Adding more people to the list for review.
>-----Original Message-----
>From: Karicheri, Muralidharan
>Sent: Thursday, May 15, 2014 12:02 PM
>To: linux-kernel@vger.kernel.org; linux-...@vger.kernel.org; linux-arm-
>ker...@lists.infradead.org
>Cc: Karicheri, Muralidharan; Shilimkar, Santosh; Mohit Kumar; Jingoo Han; 
>Bjorn Helgaas
>Subject: [PATCH v1 4/5] pci: dw: add common functions to support old hw based 
>pci driver
>
>The older version of DW hw has application space registers for MSI controller 
>and
>inbound/outbound access configuration. Also the legacy interrupt has registers 
>in the
>application space. Drivers such as keystone pci uses these common functions to 
>implement
>the driver.
>These are re-factored from the original driver to separate files to allow 
>re-use for the next
>driver that is based on old dw pci hw such as that found on keystone.
>
>CC: Santosh Shilimkar <santosh.shilim...@ti.com>
>CC: Mohit Kumar <mohit.ku...@st.com>
>CC: Jingoo Han <jg1....@samsung.com>
>CC: Bjorn Helgaas <bhelg...@google.com>
>
>Signed-off-by: Murali Karicheri <m-kariche...@ti.com>
>---
> drivers/pci/host/Kconfig          |    6 +-
> drivers/pci/host/Makefile         |    1 +
> drivers/pci/host/pci-dw-old-msi.c |  150 +++++++++++++++
> drivers/pci/host/pci-dw-old.c     |  371
>+++++++++++++++++++++++++++++++++++++
> drivers/pci/host/pci-dw-old.h     |   30 +++
> 5 files changed, 557 insertions(+), 1 deletion(-)  create mode 100644 
> drivers/pci/host/pci-
>dw-old-msi.c  create mode 100644 drivers/pci/host/pci-dw-old.c  create mode 
>100644
>drivers/pci/host/pci-dw-old.h
>
>diff --git a/drivers/pci/host/Kconfig b/drivers/pci/host/Kconfig index 
>a6f67ec..c4f4732
>100644
>--- a/drivers/pci/host/Kconfig
>+++ b/drivers/pci/host/Kconfig
>@@ -9,6 +9,11 @@ config PCI_MVEBU
> config PCIE_DW
>       bool
>
>+config PCI_DW_OLD
>+      bool "Designware Old PCIe h/w"
>+      help
>+         Say Y here if the DW h/w is old version (3.65)
>+
> config PCI_EXYNOS
>       bool "Samsung Exynos PCIe controller"
>       depends on SOC_EXYNOS5440
>@@ -32,5 +37,4 @@ config PCI_RCAR_GEN2
>         Say Y here if you want internal PCI support on R-Car Gen2 SoC.
>         There are 3 internal PCI controllers available with a single
>         built-in EHCI/OHCI host controller present on each one.
>-
> endmenu
>diff --git a/drivers/pci/host/Makefile b/drivers/pci/host/Makefile index 
>13fb333..be5d939
>100644
>--- a/drivers/pci/host/Makefile
>+++ b/drivers/pci/host/Makefile
>@@ -4,3 +4,4 @@ obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
> obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
> obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
> obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
>+obj-$(CONFIG_PCI_DW_OLD) += pci-dw-old-msi.o pci-dw-old.o
>diff --git a/drivers/pci/host/pci-dw-old-msi.c 
>b/drivers/pci/host/pci-dw-old-msi.c
>new file mode 100644
>index 0000000..450bb2f
>--- /dev/null
>+++ b/drivers/pci/host/pci-dw-old-msi.c
>@@ -0,0 +1,150 @@
>+/*
>+ * Designware(dw) old MSI controller (v3.65 or similar)
>+ *
>+ * Copyright (C) 2013-2014 Texas Instruments., Ltd.
>+ *            http://www.ti.com
>+ *
>+ * Author: Murali Karicheri <m-kariche...@ti.com>
>+ *
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 as
>+ * published by the Free Software Foundation.
