On Wednesday, April 23, 2014 12:13:54 AM Stratos Karafotis wrote:
> Fix the following checkpatch warnings:
In addition to comments from Viresh, I have a general one.
Some of the checkpatch.pl warnings are not worth fixing at all ->
> - WARNING: Prefer pr_err(... to printk(KERN_ERR ...
> - WARNING: Prefer pr_info(... to printk(KERN_INFO ...
> - WARNING: Prefer pr_warn(... to printk(KERN_WARNING ...
> - WARNING: quoted string split across lines
> - WARNING: line over 80 characters
-> and the "line over 80 characters" ones are outright wrong in many cases,
so please don't "fix" them.
> - WARNING: please, no spaces at the start of a line
>
> Also, define the pr_fmt macro instead of PFX for the module name.
>
> Signed-off-by: Stratos Karafotis <strat...@semaphore.gr>
> ---
> drivers/cpufreq/powernow-k8.c | 180
> ++++++++++++++++++------------------------
> drivers/cpufreq/powernow-k8.h | 11 ++-
> 2 files changed, 84 insertions(+), 107 deletions(-)
>
> diff --git a/drivers/cpufreq/powernow-k8.c b/drivers/cpufreq/powernow-k8.c
> index 1b6ae6b..fa0386e 100644
> --- a/drivers/cpufreq/powernow-k8.c
> +++ b/drivers/cpufreq/powernow-k8.c
> @@ -27,6 +27,8 @@
> * power and thermal data sheets, (e.g. 30417.pdf, 30430.pdf, 43375.pdf)
> */
>
> +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
> +
> #include <linux/kernel.h>
> #include <linux/smp.h>
> #include <linux/module.h>
> @@ -45,7 +47,6 @@
> #include <linux/mutex.h>
> #include <acpi/processor.h>
>
> -#define PFX "powernow-k8: "
> #define VERSION "version 2.20.00"
> #include "powernow-k8.h"
>
> @@ -161,7 +162,7 @@ static int write_new_fid(struct powernow_k8_data *data,
> u32 fid)
> u32 i = 0;
>
> if ((fid & INVALID_FID_MASK) || (data->currvid & INVALID_VID_MASK)) {
> - printk(KERN_ERR PFX "internal error - overflow on fid write\n");
> + pr_err("internal error - overflow on fid write\n");
> return 1;
> }
>
> @@ -175,9 +176,7 @@ static int write_new_fid(struct powernow_k8_data *data,
> u32 fid)
> do {
> wrmsr(MSR_FIDVID_CTL, lo, data->plllock * PLL_LOCK_CONVERSION);
> if (i++ > 100) {
> - printk(KERN_ERR PFX
> - "Hardware error - pending bit very stuck - "
> - "no further pstate changes possible\n");
> + pr_err("Hardware error - pending bit very stuck - no
> further pstate changes possible\n");
> return 1;
> }
> } while (query_current_values_with_pending_wait(data));
> @@ -185,16 +184,14 @@ static int write_new_fid(struct powernow_k8_data *data,
> u32 fid)
> count_off_irt(data);
>
> if (savevid != data->currvid) {
> - printk(KERN_ERR PFX
> - "vid change on fid trans, old 0x%x, new 0x%x\n",
> - savevid, data->currvid);
> + pr_err("vid change on fid trans, old 0x%x, new 0x%x\n",
> + savevid, data->currvid);
> return 1;
> }
>
> if (fid != data->currfid) {
> - printk(KERN_ERR PFX
> - "fid trans failed, fid 0x%x, curr 0x%x\n", fid,
> - data->currfid);
> + pr_err("fid trans failed, fid 0x%x, curr 0x%x\n", fid,
> + data->currfid);
> return 1;
> }
>
> @@ -209,7 +206,7 @@ static int write_new_vid(struct powernow_k8_data *data,
> u32 vid)
> int i = 0;
>
