Currently, the only 6282-based Kirkwood boards that use I2C1 are Openblocks
A6/A7. Both use the same default I2C1 pinctrl setting from kirkwood-6282.dtsi.
Move the pinctrl setting to the I2C1 node directly and put a note in front of
the corresponding pinctrl node to overwrite the setting on board level.

Signed-off-by: Sebastian Hesselbarth <[email protected]>
---
Cc: Rob Herring <[email protected]>
Cc: Pawel Moll <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Ian Campbell <[email protected]>
Cc: Kumar Gala <[email protected]>
Cc: Russell King <[email protected]>
Cc: Jason Cooper <[email protected]>
Cc: Andrew Lunn <[email protected]>
Cc: Gregory Clement <[email protected]>
Cc: Thomas Petazzoni <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
---
 arch/arm/boot/dts/kirkwood-6282.dtsi         | 6 ++++++
 arch/arm/boot/dts/kirkwood-openblocks_a6.dts | 2 --
 arch/arm/boot/dts/kirkwood-openblocks_a7.dts | 2 --
 3 files changed, 6 insertions(+), 4 deletions(-)

diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi 
b/arch/arm/boot/dts/kirkwood-6282.dtsi
index b869f48cac02..4680eec990f0 100644
--- a/arch/arm/boot/dts/kirkwood-6282.dtsi
+++ b/arch/arm/boot/dts/kirkwood-6282.dtsi
@@ -68,6 +68,10 @@
                                marvell,function = "sata1";
                        };
 
+                       /*
+                        * Default I2C1 pinctrl setting on mpp36/mpp37,
+                        * overwrite marvell,pins on board level if required.
+                        */
                        pmx_twsi1: pmx-twsi1 {
                                marvell,pins = "mpp36", "mpp37";
                                marvell,function = "twsi1";
@@ -101,6 +105,8 @@
                        interrupts = <32>;
                        clock-frequency = <100000>;
                        clocks = <&gate_clk 7>;
+                       pinctrl-0 = <&pmx_twsi1>;
+                       pinctrl-names = "default";
                        status = "disabled";
                };
 
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts 
b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
index 00c2e5a9d863..3dcb5c26b78b 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts
@@ -33,8 +33,6 @@
 
                i2c@11100 {
                        status = "okay";
-                       pinctrl-0 = <&pmx_twsi1>;
-                       pinctrl-names = "default";
 
                        s35390a: s35390a@30 {
                                compatible = "s35390a";
diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts 
b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
index bc07aa5e6698..4e10e92b7822 100644
--- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
+++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts
@@ -45,8 +45,6 @@
 
                i2c@11100 {
                        status = "okay";
-                       pinctrl-0 = <&pmx_twsi1>;
-                       pinctrl-names = "default";
 
                        s24c02: s24c02@50 {
                                compatible = "24c02";
-- 
1.9.1

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to