>+ */
>+
>+#include <linux/of_irq.h>
>+#include <linux/kernel.h>
>+#include <linux/msi.h>
>+#include <linux/pci.h>
>+
>+#include "pcie-designware.h"
>+#include "pci-dw-old.h"
>+
>+#define MSI_IRQ                               0x054
>+#define MSI0_IRQ_STATUS                       0x104
>+#define MSI0_IRQ_ENABLE_SET           0x108
>+#define MSI0_IRQ_ENABLE_CLR           0x10c
>+#define IRQ_STATUS                    0x184
>+#define IRQ_EOI                         0x050
>+#define MSI_IRQ_OFFSET                        4
>+
>+static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys) {
>+      return sys->private_data;
>+}
>+
>+static inline void update_reg_offset_bit_pos(u32 offset, u32 *reg_offset,
>+                                      u32 *bit_pos)
>+{
>+      *reg_offset = offset % 8;
>+      *bit_pos = offset >> 3;
>+}
>+
>+inline u32 dw_old_get_msi_data(struct pcie_port *pp) {
>+      return pp->app_base + MSI_IRQ;
>+}
>+
>+void dw_old_handle_msi_irq(struct pcie_port *pp, int offset) {
>+      u32 pending, vector;
>+      int src, virq;
>+
>+      pending = readl(pp->va_app_base + MSI0_IRQ_STATUS + (offset << 4));
>+      /*
>+       * MSI0, Status bit 0-3 shows vectors 0, 8, 16, 24, MSI1 status bit
>+       * shows 1, 9, 17, 25 and so forth
>+       */
>+      for (src = 0; src < 4; src++) {
>+              if (BIT(src) & pending) {
>+                      vector = offset + (src << 3);
>+                      virq = irq_linear_revmap(pp->irq_domain, vector);
>+                      dev_dbg(pp->dev,
>+                              "irq: bit %d, vector %d, virq %d\n",
>+                               src, vector, virq);
>+                      generic_handle_irq(virq);
>+              }
>+      }
>+}
>+
>+static void dw_old_msi_irq_ack(struct irq_data *d) {
>+      u32 offset, reg_offset, bit_pos;
>+      unsigned int irq = d->irq;
>+      struct msi_desc *msi;
>+      struct pcie_port *pp;
>+
>+      msi = irq_get_msi_desc(irq);
>+      pp = sys_to_pcie(msi->dev->bus->sysdata);
>+      offset = irq - irq_linear_revmap(pp->irq_domain, 0);
>+      update_reg_offset_bit_pos(offset, &reg_offset, &bit_pos);
>+
>+      writel(BIT(bit_pos),
>+              pp->va_app_base + MSI0_IRQ_STATUS + (reg_offset << 4));
>+      writel(reg_offset + MSI_IRQ_OFFSET, pp->va_app_base + IRQ_EOI); }
>+
>+static void dw_old_msi_irq_mask(struct irq_data *d) {
>+      u32 offset, reg_offset, bit_pos;
>+      unsigned int irq = d->irq;
>+      struct msi_desc *msi;
>+      struct pcie_port *pp;
>+
>+      msi = irq_get_msi_desc(irq);
>+      pp = sys_to_pcie(msi->dev->bus->sysdata);
>+      offset = irq - irq_linear_revmap(pp->irq_domain, 0);
>+      update_reg_offset_bit_pos(offset, &reg_offset, &bit_pos);
>+
>+      /* mask the end point if PVM implemented */
>+      if (IS_ENABLED(CONFIG_PCI_MSI)) {
>+              if (msi->msi_attrib.maskbit)
>+                      mask_msi_irq(d);
>+      }
>+
>+      writel(BIT(bit_pos),
>+              pp->va_app_base + MSI0_IRQ_ENABLE_CLR + (reg_offset << 4)); }
>+
>+static void dw_old_msi_irq_unmask(struct irq_data *d) {
>+      u32 offset, reg_offset, bit_pos;
>+      unsigned int irq = d->irq;
>+      struct msi_desc *msi;
>+      struct pcie_port *pp;
>+
>+      msi = irq_get_msi_desc(irq);
>+      pp = sys_to_pcie(msi->dev->bus->sysdata);
>+      offset = irq - irq_linear_revmap(pp->irq_domain, 0);
>+      update_reg_offset_bit_pos(offset, &reg_offset, &bit_pos);
>+
>+      /* mask the end point if PVM implemented */
>+      if (IS_ENABLED(CONFIG_PCI_MSI)) {
>+              if (msi->msi_attrib.maskbit)