> if ((data->currfid & INVALID_FID_MASK) || (vid & INVALID_VID_MASK)) {
> - printk(KERN_ERR PFX "internal error - overflow on vid write\n");
> + pr_err("internal error - overflow on vid write\n");
> return 1;
> }
>
> @@ -223,23 +220,19 @@ static int write_new_vid(struct powernow_k8_data *data,
> u32 vid)
> do {
> wrmsr(MSR_FIDVID_CTL, lo, STOP_GRANT_5NS);
> if (i++ > 100) {
> - printk(KERN_ERR PFX "internal error - pending bit "
> - "very stuck - no further pstate "
> - "changes possible\n");
> + pr_err("internal error - pending bit very stuck - no
> further pstate changes possible\n");
> return 1;
> }
> } while (query_current_values_with_pending_wait(data));
>
> if (savefid != data->currfid) {
> - printk(KERN_ERR PFX "fid changed on vid trans, old "
> - "0x%x new 0x%x\n",
> - savefid, data->currfid);
> + pr_err("fid changed on vid trans, old 0x%x new 0x%x\n",
> + savefid, data->currfid);
> return 1;
> }
>
> if (vid != data->currvid) {
> - printk(KERN_ERR PFX "vid trans failed, vid 0x%x, "
> - "curr 0x%x\n",
> + pr_err("vid trans failed, vid 0x%x, curr 0x%x\n",
> vid, data->currvid);
> return 1;
> }
> @@ -283,8 +276,7 @@ static int transition_fid_vid(struct powernow_k8_data
> *data,
> return 1;
>
> if ((reqfid != data->currfid) || (reqvid != data->currvid)) {
> - printk(KERN_ERR PFX "failed (cpu%d): req 0x%x 0x%x, "
> - "curr 0x%x 0x%x\n",
> + pr_err("failed (cpu%d): req 0x%x 0x%x, curr 0x%x 0x%x\n",
> smp_processor_id(),
> reqfid, reqvid, data->currfid, data->currvid);
> return 1;
> @@ -304,8 +296,7 @@ static int core_voltage_pre_transition(struct
> powernow_k8_data *data,
> u32 savefid = data->currfid;
> u32 maxvid, lo, rvomult = 1;
>
> - pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, "
> - "reqvid 0x%x, rvo 0x%x\n",
> + pr_debug("ph1 (cpu%d): start, currfid 0x%x, currvid 0x%x, reqvid 0x%x,
> rvo 0x%x\n",
> smp_processor_id(),
> data->currfid, data->currvid, reqvid, data->rvo);
>
> @@ -342,7 +333,7 @@ static int core_voltage_pre_transition(struct
> powernow_k8_data *data,
> return 1;
>
> if (savefid != data->currfid) {
> - printk(KERN_ERR PFX "ph1 err, currfid changed 0x%x\n",
> + pr_err("ph1 err, currfid changed 0x%x\n",
> data->currfid);
> return 1;
> }
> @@ -360,13 +351,11 @@ static int core_frequency_transition(struct
> powernow_k8_data *data, u32 reqfid)
> u32 fid_interval, savevid = data->currvid;
>
> if (data->currfid == reqfid) {
> - printk(KERN_ERR PFX "ph2 null fid transition 0x%x\n",
> - data->currfid);
> + pr_err("ph2 null fid transition 0x%x\n", data->currfid);
> return 0;
> }
>
> - pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, "
> - "reqfid 0x%x\n",
> + pr_debug("ph2 (cpu%d): starting, currfid 0x%x, currvid 0x%x, reqfid
> 0x%x\n",
> smp_processor_id(),
> data->currfid, data->currvid, reqfid);
>
> @@ -409,15 +398,13 @@ static int core_frequency_transition(struct
> powernow_k8_data *data, u32 reqfid)
> return 1;
>
> if (data->currfid != reqfid) {
> - printk(KERN_ERR PFX
> - "ph2: mismatch, failed fid transition, "
> - "curr 0x%x, req 0x%x\n",
