On Fri, 2014-07-25 at 01:00AM +0200, Andreas Färber wrote:
> Prepare SPI0 and SPI1 while at it.
> 
> Signed-off-by: Andreas Färber <afaer...@suse.de>
> ---
>  v2: New
>  
>  arch/arm/boot/dts/zynq-7000.dtsi      | 37 
> +++++++++++++++++++++++++++++++++++
>  arch/arm/boot/dts/zynq-parallella.dts |  4 ++++
>  2 files changed, 41 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/zynq-7000.dtsi 
> b/arch/arm/boot/dts/zynq-7000.dtsi
> index 8fd826a..eed3df0 100644
> --- a/arch/arm/boot/dts/zynq-7000.dtsi
> +++ b/arch/arm/boot/dts/zynq-7000.dtsi
> @@ -122,6 +122,30 @@
>                       interrupts = <0 50 4>;
>               };
>  
> +             spi0: spi@e0006000 {
> +                     compatible = "xlnx,zynq-spi-r1p6";
> +                     reg = <0xe0006000 0x1000>;
> +                     status = "disabled";
> +                     interrupt-parent = <&intc>;
> +                     interrupts = <0 26 4>;
> +                     clocks = <&clkc 25>, <&clkc 34>;
> +                     clock-names = "ref_clk", "pclk";
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +             };
> +
> +             spi1: spi@e0007000 {
> +                     compatible = "xlnx,zynq-spi-r1p6";
> +                     reg = <0xe0007000 0x1000>;
> +                     status = "disabled";
> +                     interrupt-parent = <&intc>;
> +                     interrupts = <0 49 4>;
> +                     clocks = <&clkc 26>, <&clkc 35>;
> +                     clock-names = "ref_clk", "pclk";
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +             };
> +
Until here things look good.

>               gem0: ethernet@e000b000 {
>                       compatible = "cdns,gem";
>                       reg = <0xe000b000 0x4000>;
> @@ -140,6 +164,19 @@
>                       clock-names = "pclk", "hclk", "tx_clk";
>               };
>  
> +             qspi: qspi@e000d000 {
> +                     compatible = "xlnx,zynq-spi-r1p6";
> +                     reg = <0xe000d000 0x1000>;
> +                     status = "disabled";
> +                     interrupt-parent = <&intc>;
> +                     interrupts = <0 19 4>;
> +                     clocks = <&clkc 10>, <&clkc 43>;
> +                     clock-names = "ref_clk", "pclk";
> +                     num-cs = <1>;
> +                     #address-cells = <1>;
> +                     #size-cells = <0>;
> +             };
> +
I'm not sure what the status of this driver is. I think QSPI is still
under review on the mailing lists and I don't think we should add this
yet.

        Sören

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to