On Tue, 1 Jul 2014 11:33:13 +0200 Maxime Ripard <maxime.rip...@free-electrons.com> wrote:
> Hi everyone, > > This series cleans up the PIT driver in order for it to not depend on > anything in mach-at91 anymore, and in the end move it out of > mach-at91. > > Along the way, these patches also do a bit of cleanup. > > This has been tested on a G45-EK without DT and an Xplained with DT. > On the whole series: Acked-by Boris BREZILLON <boris.brezil...@free-electrons.com> > Thanks, > Maxime > > Changes from v1: > - Changed Kconfig option to ATMEL_PIT > - Used DIV_ROUND_CLOSEST to compute the pit rate > > Maxime Ripard (14): > AT91: PIT: Follow the general coding rules > AT91: generic.h: Add include safe guards > AT91: PIT: Use DIV_ROUND_CLOSEST to compute the cycles > AT91: PIT: Use of_have_populated_dt instead of CONFIG_OF > AT91: PIT: Rework probe functions > AT91: dt: Remove init_time definitions > AT91: PIT: Use consistent exit path in probe > AT91: PIT: Use pr_fmt > AT91: PIT: use request_irq instead of setup_irq > AT91: PIT: (Almost) remove the global variables > AT91: soc: Add init_time callback > AT91: Convert the boards to the init_time callback > AT91: PIT: Convert to an early_platform_device > AT91: PIT: Move the driver to drivers/clocksource > > arch/arm/mach-at91/Kconfig | 5 - > arch/arm/mach-at91/Makefile | 1 - > arch/arm/mach-at91/at91sam9260.c | 34 +++- > arch/arm/mach-at91/at91sam9261.c | 34 +++- > arch/arm/mach-at91/at91sam9263.c | 34 +++- > arch/arm/mach-at91/at91sam926x_time.c | 294 > ------------------------------ > arch/arm/mach-at91/at91sam9g45.c | 35 +++- > arch/arm/mach-at91/at91sam9rl.c | 34 +++- > arch/arm/mach-at91/board-afeb-9260v1.c | 2 +- > arch/arm/mach-at91/board-cam60.c | 2 +- > arch/arm/mach-at91/board-cpu9krea.c | 2 +- > arch/arm/mach-at91/board-dt-sam9.c | 10 -- > arch/arm/mach-at91/board-dt-sama5.c | 9 - > arch/arm/mach-at91/board-flexibity.c | 2 +- > arch/arm/mach-at91/board-foxg20.c | 2 +- > arch/arm/mach-at91/board-gsia18s.c | 2 +- > arch/arm/mach-at91/board-pcontrol-g20.c | 2 +- > arch/arm/mach-at91/board-sam9-l9260.c | 2 +- > arch/arm/mach-at91/board-sam9260ek.c | 2 +- > arch/arm/mach-at91/board-sam9261ek.c | 4 +- > arch/arm/mach-at91/board-sam9263ek.c | 2 +- > arch/arm/mach-at91/board-sam9g20ek.c | 4 +- > arch/arm/mach-at91/board-sam9m10g45ek.c | 2 +- > arch/arm/mach-at91/board-sam9rlek.c | 2 +- > arch/arm/mach-at91/board-snapper9260.c | 2 +- > arch/arm/mach-at91/board-stamp9g20.c | 4 +- > arch/arm/mach-at91/generic.h | 8 +- > arch/arm/mach-at91/setup.c | 5 + > arch/arm/mach-at91/soc.h | 1 + > drivers/clocksource/Kconfig | 4 + > drivers/clocksource/Makefile | 1 + > drivers/clocksource/timer-atmel-pit.c | 304 > ++++++++++++++++++++++++++++++++ 32 files changed, 506 insertions(+), > 345 deletions(-) delete mode 100644 > arch/arm/mach-at91/at91sam926x_time.c create mode 100644 > drivers/clocksource/timer-atmel-pit.c > -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
