Hi everyone, This series cleans up the PIT driver in order for it to not depend on anything in mach-at91 anymore, and in the end move it out of mach-at91.
Along the way, these patches also do a bit of cleanup. This has been tested on a G45-EK without DT and an Xplained with DT. Thanks, Maxime Changes from v1: - Changed Kconfig option to ATMEL_PIT - Used DIV_ROUND_CLOSEST to compute the pit rate Maxime Ripard (14): AT91: PIT: Follow the general coding rules AT91: generic.h: Add include safe guards AT91: PIT: Use DIV_ROUND_CLOSEST to compute the cycles AT91: PIT: Use of_have_populated_dt instead of CONFIG_OF AT91: PIT: Rework probe functions AT91: dt: Remove init_time definitions AT91: PIT: Use consistent exit path in probe AT91: PIT: Use pr_fmt AT91: PIT: use request_irq instead of setup_irq AT91: PIT: (Almost) remove the global variables AT91: soc: Add init_time callback AT91: Convert the boards to the init_time callback AT91: PIT: Convert to an early_platform_device AT91: PIT: Move the driver to drivers/clocksource arch/arm/mach-at91/Kconfig | 5 - arch/arm/mach-at91/Makefile | 1 - arch/arm/mach-at91/at91sam9260.c | 34 +++- arch/arm/mach-at91/at91sam9261.c | 34 +++- arch/arm/mach-at91/at91sam9263.c | 34 +++- arch/arm/mach-at91/at91sam926x_time.c | 294 ------------------------------ arch/arm/mach-at91/at91sam9g45.c | 35 +++- arch/arm/mach-at91/at91sam9rl.c | 34 +++- arch/arm/mach-at91/board-afeb-9260v1.c | 2 +- arch/arm/mach-at91/board-cam60.c | 2 +- arch/arm/mach-at91/board-cpu9krea.c | 2 +- arch/arm/mach-at91/board-dt-sam9.c | 10 -- arch/arm/mach-at91/board-dt-sama5.c | 9 - arch/arm/mach-at91/board-flexibity.c | 2 +- arch/arm/mach-at91/board-foxg20.c | 2 +- arch/arm/mach-at91/board-gsia18s.c | 2 +- arch/arm/mach-at91/board-pcontrol-g20.c | 2 +- arch/arm/mach-at91/board-sam9-l9260.c | 2 +- arch/arm/mach-at91/board-sam9260ek.c | 2 +- arch/arm/mach-at91/board-sam9261ek.c | 4 +- arch/arm/mach-at91/board-sam9263ek.c | 2 +- arch/arm/mach-at91/board-sam9g20ek.c | 4 +- arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +- arch/arm/mach-at91/board-sam9rlek.c | 2 +- arch/arm/mach-at91/board-snapper9260.c | 2 +- arch/arm/mach-at91/board-stamp9g20.c | 4 +- arch/arm/mach-at91/generic.h | 8 +- arch/arm/mach-at91/setup.c | 5 + arch/arm/mach-at91/soc.h | 1 + drivers/clocksource/Kconfig | 4 + drivers/clocksource/Makefile | 1 + drivers/clocksource/timer-atmel-pit.c | 304 ++++++++++++++++++++++++++++++++ 32 files changed, 506 insertions(+), 345 deletions(-) delete mode 100644 arch/arm/mach-at91/at91sam926x_time.c create mode 100644 drivers/clocksource/timer-atmel-pit.c -- 2.0.0 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