> + pr_err("ph2: mismatch, failed fid transition, curr 0x%x, req
> 0x%x\n",
> data->currfid, reqfid);
> return 1;
> }
>
> if (savevid != data->currvid) {
> - printk(KERN_ERR PFX "ph2: vid changed, save 0x%x, curr 0x%x\n",
> + pr_err("ph2: vid changed, save 0x%x, curr 0x%x\n",
> savevid, data->currvid);
> return 1;
> }
> @@ -444,16 +431,13 @@ static int core_voltage_post_transition(struct
> powernow_k8_data *data,
> return 1;
>
> if (savefid != data->currfid) {
> - printk(KERN_ERR PFX
> - "ph3: bad fid change, save 0x%x, curr 0x%x\n",
> + pr_err("ph3: bad fid change, save 0x%x, curr 0x%x\n",
> savefid, data->currfid);
> return 1;
> }
>
> if (data->currvid != reqvid) {
> - printk(KERN_ERR PFX
> - "ph3: failed vid transition\n, "
> - "req 0x%x, curr 0x%x",
> + pr_err("ph3: failed vid transition\n, req 0x%x, curr
> 0x%x",
> reqvid, data->currvid);
> return 1;
> }
> @@ -498,23 +482,20 @@ static void check_supported_cpu(void *_rc)
> if ((eax & CPUID_XFAM) == CPUID_XFAM_K8) {
> if (((eax & CPUID_USE_XFAM_XMOD) != CPUID_USE_XFAM_XMOD) ||
> ((eax & CPUID_XMOD) > CPUID_XMOD_REV_MASK)) {
> - printk(KERN_INFO PFX
> - "Processor cpuid %x not supported\n", eax);
> + pr_info("Processor cpuid %x not supported\n", eax);
> return;
> }
>
> eax = cpuid_eax(CPUID_GET_MAX_CAPABILITIES);
> if (eax < CPUID_FREQ_VOLT_CAPABILITIES) {
> - printk(KERN_INFO PFX
> - "No frequency change capabilities detected\n");
> + pr_info("No frequency change capabilities detected\n");
> return;
> }
>
> cpuid(CPUID_FREQ_VOLT_CAPABILITIES, &eax, &ebx, &ecx, &edx);
> if ((edx & P_STATE_TRANSITION_CAPABLE)
> != P_STATE_TRANSITION_CAPABLE) {
> - printk(KERN_INFO PFX
> - "Power state transitions not supported\n");
> + pr_info("Power state transitions not supported\n");
> return;
> }
> *rc = 0;
> @@ -529,43 +510,39 @@ static int check_pst_table(struct powernow_k8_data
> *data, struct pst_s *pst,
>
> for (j = 0; j < data->numps; j++) {
> if (pst[j].vid > LEAST_VID) {
> - printk(KERN_ERR FW_BUG PFX "vid %d invalid : 0x%x\n",
> - j, pst[j].vid);
> + pr_err(FW_BUG "vid %d invalid : 0x%x\n", j,
> + pst[j].vid);
> return -EINVAL;
> }
> if (pst[j].vid < data->rvo) {
> /* vid + rvo >= 0 */
> - printk(KERN_ERR FW_BUG PFX "0 vid exceeded with pstate"
> - " %d\n", j);
> + pr_err(FW_BUG "0 vid exceeded with pstate %d\n", j);
> return -ENODEV;
> }
> if (pst[j].vid < maxvid + data->rvo) {
> /* vid + rvo >= maxvid */
> - printk(KERN_ERR FW_BUG PFX "maxvid exceeded with pstate"
> - " %d\n", j);
> + pr_err(FW_BUG "maxvid exceeded with pstate %d\n", j);
> return -ENODEV;
> }
> if (pst[j].fid > MAX_FID) {
> - printk(KERN_ERR FW_BUG PFX "maxfid exceeded with pstate"
> - " %d\n", j);
> + pr_err(FW_BUG "maxfid exceeded with pstate %d\n", j);
> return -ENODEV;
> }
> if (j && (pst[j].fid < HI_FID_TABLE_BOTTOM)) {
> /* Only first fid is allowed to be in "low" range */
> - printk(KERN_ERR FW_BUG PFX "two low fids - %d : "
> - "0x%x\n", j, pst[j].fid);
> + pr_err(FW_BUG "two low fids - %d : 0x%x\n", j,
> + pst[j].fid);
> return -EINVAL;
> }
> if (pst[j].fid < lastfid)
> lastfid = pst[j].fid;
