> Minimal implementation. This driver provides raw illuminance readings.
>
> This is based on drivers/hwmon/al3320.c (*) driver from msm tree written
> by Tsechih Lin <tsechih_...@asus.com>
>
> * https://android.googlesource.com/kernel/msm.git
some more comments on minor things below...
> Signed-off-by: Daniel Baluta <daniel.bal...@intel.com>
> ---
> Changes since v1: (reported by Peter Meerwald)
> * used u8 instead of int for passing gain and mean_time
> * used i2c_smbus_read_word_swapped instead of 2 x
> i2c_smbus_read_byte_data
> * used devm_iio_device_register instead of iio_device_register
> * small style fixes
>
> drivers/iio/light/Kconfig | 10 ++
> drivers/iio/light/Makefile | 1 +
> drivers/iio/light/al3320a.c | 247
> ++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 258 insertions(+)
> create mode 100644 drivers/iio/light/al3320a.c
>
> diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig
> index bf05ca5..5bea821 100644
> --- a/drivers/iio/light/Kconfig
> +++ b/drivers/iio/light/Kconfig
> @@ -17,6 +17,16 @@ config ADJD_S311
> This driver can also be built as a module. If so, the module
> will be called adjd_s311.
>
> +config AL3320A
> + tristate "AL3320A ambient light sensor"
> + depends on I2C
> + help
> + Say Y here if you want to build a driver for the Dyna Image AL3320A
> + ambient light sensor.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called al3320a.
> +
> config APDS9300
> tristate "APDS9300 ambient light sensor"
> depends on I2C
> diff --git a/drivers/iio/light/Makefile b/drivers/iio/light/Makefile
> index 8b8c09f..47877a3 100644
> --- a/drivers/iio/light/Makefile
> +++ b/drivers/iio/light/Makefile
> @@ -4,6 +4,7 @@
>
> # When adding new entries keep the list in alphabetical order
> obj-$(CONFIG_ADJD_S311) += adjd_s311.o
> +obj-$(CONFIG_AL3320A) += al3320a.o
> obj-$(CONFIG_APDS9300) += apds9300.o
> obj-$(CONFIG_CM32181) += cm32181.o
> obj-$(CONFIG_CM36651) += cm36651.o
> diff --git a/drivers/iio/light/al3320a.c b/drivers/iio/light/al3320a.c
> new file mode 100644
> index 0000000..787ce2e
> --- /dev/null
> +++ b/drivers/iio/light/al3320a.c
> @@ -0,0 +1,247 @@
> +/*
> + * AL3320A - Dyna Image Ambient Light Sensor
> + *
> + * Copyright (c) 2014, Intel Corporation.
> + *
> + * This file is subject to the terms and conditions of version 2 of
> + * the GNU General Public License. See the file COPYING in the main
> + * directory of this archive for more details.
> + *
> + * IIO driver for AL3320A (7-bit I2C slave address 0x1C).
> + *
> + * TODO: interrupt support
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/init.h>
> +#include <linux/i2c.h>
> +#include <linux/mutex.h>
mutex is not needed
> +
> +#include <linux/iio/iio.h>
> +#include <linux/iio/sysfs.h>
> +
> +#define AL3320A_DRV_NAME "al3320a"
> +
> +#define AL3320A_REG_CONFIG 0x00
> +#define AL3320A_REG_STATUS 0x01
> +#define AL3320A_REG_INT 0x02
> +#define AL3320A_REG_WAIT 0x06
> +#define AL3320A_REG_CONFIG_RANGE 0x07
> +#define AL3320A_REG_PERSIST 0x08
PERSIST is not used, maybe add to TODO
> +#define AL3320A_REG_MEAN_TIME 0x09
> +#define AL3320A_REG_ADUMMY 0x0A
> +#define AL3320A_REG_DATA_LOW 0x22
> +#define AL3320A_REG_DATA_HIGH 0x23
DATA_HIGH became unused by read_word_swapped()
> +
> +#define AL3320A_REG_LOW_THRESH_LOW 0x30
> +#define AL3320A_REG_LOW_THRESH_HIGH 0x31
> +#define AL3320A_REG_HIGH_THRESH_LOW 0x32
> +#define AL3320A_REG_HIGH_THRESH_HIGH 0x33
threshold are TODO
> +
> +#define AL3320A_CONFIG_DISABLE 0x00
> +#define AL3320A_CONFIG_ENABLE BIT(0)
> +#define AL3320A_CONFIG_SW_RESET BIT(2)
SW_RESET is unused
> +
> +#define AL3320A_GAIN_SHIFT 1
> +
> +/* chip params default values */
> +#define AL3320A_DEFAULT_MEAN_TIME 4
> +#define AL3320A_DEFAULT_WAIT_TIME 0 /* no waiting */
> +
> +enum al3320a_range {
> + AL3320A_RANGE_1, /* 33.28K lux */
> + AL3320A_RANGE_2, /* 8.32K lux */
> + AL3320A_RANGE_3, /* 2.08K lux */
> + AL3320A_RANGE_4 /* 0.65K lux */
> +};
> +
> +static const int al3320a_scales[][2] = {
> + {0, 512000}, {0, 128000}, {0, 32000}, {0, 10000}
> +};
> +
> +struct al3320a_data {
> + struct i2c_client *client;
> + u8 range;
> +};
> +
> +static const struct iio_chan_spec al3320a_channels[] = {
> + {
> + .type = IIO_LIGHT,
> + .info_mask_separate =
> + BIT(IIO_CHAN_INFO_RAW) |
> + BIT(IIO_CHAN_INFO_SCALE),
> + }
> +};
> +
> +static int al3320a_enable(struct al3320a_data *data)
> +{
> + return i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG,