>+                      unmask_msi_irq(d);
>+      }
>+
>+      writel(BIT(bit_pos),
>+              pp->va_app_base + MSI0_IRQ_ENABLE_SET + (reg_offset << 4)); }
>+
>+static struct irq_chip dw_old_msi_chip = {
>+      .name = "PCI-DW-MSI-OLD",
>+      .irq_ack = dw_old_msi_irq_ack,
>+      .irq_mask = dw_old_msi_irq_mask,
>+      .irq_unmask = dw_old_msi_irq_unmask,
>+};
>+
>+static int dw_old_msi_map(struct irq_domain *domain, unsigned int irq,
>+                      irq_hw_number_t hwirq)
>+{
>+      irq_set_chip_and_handler(irq, &dw_old_msi_chip, handle_level_irq);
>+      irq_set_chip_data(irq, domain->host_data);
>+      set_irq_flags(irq, IRQF_VALID);
>+
>+      return 0;
>+}
>+
>+const struct irq_domain_ops dw_old_msi_domain_ops = {
>+      .map = dw_old_msi_map,
>+};
>diff --git a/drivers/pci/host/pci-dw-old.c b/drivers/pci/host/pci-dw-old.c new 
>file mode
>100644 index 0000000..b805013
>--- /dev/null
>+++ b/drivers/pci/host/pci-dw-old.c
>@@ -0,0 +1,371 @@
>+/*
>+ * Designware(dw) old common functions (v3.65 or similar)
>+ *
>+ * Copyright (C) 2013-2014 Texas Instruments., Ltd.
>+ *            http://www.ti.com
>+ *
>+ * Author: Murali Karicheri <m-kariche...@ti.com>
>+ *
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 as
>+ * published by the Free Software Foundation.
>+ */
>+
>+#include <linux/irq.h>
>+#include <linux/irqdomain.h>
>+#include <linux/module.h>
>+#include <linux/of_pci.h>
>+#include <linux/pci.h>
>+
>+#include "pcie-designware.h"
>+#include "pci-dw-old.h"
>+
>+/* Application register defines */
>+#define LTSSM_EN_VAL                  BIT(0)
>+#define LTSSM_STATE_MASK              0x1f
>+#define LTSSM_STATE_L0                        0x11
>+#define DIR_SPD                               (1 << 17)
>+#define DBI_CS2_EN_VAL                        BIT(5)
>+#define OB_XLAT_EN_VAL                        BIT(1)
>+
>+/* Application registers */
>+#define CMD_STATUS                    0x004
>+#define CFG_SETUP                     0x008
>+#define OB_SIZE                               0x030
>+#define CFG_PCIM_WIN_SZ_IDX           3
>+#define CFG_PCIM_WIN_CNT              32
>+#define SPACE0_REMOTE_CFG_OFFSET      0x1000
>+#define OB_OFFSET_INDEX(n)            (0x200 + (8 * n))
>+#define OB_OFFSET_HI(n)                       (0x204 + (8 * n))
>+#define IRQ_EOI                         0x050
>+#define IRQ_STATUS                    0x184
>+#define IRQ_ENABLE_SET                        0x188
>+#define IRQ_ENABLE_CLR                        0x18c
>+
>+/* Config space registers */
>+#define DEBUG0                                0x728
>+#define PL_GEN2                               0x80c
>+
>+static inline struct pcie_port *sys_to_pcie(struct pci_sys_data *sys) {
>+      return sys->private_data;
>+}
>+
>+void dw_old_enable_legacy_irqs(struct pcie_port *pp) {
>+      int i;
>+
>+      for (i = 0; i < MAX_LEGACY_IRQS; i++)
>+              writel(0x1, pp->va_app_base + IRQ_ENABLE_SET + (i << 4)); }
>+
>+void dw_old_handle_legacy_irq(struct pcie_port *pp, int offset) {
>+      u32 pending;
>+      int virq;
>+
>+      pending = readl(pp->va_app_base + IRQ_STATUS + (offset << 4));
>+
>+      if (BIT(0) & pending) {
>+              virq = irq_linear_revmap(pp->legacy_irq_domain, offset);
>+              dev_dbg(pp->dev,
>+                      ": irq: irq_offset %d, virq %d\n", offset, virq);
>+              generic_handle_irq(virq);
>+      }
>+
>+      /* EOI the INTx interrupt */
>+      writel(offset, pp->va_app_base + IRQ_EOI); }
>+
>+static void dw_old_ack_irq(struct irq_data *d) { }
>+