> }
> if (lastfid & 1) {
> - printk(KERN_ERR FW_BUG PFX "lastfid invalid\n");
> + pr_err(FW_BUG "lastfid invalid\n");
> return -EINVAL;
> }
> if (lastfid > LO_FID_TABLE_TOP)
> - printk(KERN_INFO FW_BUG PFX
> - "first fid not from lo freq table\n");
> + pr_info(FW_BUG "first fid not from lo freq table\n");
>
> return 0;
> }
> @@ -582,16 +559,14 @@ static void print_basics(struct powernow_k8_data *data)
> for (j = 0; j < data->numps; j++) {
> if (data->powernow_table[j].frequency !=
> CPUFREQ_ENTRY_INVALID) {
> - printk(KERN_INFO PFX
> - "fid 0x%x (%d MHz), vid 0x%x\n",
> - data->powernow_table[j].driver_data &
> 0xff,
> - data->powernow_table[j].frequency/1000,
> - data->powernow_table[j].driver_data >>
> 8);
> + pr_info("fid 0x%x (%d MHz), vid 0x%x\n",
> + data->powernow_table[j].driver_data & 0xff,
> + data->powernow_table[j].frequency/1000,
> + data->powernow_table[j].driver_data >> 8);
> }
> }
> if (data->batps)
> - printk(KERN_INFO PFX "Only %d pstates on battery\n",
> - data->batps);
> + pr_info("Only %d pstates on battery\n", data->batps);
> }
>
> static int fill_powernow_table(struct powernow_k8_data *data,
> @@ -602,21 +577,20 @@ static int fill_powernow_table(struct powernow_k8_data
> *data,
>
> if (data->batps) {
> /* use ACPI support to get full speed on mains power */
> - printk(KERN_WARNING PFX
> - "Only %d pstates usable (use ACPI driver for full "
> - "range\n", data->batps);
> + pr_warn("Only %d pstates usable (use ACPI driver for full
> range\n",
> + data->batps);
> data->numps = data->batps;
> }
>
> for (j = 1; j < data->numps; j++) {
> if (pst[j-1].fid >= pst[j].fid) {
> - printk(KERN_ERR PFX "PST out of sequence\n");
> + pr_err("PST out of sequence\n");
> return -EINVAL;
> }
> }
>
> if (data->numps < 2) {
> - printk(KERN_ERR PFX "no p states to transition\n");
> + pr_err("no p states to transition\n");
> return -ENODEV;
> }
>
> @@ -626,14 +600,16 @@ static int fill_powernow_table(struct powernow_k8_data
> *data,
> powernow_table = kzalloc((sizeof(*powernow_table)
> * (data->numps + 1)), GFP_KERNEL);
> if (!powernow_table) {
> - printk(KERN_ERR PFX "powernow_table memory alloc failure\n");
> + pr_err("powernow_table memory alloc failure\n");
> return -ENOMEM;
> }
>
> for (j = 0; j < data->numps; j++) {
> int freq;
> - powernow_table[j].driver_data = pst[j].fid; /* lower 8 bits */
> - powernow_table[j].driver_data |= (pst[j].vid << 8); /* upper 8
> bits */
> + /* lower 8 bits */
> + powernow_table[j].driver_data = pst[j].fid;
> + /* upper 8 bits */
> + powernow_table[j].driver_data |= (pst[j].vid << 8);
> freq = find_khz_freq_from_fid(pst[j].fid);
> powernow_table[j].frequency = freq;
> }
> @@ -681,13 +657,13 @@ static int find_psb_table(struct powernow_k8_data *data)
>
> pr_debug("table vers: 0x%x\n", psb->tableversion);
> if (psb->tableversion != PSB_VERSION_1_4) {
> - printk(KERN_ERR FW_BUG PFX "PSB table is not v1.4\n");
> + pr_err(FW_BUG "PSB table is not v1.4\n");
> return -ENODEV;
> }
>
> pr_debug("flags: 0x%x\n", psb->flags1);
> if (psb->flags1) {