> + AL3320A_CONFIG_ENABLE);
> +}
> +
> +static int al3320a_disable(struct al3320a_data *data)
> +{
> + return i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG,
> + AL3320A_CONFIG_DISABLE);
> +}
> +
> +static int al3320a_set_config_range(struct al3320a_data *data, u8 gain)
> +{
> + int ret;
> +
> + ret = i2c_smbus_write_byte_data(data->client, AL3320A_REG_CONFIG_RANGE,
> + gain << AL3320A_GAIN_SHIFT);
> + if (ret >= 0)
> + data->range = gain;
> + return ret;
> +}
> +
> +static int al3320a_set_mean_time(struct al3320a_data *data, u8 mean_time)
> +{
> + return i2c_smbus_write_byte_data(data->client, AL3320A_REG_MEAN_TIME,
> + mean_time);
> +}
> +
> +static int al3320a_set_wait_time(struct al3320a_data *data, u8 wait_time)
> +{
> + return i2c_smbus_write_byte_data(data->client, AL3320A_REG_WAIT,
> + wait_time);
> +}
> +
> +static int al3320a_get_adc_value(struct al3320a_data *data)
> +{
> + return i2c_smbus_read_word_swapped(data->client, AL3320A_REG_DATA_LOW);
> +}
> +
> +static int al3320a_init(struct al3320a_data *data)
> +{
> + int ret;
> +
> + /* power on */
> + ret = al3320a_enable(data);
> + if (ret)
> + return ret;
> +
> + ret = al3320a_set_config_range(data, AL3320A_RANGE_3);
> + if (ret)
> + return ret;
> +
> + ret = al3320a_set_mean_time(data, AL3320A_DEFAULT_MEAN_TIME);
> + if (ret)
> + return ret;
> +
> + ret = al3320a_set_wait_time(data, AL3320A_DEFAULT_WAIT_TIME);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> +static int al3320a_read_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int *val,
> + int *val2,
> + long mask)
> +{
> + struct al3320a_data *data = iio_priv(indio_dev);
> + int ret;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_RAW:
> + ret = al3320a_get_adc_value(data);
> + if (ret < 0)
> + return ret;
> + *val = ret;
> + return IIO_VAL_INT;
> + case IIO_CHAN_INFO_SCALE:
> + *val = al3320a_scales[data->range][0];
> + *val2 = al3320a_scales[data->range][1];
> + return IIO_VAL_INT_PLUS_MICRO;
> + }
> + return -EINVAL;
> +}
> +
> +static int al3320a_write_raw(struct iio_dev *indio_dev,
> + struct iio_chan_spec const *chan,
> + int val, int val2, long mask)
> +{
> + struct al3320a_data *data = iio_priv(indio_dev);
> + int i;
> +
> + switch (mask) {
> + case IIO_CHAN_INFO_SCALE:
> + for (i = 0; i < ARRAY_SIZE(al3320a_scales); i++) {
> + if (val == al3320a_scales[i][0] &&
> + val2 == al3320a_scales[i][1])
> + return al3320a_set_config_range(data, i);
> + }
could add a break; here so it is not missed when handling more masks
> + }
> + return -EINVAL;
> +}
> +
> +static const struct iio_info al3320a_info = {
> + .driver_module = THIS_MODULE,
> + .read_raw = al3320a_read_raw,
> + .write_raw = al3320a_write_raw,
> +};
> +
> +static int al3320a_probe(struct i2c_client *client,
> + const struct i2c_device_id *id)
> +{
> + struct al3320a_data *data;
> + struct iio_dev *indio_dev;
> + int ret;
> +
> + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
> + if (!indio_dev)
> + return -ENOMEM;
> +
> + data = iio_priv(indio_dev);
> + i2c_set_clientdata(client, indio_dev);
> + data->client = client;
> +
> + indio_dev->dev.parent = &client->dev;
> + indio_dev->info = &al3320a_info;
> + indio_dev->name = AL3320A_DRV_NAME;
> + indio_dev->channels = al3320a_channels;
> + indio_dev->num_channels = ARRAY_SIZE(al3320a_channels);
> + indio_dev->modes = INDIO_DIRECT_MODE;
> +
> + ret = al3320a_init(data);
> + if (ret) {
> + dev_err(&client->dev, "al3320a chip init failed\n");
> + return ret;
> + }
> +
> + return devm_iio_device_register(&client->dev, indio_dev);
> +}
> +
> +static int al3320a_remove(struct i2c_client *client)
> +{
> + struct iio_dev *indio_dev = i2c_get_clientdata(client);
> + struct al3320a_data *data = iio_priv(indio_dev);
> +
> + return al3320a_disable(data);
extra space before al3320a_disable()
> +}
> +
> +static const struct i2c_device_id al3320a_id[] = {
> + {"al3320a", 0},
> + {}
> +};
> +MODULE_DEVICE_TABLE(i2c, al3320a_id);
> +
> +static struct i2c_driver al3320a_driver = {
> + .driver = {
> + .name = AL3320A_DRV_NAME,
> + },
> + .probe = al3320a_probe,
> + .remove = al3320a_remove,
> + .id_table = al3320a_id,
> +};
> +
> +module_i2c_driver(al3320a_driver);
> +
> +MODULE_AUTHOR("Daniel Baluta <daniel.bal...@intel.com>");
> +MODULE_DESCRIPTION("AL3320A Ambient Light Sensor driver");
> +MODULE_LICENSE("GPL v2");
>
--
Peter Meerwald
+43-664-2444418 (mobile)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