>+static void dw_old_mask_irq(struct irq_data *d) { }
>+
>+static void dw_old_unmask_irq(struct irq_data *d) { }
>+
>+struct irq_chip dw_old_legacy_irq_chip = {
>+      .name = "PCI-DW-LEGACY-old-irq",
>+      .irq_ack = dw_old_ack_irq,
>+      .irq_mask = dw_old_mask_irq,
>+      .irq_unmask = dw_old_unmask_irq,
>+};
>+
>+static int dw_old_init_legacy_irq_map(struct irq_domain *d, unsigned int irq,
>+                                    irq_hw_number_t hw)
>+{
>+      irq_set_chip_and_handler(irq, &dw_old_legacy_irq_chip,
>+                              handle_level_irq);
>+      irq_set_chip_data(irq, d->host_data);
>+      set_irq_flags(irq, IRQF_VALID);
>+
>+      return 0;
>+}
>+
>+static const struct irq_domain_ops dw_old_legacy_irq_domian_ops = {
>+      .map = dw_old_init_legacy_irq_map,
>+      .xlate = irq_domain_xlate_onetwocell,
>+};
>+
>+/**
>+ * dw_old_set_outbound_trans() - Set PHYADDR <-> BUSADDR
>+ * mapping for outbound
>+ */
>+void dw_old_setup_ob_regs(struct pcie_port *pp) {
>+      u32 start = pp->mem.start, end = pp->mem.end;
>+      int i, tr_size;
>+
>+      dev_dbg(pp->dev, "Setting outbound translation for %#x-%#x\n",
>+              start, end);
>+
>+      /* Set outbound translation size per window division */
>+      writel(CFG_PCIM_WIN_SZ_IDX & 0x7, pp->va_app_base + OB_SIZE);
>+
>+      tr_size = (1 << (CFG_PCIM_WIN_SZ_IDX & 0x7)) * SZ_1M;
>+
>+      /* Using Direct 1:1 mapping of RC <-> PCI memory space */
>+      for (i = 0; (i < CFG_PCIM_WIN_CNT) && (start < end); i++) {
>+              writel(start | 1, pp->va_app_base + OB_OFFSET_INDEX(i));
>+              writel(0, pp->va_app_base + OB_OFFSET_HI(i));
>+              start += tr_size;
>+      }
>+
>+      /* Enable OB translation */
>+      writel(OB_XLAT_EN_VAL | readl(pp->va_app_base + CMD_STATUS),
>+              pp->va_app_base + CMD_STATUS);
>+}
>+
>+/**
>+ * dw_old_set_dbi_mode() - Set DBI mode to access overlaid BAR mask
>+registers
>+ *
>+ * Since modification of dbi_cs2 involves different clock domain, read
>+the
>+ * status back to ensure the transition is complete.
>+ */
>+static inline void dw_old_set_dbi_mode(void __iomem *reg_virt) {
>+      u32 val;
>+
>+      writel(DBI_CS2_EN_VAL | readl(reg_virt + CMD_STATUS),
>+                   reg_virt + CMD_STATUS);
>+
>+      do {
>+              val = readl(reg_virt + CMD_STATUS);
>+      } while (!(val & DBI_CS2_EN_VAL));
>+}
>+
>+/**
>+ * dw_old_clear_dbi_mode() - Disable DBI mode
>+ *
>+ * Since modification of dbi_cs2 involves different clock domain, read
>+the
>+ * status back to ensure the transition is complete.
>+ */
>+static inline void dw_old_clear_dbi_mode(void __iomem *reg_virt) {
>+      u32 val;
>+
>+      writel(~DBI_CS2_EN_VAL & readl(reg_virt + CMD_STATUS),
>+                   reg_virt + CMD_STATUS);
>+
>+      do {
>+              val = readl(reg_virt + CMD_STATUS);
>+      } while (val & DBI_CS2_EN_VAL);
>+}
>+
>+void dw_old_disable_bars(struct pcie_port *pp) {
>+      dw_old_set_dbi_mode(pp->va_app_base);
>+      writel(0, pp->dbi_base + PCI_BASE_ADDRESS_0);
>+      writel(0, pp->dbi_base + PCI_BASE_ADDRESS_1);
>+      dw_old_clear_dbi_mode(pp->va_app_base);
>+}
>+
>+/**
>+ * dw_old_setup_config_addr() - Set up configuration space address for
>+a
>+ * device
>+ *
>+ * @pp: ptr to pcie_port structure
>+ * @bus: Bus number the device is residing on
>+ * @device: Device number
>+ * @function: Function number in device
>+ *
>+ * Forms and returns the address of configuration space mapped in
>+PCIESS
>+ * address space 0. Also configures CFG_SETUP for remote configuration
>+space
>+ * access.
