA - sreg->cur_uA <
+ parent->max_uA -
+ parent->cur_uA));
+ spin_lock_irqsave(&parent->lock, flags);
+ ret = main_add_current(parent, max_uA - sreg->cur_uA);
+ spin_unlock_irqrestore(&parent->lock, flags);
+ }
+out:
+ if (parent && (max_uA - sreg->cur_uA < 0))
+ wake_up_all(&parent->wait_q);
+ sreg->cur_uA = max_uA;
+ return 0;
+}
+
+static int mxs_get_current_limit(struct regulator_dev *reg)
+{
+ struct mxs_regulator *sreg = rdev_get_drvdata(reg);
+
+ return sreg->cur_uA;
+}
+
+static int mxs_set_mode(struct regulator_dev *reg, unsigned int mode)
+{
+ struct mxs_regulator *sreg = rdev_get_drvdata(reg);
+ int ret = 0;
+ u32 val;
+
+ switch (mode) {
+ case REGULATOR_MODE_FAST:
+ val = __raw_readl(sreg->base_addr);
+ __raw_writel(val | BM_POWER_REG_MODE, sreg->base_addr);
+ break;
+
+ case REGULATOR_MODE_NORMAL:
+ val = __raw_readl(sreg->base_addr);
+ __raw_writel(val & ~BM_POWER_REG_MODE, sreg->base_addr);
+ break;
+
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static unsigned int mxs_get_mode(struct regulator_dev *reg)
+{
+ struct mxs_regulator *sreg = rdev_get_drvdata(reg);
+ u32 val = __raw_readl(sreg->base_addr) & BM_POWER_REG_MODE;
+
+ return val ? REGULATOR_MODE_FAST : REGULATOR_MODE_NORMAL;
+}
+
+static struct regulator_ops mxs_rops = {
+ .set_voltage = mxs_set_voltage,
+ .get_voltage = mxs_get_voltage,
+ .set_current_limit = mxs_set_current_limit,
+ .get_current_limit = mxs_get_current_limit,
+ .set_mode = mxs_set_mode,
+ .get_mode = mxs_get_mode,
+};
+
+static int reg_callback(struct notifier_block *self,
+ unsigned long event, void *data)
+{
+ unsigned long flags;
+ struct mxs_regulator *sreg =
+ container_of(self, struct mxs_regulator , nb);
+
+ switch (event) {
+ case MXS_REG5V_IS_USB:
+ spin_lock_irqsave(&sreg->lock, flags);
+ sreg->max_uA = 500000;
+ spin_unlock_irqrestore(&sreg->lock, flags);
+ break;
+ case MXS_REG5V_NOT_USB:
+ spin_lock_irqsave(&sreg->lock, flags);
+ sreg->max_uA = 0x7fffffff;
+ spin_unlock_irqrestore(&sreg->lock, flags);
+ break;
+ }
+
+ return 0;
+}
+
+static int mxs_regulator_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct device_node *np = dev->of_node;
+ struct device_node *parent;
+ struct regulator_desc *rdesc;
+ struct regulator_dev *rdev;
+ struct mxs_regulator *sreg;
+ struct regulator_init_data *initdata;
+ struct regulation_constraints *con;
+ struct regulator_config config = { };
+ void __iomem *base_addr = NULL;
+ void __iomem *power_addr = NULL;
+ u64 regaddr64 = 0;
+ const u32 *regaddr_p;
+ u32 val = 0;
+ int ret;
+
+ if (!np) {
+ dev_err(dev, "missing device tree\n");
+ return -EINVAL;
+ }
+
+ /* get device base address */
+ base_addr = of_iomap(np, 0);
+ if (!base_addr)
+ return -ENXIO;
+
+ parent = of_get_parent(np);
+ if (!parent)
+ return -ENXIO;
+
+ power_addr = of_iomap(parent, 0);
+ if (!power_addr)
+ return -ENXIO;
+
+ regaddr_p = of_get_address(np, 0, NULL, NULL);
+ if (regaddr_p)
+ regaddr64 = of_translate_address(np, regaddr_p);