> - printk(KERN_ERR FW_BUG PFX "unknown flags\n");
> + pr_err(FW_BUG "unknown flags\n");
> return -ENODEV;
> }
>
> @@ -704,7 +680,8 @@ static int find_psb_table(struct powernow_k8_data *data)
>
> pr_debug("ramp voltage offset: %d\n", data->rvo);
> pr_debug("isochronous relief time: %d\n", data->irt);
> - pr_debug("maximum voltage step: %d - 0x%x\n", mvs,
> data->vidmvs);
> + pr_debug("maximum voltage step: %d - 0x%x\n", mvs,
> + data->vidmvs);
>
> pr_debug("numpst: 0x%x\n", psb->num_tables);
> cpst = psb->num_tables;
> @@ -716,7 +693,7 @@ static int find_psb_table(struct powernow_k8_data *data)
> cpst = 1;
> }
> if (cpst != 1) {
> - printk(KERN_ERR FW_BUG PFX "numpst must be 1\n");
> + pr_err(FW_BUG "numpst must be 1\n");
> return -ENODEV;
> }
>
> @@ -742,9 +719,8 @@ static int find_psb_table(struct powernow_k8_data *data)
> * BIOS and Kernel Developer's Guide, which is available on
> * www.amd.com
> */
> - printk(KERN_ERR FW_BUG PFX "No PSB or ACPI _PSS objects\n");
> - printk(KERN_ERR PFX "Make sure that your BIOS is up to date"
> - " and Cool'N'Quiet support is enabled in BIOS setup\n");
> + pr_err(FW_BUG "No PSB or ACPI _PSS objects\n");
> + pr_err("Make sure that your BIOS is up to date and Cool'N'Quiet support
> is enabled in BIOS setup\n");
> return -ENODEV;
> }
>
> @@ -819,8 +795,7 @@ static int powernow_k8_cpu_init_acpi(struct
> powernow_k8_data *data)
> acpi_processor_notify_smm(THIS_MODULE);
>
> if (!zalloc_cpumask_var(&data->acpi_data.shared_cpu_map, GFP_KERNEL)) {
> - printk(KERN_ERR PFX
> - "unable to alloc powernow_k8_data cpumask\n");
> + pr_err("unable to alloc powernow_k8_data cpumask\n");
> ret_val = -ENOMEM;
> goto err_out_mem;
> }
> @@ -885,9 +860,8 @@ static int fill_powernow_table_fidvid(struct
> powernow_k8_data *data,
> }
>
> if (freq != (data->acpi_data.states[i].core_frequency * 1000)) {
> - printk(KERN_INFO PFX "invalid freq entries "
> - "%u kHz vs. %u kHz\n", freq,
> - (unsigned int)
> + pr_info("invalid freq entries %u kHz vs. %u kHz\n",
> + freq, (unsigned int)
> (data->acpi_data.states[i].core_frequency
> * 1000));
> invalidate_entry(powernow_table, i);
> @@ -916,7 +890,7 @@ static int get_transition_latency(struct powernow_k8_data
> *data)
> max_latency = cur_latency;
> }
> if (max_latency == 0) {
> - pr_err(FW_WARN PFX "Invalid zero transition latency\n");
> + pr_err(FW_WARN "Invalid zero transition latency\n");
> max_latency = 1;
> }
> /* value in usecs, needs to be in nanoseconds */
> @@ -991,7 +965,7 @@ static long powernowk8_target_fn(void *arg)
> checkvid = data->currvid;
>
> if (pending_bit_stuck()) {
> - printk(KERN_ERR PFX "failing targ, change pending bit set\n");
> + pr_err("failing targ, change pending bit set\n");
> return -EIO;
> }
>
> @@ -1007,8 +981,7 @@ static long powernowk8_target_fn(void *arg)
>
> if ((checkvid != data->currvid) ||
> (checkfid != data->currfid)) {
> - pr_info(PFX
> - "error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
> + pr_info("error - out of sync, fix 0x%x 0x%x, vid 0x%x 0x%x\n",
> checkfid, data->currfid,
> checkvid, data->currvid);