>+ *
>+ * The address space has two regions to access configuration - local and 
>remote.
>+ * We access local region for bus 0 (as RC is attached on bus 0) and
>+remote
>+ * region for others with TYPE 1 access when bus > 1. As for device on
>+bus = 1,
>+ * we will do TYPE 0 access as it will be on our secondary bus (logical).
>+ * CFG_SETUP is needed only for remote configuration access.
>+ */
>+static inline void __iomem *
>+dw_old_setup_config_addr(struct pcie_port *pp, u8 bus, u8 device, u8
>+function) {
>+      u32 regval;
>+
>+      if (bus == 0)
>+              return pp->dbi_base;
>+
>+      regval = (bus << 16) | (device << 8) | function;
>+      /*
>+       * Since Bus#1 will be a virtual bus, we need to have TYPE0
>+       * access only.
>+       * TYPE 1
>+       */
>+      if (bus != 1)
>+              regval |= BIT(24);
>+
>+      writel(regval, pp->va_app_base + CFG_SETUP);
>+
>+      return pp->dbi_base + SPACE0_REMOTE_CFG_OFFSET; }
>+
>+int dw_old_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
>+              unsigned int devfn, int where, int size, u32 *val) {
>+      u8 bus_num = bus->number;
>+      void __iomem *addr;
>+      int ret;
>+
>+      addr = dw_old_setup_config_addr(pp, bus_num, PCI_SLOT(devfn),
>+                               PCI_FUNC(devfn));
>+
>+      ret = dw_pcie_cfg_read(addr + (where & ~0x3), where, size, val);
>+
>+      return ret;
>+}
>+
>+int dw_old_wr_other_conf(struct pcie_port *pp,
>+              struct pci_bus *bus, unsigned int devfn, int where,
>+              int size, u32 val)
>+{
>+      u8 bus_num = bus->number;
>+      void __iomem *addr;
>+
>+      addr = dw_old_setup_config_addr(pp, bus_num, PCI_SLOT(devfn),
>+                              PCI_FUNC(devfn));
>+      return dw_pcie_cfg_write(addr + (where & ~0x3), where, size, val); }
>+
>+/**
>+ * dw_old_set_ib_access() - Setup inbound access
>+ *
>+ * Configure BAR0 for inbound access. BAR0 is set up in h/w to have
>+ * access to PCIESS application register space and just needs to set up
>+ * inbound address (mainly used for MSI).
>+ */
>+static void dw_old_set_ib_access(struct pcie_port *pp) {
>+      /* Configure and set up BAR0 */
>+      dw_old_set_dbi_mode(pp->va_app_base);
>+
>+      /* Enable BAR0 */
>+      writel(1, pp->dbi_base + PCI_BASE_ADDRESS_0);
>+      writel(SZ_4K - 1, pp->dbi_base + PCI_BASE_ADDRESS_0);
>+
>+      dw_old_clear_dbi_mode(pp->va_app_base);
>+       /*
>+        * For BAR0, just setting bus address for inbound writes (MSI) should
>+        * be sufficient. Use physical address to avoid any conflicts.
>+        */
>+      writel(pp->app_base, pp->dbi_base + PCI_BASE_ADDRESS_0); }
>+
>+/**
>+ * dw_old_pcie_scan_bus() - common function to scan bus
>+ *
>+ * common functin to scan old dw based pci bus. This also sets inbound
>+access
>+ * after scan.
>+ */
>+static struct pci_bus *dw_old_pcie_scan_bus(int nr, struct pci_sys_data
>+*sys) {
>+      struct pcie_port *pp = sys_to_pcie(sys);
>+      struct pci_bus *bus;
>+
>+      bus = dw_pcie_scan_bus(nr, sys);
>+      if (bus)
>+              dw_old_set_ib_access(pp);
>+
>+      return bus;
>+}
>+
>+/**
>+ * dw_old_pcie_link_up() - Check if link up
>+ *
>+ * optionally enable link train using link_train option and check if link is 
>up.
>+ */
>+int dw_old_pcie_link_up(struct pcie_port *pp, int link_train) {
>+      u32 val;
>+
>+      if (link_train) {
>+              /*
>+               * KeyStone devices do not support h/w autonomous
>+               * link up-training to GEN2 from GEN1 in either EP/RC modes.
