This adds missing node labels to Kirkwood common and SoC specific nodes to allow to reference them more easily.
Signed-off-by: Sebastian Hesselbarth <[email protected]> --- Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Kumar Gala <[email protected]> Cc: Russell King <[email protected]> Cc: Jason Cooper <[email protected]> Cc: Andrew Lunn <[email protected]> Cc: Gregory Clement <[email protected]> Cc: Thomas Petazzoni <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] --- arch/arm/boot/dts/kirkwood-6192.dtsi | 10 +++++----- arch/arm/boot/dts/kirkwood-6281.dtsi | 10 +++++----- arch/arm/boot/dts/kirkwood-6282.dtsi | 16 ++++++++-------- arch/arm/boot/dts/kirkwood.dtsi | 16 ++++++++-------- 4 files changed, 26 insertions(+), 26 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi index 3916937d6818..294a6fa0208c 100644 --- a/arch/arm/boot/dts/kirkwood-6192.dtsi +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -15,7 +15,7 @@ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -76,14 +76,14 @@ }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -92,7 +92,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 416d96e1302f..2560cbbdb0b3 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -15,7 +15,7 @@ 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -76,14 +76,14 @@ }; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -94,7 +94,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 2902e0d7971d..f4b4786b9a01 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -1,6 +1,6 @@ / { mbus { - pcie-controller { + pciec: pcie-controller { compatible = "marvell,kirkwood-pcie"; status = "disabled"; device_type = "pci"; @@ -19,7 +19,7 @@ 0x82000000 0x2 0 MBUS_ID(0x04, 0xd8) 0 1 0 /* Port 1.0 MEM */ 0x81000000 0x2 0 MBUS_ID(0x04, 0xd0) 0 1 0 /* Port 1.0 IO */>; - pcie@1,0 { + pcie0: pcie@1,0 { device_type = "pci"; assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; reg = <0x0800 0 0 0 0>; @@ -36,7 +36,7 @@ status = "disabled"; }; - pcie@2,0 { + pcie1: pcie@2,0 { device_type = "pci"; assigned-addresses = <0x82001000 0 0x00044000 0 0x2000>; reg = <0x1000 0 0 0 0>; @@ -104,20 +104,20 @@ }; }; - thermal@10078 { + thermal: thermal@10078 { compatible = "marvell,kirkwood-thermal"; reg = <0x10078 0x4>; status = "okay"; }; - rtc@10300 { + rtc: rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; interrupts = <53>; clocks = <&gate_clk 7>; }; - i2c@11100 { + i2c1: i2c@11100 { compatible = "marvell,mv64xxx-i2c"; reg = <0x11100 0x20>; #address-cells = <1>; @@ -128,7 +128,7 @@ status = "disabled"; }; - sata@80000 { + sata: sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; @@ -139,7 +139,7 @@ status = "disabled"; }; - mvsdio@90000 { + sdio: mvsdio@90000 { compatible = "marvell,orion-sdio"; reg = <0x90000 0x200>; interrupts = <28>; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 90384587c278..2570e0f1673f 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -40,7 +40,7 @@ pcie-mem-aperture = <0xe0000000 0x10000000>; /* 256 MiB memory space */ pcie-io-aperture = <0xf2000000 0x100000>; /* 1 MiB I/O space */ - crypto@0301 { + cesa: crypto@0301 { compatible = "marvell,orion-crypto"; reg = <MBUS_ID(0xf0, 0x01) 0x30000 0x10000>, <MBUS_ID(0x03, 0x01) 0 0x800>; @@ -77,7 +77,7 @@ #clock-cells = <1>; }; - spi@10600 { + spi0: spi@10600 { compatible = "marvell,orion-spi"; #address-cells = <1>; #size-cells = <0>; @@ -123,7 +123,7 @@ status = "disabled"; }; - serial@12000 { + uart0: serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; reg-shift = <2>; @@ -132,7 +132,7 @@ status = "disabled"; }; - serial@12100 { + uart1: serial@12100 { compatible = "ns16550a"; reg = <0x12100 0x100>; reg-shift = <2>; @@ -146,7 +146,7 @@ reg = <0x20000 0x80>, <0x1500 0x20>; }; - system-controller@20000 { + sysc: system-controller@20000 { compatible = "marvell,orion-system-controller"; reg = <0x20000 0x120>; }; @@ -196,7 +196,7 @@ status = "okay"; }; - ehci@50000 { + usb0: ehci@50000 { compatible = "marvell,orion-ehci"; reg = <0x50000 0x1000>; interrupts = <19>; @@ -204,7 +204,7 @@ status = "okay"; }; - xor@60800 { + dma0: xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 0x60A00 0x100>; @@ -224,7 +224,7 @@ }; }; - xor@60900 { + dma1: xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 0x60B00 0x100>; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
