Add more description for the "polling-delay" property. Set "trips" and "cooling maps" as optional property, because if missing these two sub-nodes, the thermal zone device still work properly.
Signed-off-by: Wei Ni <w...@nvidia.com> --- Documentation/devicetree/bindings/thermal/thermal.txt | 10 ++++++---- 1 file changed, 6 insertions(+), 4 deletions(-) diff --git a/Documentation/devicetree/bindings/thermal/thermal.txt b/Documentation/devicetree/bindings/thermal/thermal.txt index f5db6b7..e3d3ed9 100644 --- a/Documentation/devicetree/bindings/thermal/thermal.txt +++ b/Documentation/devicetree/bindings/thermal/thermal.txt @@ -136,8 +136,8 @@ containing trip nodes and one sub-node containing all the zone cooling maps. Required properties: - polling-delay: The maximum number of milliseconds to wait between polls - Type: unsigned when checking this thermal zone. - Size: one cell + Type: unsigned when checking this thermal zone. If this value is 0, the + Size: one cell driver will not run polling queue, but just cancel it. - polling-delay-passive: The maximum number of milliseconds to wait Type: unsigned between polls when performing passive cooling. @@ -148,14 +148,16 @@ Required properties: phandles + sensor specifier +Optional property: - trips: A sub-node which is a container of only trip point nodes Type: sub-node required to describe the thermal zone. - cooling-maps: A sub-node which is a container of only cooling device Type: sub-node map nodes, used to describe the relation between trips - and cooling devices. + and cooling devices. If missing the "trips" property, + This sub-node will not be parsed, because no trips can + be bound to cooling devices. -Optional property: - coefficients: An array of integers (one signed cell) containing Type: array coefficients to compose a linear relation between Elem size: one cell the sensors listed in the thermal-sensors property. -- 1.8.1.5 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
