Hi Tomas,
Then I will have a patch 18/16 to replace flush_scheduled_work with flush_work.
Thanks for your advice.
On Wed, 2014-05-14 at 14:53 +0200, Tomas Henzl wrote:
> On 05/14/2014 01:55 PM, ching wrote:
> > From: Ching<ching2...@areca.com.tw>
> >
> > This is a new patch after patch v1.1 series.
> >
> > Fixed calling scsi_scan_host until all initialization are done.
> > And fixed error path free allocated resource.
> >
> > Signed-off-by: Ching<ching2...@areca.com.tw>
> > ---
> >
> > diff -uprN a/drivers/scsi/arcmsr/arcmsr_hba.c
> > b/drivers/scsi/arcmsr/arcmsr_hba.c
> > --- a/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-08 17:45:34.000000000
> > +0800
> > +++ b/drivers/scsi/arcmsr/arcmsr_hba.c 2014-05-14 18:29:30.000000000
> > +0800
> > @@ -112,6 +112,7 @@ static void arcmsr_hbaD_message_isr(stru
> > static void arcmsr_hardware_reset(struct AdapterControlBlock *acb);
> > static const char *arcmsr_info(struct Scsi_Host *);
> > static irqreturn_t arcmsr_interrupt(struct AdapterControlBlock *acb);
> > +static void arcmsr_free_irq(struct pci_dev *, struct AdapterControlBlock
> > *);
> > static int arcmsr_adjust_disk_queue_depth(struct scsi_device *sdev,
> > int queue_depth, int reason)
> > {
> > @@ -778,12 +779,11 @@ static int arcmsr_probe(struct pci_dev *
> > }
> > error = scsi_add_host(host, &pdev->dev);
> > if(error){
> > - goto RAID_controller_stop;
> > + goto free_ccb_pool;
> > }
> > if (arcmsr_request_irq(pdev, acb) == ARC_FAILURE)
> > goto scsi_host_remove;
> > arcmsr_iop_init(acb);
> > - scsi_scan_host(host);
> > INIT_WORK(&acb->arcmsr_do_message_isr_bh, arcmsr_message_isr_bh_fn);
> > atomic_set(&acb->rq_map_token, 16);
> > atomic_set(&acb->ante_token_value, 16);
> > @@ -795,13 +795,17 @@ static int arcmsr_probe(struct pci_dev *
> > add_timer(&acb->eternal_timer);
> > if(arcmsr_alloc_sysfs_attr(acb))
> > goto out_free_sysfs;
> > + scsi_scan_host(host);
> > return 0;
> > out_free_sysfs:
> > -scsi_host_remove:
> > - scsi_remove_host(host);
> > -RAID_controller_stop:
> > + del_timer_sync(&acb->eternal_timer);
> > + flush_work(&acb->arcmsr_do_message_isr_bh);
>
> In your driver you use both flush_work(struct work_struct *) and
> flush_scheduled_work(),
> the second form is used used to flush the shared workqueue.
> That said (and I think you use just one queue) you should decide which one is
> correct.
> In my previous mail I have asked about flush_work because i have it seen
> elsewhere in
> your code, now I've noticed the use of schedule_work and that means that you
> are using the global wq.
>
>
> > arcmsr_stop_adapter_bgrb(acb);
> > arcmsr_flush_adapter_cache(acb);
> > + arcmsr_free_irq(pdev, acb);
> > +scsi_host_remove:
> > + scsi_remove_host(host);
> > +free_ccb_pool:
> > arcmsr_free_ccb_pool(acb);
> > free_hbb_mu:
> > arcmsr_free_mu(acb);
> >
> >
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-scsi" in
> > the body of a message to majord...@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