>+               * The software needs to initiate speed change.
>+               */
>+              val = readl(pp->dbi_base + PL_GEN2);
>+              writel(val | DIR_SPD, pp->dbi_base + PL_GEN2);
>+              /*
>+               * Initiate Link Training. We will delay for L0 as specified by
>+               * standard, but will still proceed and return success
>+               * irrespective of L0 status as this will be handled by explicit
>+               * L0 state checks during enumeration.
>+               */
>+              val = readl(pp->va_app_base + CMD_STATUS);
>+              writel(LTSSM_EN_VAL | val,  pp->va_app_base + CMD_STATUS);
>+
>+      }
>+
>+      val = readl(pp->dbi_base + DEBUG0);
>+
>+      return (val & LTSSM_STATE_MASK) == LTSSM_STATE_L0; }
>+
>+static struct hw_pci dw_old_pcie_hw = {
>+      .nr_controllers = 1,
>+      .setup          = dw_pcie_setup,
>+      .scan           = dw_old_pcie_scan_bus,
>+      .swizzle        = pci_common_swizzle,
>+      .add_bus        = dw_pcie_add_bus,
>+      .map_irq        = of_irq_parse_and_map_pci,
>+};
>+
>+
>+/**
>+ * dw_old_pcie_host_init() - initialize host for old dw hardware
>+ *
>+ * Parse the pcie resources from DT bindings and then call common
>+ * dw function to do host initialization.
>+ */
>+int __init dw_old_pcie_host_init(struct pcie_port *pp, struct
>+device_node *np) {
>+      int ret;
>+
>+      if (!pp->va_app_base)
>+              return -EINVAL;
>+
>+      /* create legacy domain */
>+      pp->legacy_irq_domain = irq_domain_add_linear(np,
>+                              MAX_LEGACY_IRQS,
>+                              &dw_old_legacy_irq_domian_ops, NULL);
>+
>+      if (!pp->legacy_irq_domain) {
>+              dev_err(pp->dev, "Failed to add irq domain for legacy irqs\n");
>+              return -EINVAL;
>+      }
>+
>+      ret = dw_pcie_parse_resource(pp);
>+      if (ret)
>+              return ret;
>+
>+      return dw_pcie_common_host_init(pp, &dw_old_pcie_hw,
>+                                      &dw_old_msi_domain_ops);
>+}
>diff --git a/drivers/pci/host/pci-dw-old.h b/drivers/pci/host/pci-dw-old.h new 
>file mode
>100644 index 0000000..6e1af50
>--- /dev/null
>+++ b/drivers/pci/host/pci-dw-old.h
>@@ -0,0 +1,30 @@
>+/*
>+ * Designware(dw) old MSI controller (v3.65 or similar) common includes
>+ *
>+ * Copyright (C) 2013-2014 Texas Instruments., Ltd.
>+ *            http://www.ti.com
>+ *
>+ * Author: Murali Karicheri <m-kariche...@ti.com>
>+ *
>+ *
>+ * This program is free software; you can redistribute it and/or modify
>+ * it under the terms of the GNU General Public License version 2 as
>+ * published by the Free Software Foundation.
>+ */
>+
>+#define MAX_LEGACY_IRQS               4
>+
>+extern const struct irq_domain_ops dw_old_msi_domain_ops;
>+
>+void dw_old_handle_msi_irq(struct pcie_port *pp, int offset);
>+u32 dw_old_get_msi_data(struct pcie_port *pp); void
>+dw_old_enable_legacy_irqs(struct pcie_port *pp); void
>+dw_old_handle_legacy_irq(struct pcie_port *pp, int offset); int
>+dw_old_pcie_host_init(struct pcie_port *pp, struct device_node *np);
>+int dw_old_wr_other_conf(struct pcie_port *pp, struct pci_bus *bus,
>+              unsigned int devfn, int where, int size, u32 val); int
>+dw_old_rd_other_conf(struct pcie_port *pp, struct pci_bus *bus,
>+              unsigned int devfn, int where, int size, u32 *val); void
>+dw_old_disable_bars(struct pcie_port *pp); void
>+dw_old_setup_ob_regs(struct pcie_port *pp); int
>+dw_old_pcie_link_up(struct pcie_port *pp, int link_train);
>--
>1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to