On Thu, Sep 04, 2014 at 03:39:51PM +0100, Lee Jones wrote:
> Signed-off-by: David Paris <david.pa...@st.com>
> Signed-off-by: Lee Jones <lee.jo...@linaro.org>
You might want to copy the devicetree mailing list for bindings approval.
> ---
> .../devicetree/bindings/watchdog/st-lpc-wdt.txt | 27
> ++++++++++++++++++++++
> 1 file changed, 27 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/watchdog/st-lpc-wdt.txt
>
> diff --git a/Documentation/devicetree/bindings/watchdog/st-lpc-wdt.txt
> b/Documentation/devicetree/bindings/watchdog/st-lpc-wdt.txt
> new file mode 100644
> index 0000000..f0e57ba
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/watchdog/st-lpc-wdt.txt
> @@ -0,0 +1,27 @@
> +STMicroelectronics LPC Watchdog
> +===============================
> +
> +Required properties
> +
> +- compatible : "st,<soc>-watchdog"
Is this acceptable ? I thought the supported bindings have to be listed
explicitly.
> +- reg : LPC registers base address + range
> +- reg-names : Register map "base" and "syscfg-en" are compulsory "type" is
'.' after compulsory ?
> + platform dependent and not required for the STiH407.
> +- clock-names : Should be "lpc_wdt"
> +- clocks : Clock used by LPC device
> +- timeout-sec : Qatchdog timeout in seconds
Watchdog
> +- st,syscfg : Syscfg node used to configure cpu reset type and mask
> +- st,warm_reset : If present, reset type will be 'warm'. If not, it
> will be cold
s/cold/cold./ ?
> +
> +Example:
> + watchdog@fde05000 {
> + compatible = "st,stih416-lpc-watchdog";
> + reg = <0xfde05000 0x1000> <0x204 0x4>;
> + reg-names = "base", "syscfg-en"
> + clock-names = "lpc_wdt";
> + clocks = <&clk_s_d3_flexgen CLK_LPC_0>;
> + timeout-sec = <600>;
> + st,syscfg = <&syscfg_core>;
> + st,warm_reset;
> + };
> +
Empty line at the end results in a whitespace error when applying.
Guenter
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