+
+ if (!regaddr64) {
+ dev_err(dev, "no or invalid reg property set\n");
+ return -EINVAL;
+ }
+
+ initdata = of_get_regulator_init_data(dev, np);
+ if (!initdata)
+ return -EINVAL;
+
+ ret = of_property_read_u32(np, "mxs-max-reg-val",
+ &val);
+ if (!val) {
+ dev_err(dev, "no or invalid mxs-max-reg-val property set\n");
+ return ret;
+ }
+
+ dev_info(dev, "regulator found\n");
+
+ sreg = devm_kzalloc(dev, sizeof(*sreg), GFP_KERNEL);
+ if (!sreg)
+ return -ENOMEM;
+ sreg->initdata = initdata;
+ sreg->name = of_get_property(np, "regulator-name", NULL);
+ sreg->cur_uA = 0;
+ sreg->cur_uV = 0;
+ sreg->base_addr = base_addr;
+ sreg->power_addr = power_addr;
+ init_waitqueue_head(&sreg->wait_q);
+ spin_lock_init(&sreg->lock);
+ sreg->max_reg_val = val;
+
+ rdesc = &sreg->rdesc;
+ rdesc->name = sreg->name;
+ rdesc->owner = THIS_MODULE;
+ rdesc->ops = &mxs_rops;
+
+ if (strcmp(rdesc->name, "overall_current") == 0)
+ rdesc->type = REGULATOR_CURRENT;
+ else
+ rdesc->type = REGULATOR_VOLTAGE;
+
+ con = &initdata->constraints;
+ rdesc->n_voltages = sreg->max_reg_val;
+ rdesc->min_uV = con->min_uV;
+ rdesc->uV_step = (con->max_uV - con->min_uV) / sreg->max_reg_val;
+ rdesc->linear_min_sel = 0;
+ rdesc->vsel_reg = regaddr64;
+ rdesc->vsel_mask = BM_POWER_LEVEL_TRG;
+
+ config.dev = &pdev->dev;
+ config.init_data = initdata;
+ config.driver_data = sreg;
+ config.of_node = np;
+
+ pr_debug("probing regulator %s %s %d\n",
+ sreg->name,
+ rdesc->name,
+ pdev->id);
+
+ /* register regulator */
+ rdev = devm_regulator_register(dev, rdesc, &config);
+
+ if (IS_ERR(rdev)) {
+ dev_err(&pdev->dev, "failed to register %s\n",
+ rdesc->name);
+ return PTR_ERR(rdev);
+ }
+
+ if (sreg->max_uA) {
+ struct regulator *regu;
+
+ regu = regulator_get(NULL, sreg->name);
+ sreg->nb.notifier_call = reg_callback;
+ regulator_register_notifier(regu, &sreg->nb);
+ }
+
+ platform_set_drvdata(pdev, rdev);
+
+ of_property_read_u32(np, "mxs-default-microvolt",
+ &val);
+
+ if (val)
+ mxs_set_voltage(rdev, val, val, NULL);
+
+ return 0;
+}
+
+static struct of_device_id of_mxs_regulator_match_tbl[] = {
+ { .compatible = "fsl,mxs-regulator", },
+ { /* end */ }
+};
+
+static struct platform_driver mxs_regulator_driver = {
+ .driver = {
+ .name = "mxs-regulator",
+ .owner = THIS_MODULE,
+ .of_match_table = of_mxs_regulator_match_tbl,
+ },
+ .probe = mxs_regulator_probe,
+};
+
+static int __init mxs_regulator_init(void)
+{
+ return platform_driver_register(&mxs_regulator_driver);
+}
+postcore_initcall(mxs_regulator_init);
+
+static void __exit mxs_regulator_exit(void)
+{
+ platform_driver_unregister(&mxs_regulator_driver);
+}
+module_exit(mxs_regulator_exit);
+
+MODULE_AUTHOR("Embedded Alley Solutions <sou...@embeddedalley.com>");
+MODULE_AUTHOR("Stefan Wahren <stefan.wah...@i2se.com>");
+MODULE_DESCRIPTION("Freescale STMP378X voltage regulators");
+MODULE_LICENSE("GPL v2");
--
1.8.1.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