> }
> @@ -1020,7 +993,7 @@ static long powernowk8_target_fn(void *arg)
> ret = transition_frequency_fidvid(data, newstate);
>
> if (ret) {
> - printk(KERN_ERR PFX "transition frequency failed\n");
> + pr_err("transition frequency failed\n");
> mutex_unlock(&fidvid_mutex);
> return 1;
> }
> @@ -1049,7 +1022,7 @@ static void powernowk8_cpu_init_on_cpu(void
> *_init_on_cpu)
> struct init_on_cpu *init_on_cpu = _init_on_cpu;
>
> if (pending_bit_stuck()) {
> - printk(KERN_ERR PFX "failing init, change pending bit set\n");
> + pr_err("failing init, change pending bit set\n");
> init_on_cpu->rc = -ENODEV;
> return;
> }
> @@ -1066,9 +1039,12 @@ static void powernowk8_cpu_init_on_cpu(void
> *_init_on_cpu)
>
> static const char missing_pss_msg[] =
> KERN_ERR
> - FW_BUG PFX "No compatible ACPI _PSS objects found.\n"
> - FW_BUG PFX "First, make sure Cool'N'Quiet is enabled in the BIOS.\n"
> - FW_BUG PFX "If that doesn't help, try upgrading your BIOS.\n";
> + FW_BUG KBUILD_MODNAME
> + "No compatible ACPI _PSS objects found.\n"
> + FW_BUG KBUILD_MODNAME
> + "First, make sure Cool'N'Quiet is enabled in the BIOS.\n"
> + FW_BUG KBUILD_MODNAME
> + "If that doesn't help, try upgrading your BIOS.\n";
>
> /* per CPU init entry point to the driver */
> static int powernowk8_cpu_init(struct cpufreq_policy *pol)
> @@ -1083,7 +1059,7 @@ static int powernowk8_cpu_init(struct cpufreq_policy
> *pol)
>
> data = kzalloc(sizeof(*data), GFP_KERNEL);
> if (!data) {
> - printk(KERN_ERR PFX "unable to alloc powernow_k8_data");
> + pr_err("unable to alloc powernow_k8_data");
> return -ENOMEM;
> }
>
> @@ -1099,9 +1075,7 @@ static int powernowk8_cpu_init(struct cpufreq_policy
> *pol)
> goto err_out;
> }
> if (pol->cpu != 0) {
> - printk(KERN_ERR FW_BUG PFX "No ACPI _PSS objects for "
> - "CPU other than CPU0. Complain to your BIOS "
> - "vendor.\n");
> + pr_err(FW_BUG "No ACPI _PSS objects for CPU other than
> CPU0. Complain to your BIOS vendor.\n");
> goto err_out;
> }
> rc = find_psb_table(data);
> @@ -1129,7 +1103,7 @@ static int powernowk8_cpu_init(struct cpufreq_policy
> *pol)
>
> /* min/max the cpu is capable of */
> if (cpufreq_table_validate_and_show(pol, data->powernow_table)) {
> - printk(KERN_ERR FW_BUG PFX "invalid powernow_table\n");
> + pr_err(FW_BUG "invalid powernow_table\n");
> powernow_k8_cpu_exit_acpi(data);
> kfree(data->powernow_table);
> kfree(data);
> @@ -1220,12 +1194,12 @@ static void __request_acpi_cpufreq(void)
> goto request;
>
> if (strncmp(cur_drv, drv, min_t(size_t, strlen(cur_drv), strlen(drv))))
> - pr_warn(PFX "WTF driver: %s\n", cur_drv);
> + pr_warn("WTF driver: %s\n", cur_drv);
>
> return;
>
> request:
> - pr_warn(PFX "This CPU is not supported anymore, using acpi-cpufreq
> instead.\n");
> + pr_warn("This CPU is not supported anymore, using acpi-cpufreq
> instead.\n");
> request_module(drv);
> }
>
> @@ -1260,7 +1234,7 @@ static int powernowk8_init(void)
> if (ret)
> return ret;
>
> - pr_info(PFX "Found %d %s (%d cpu cores) (" VERSION ")\n",
> + pr_info("Found %d %s (%d cpu cores) (" VERSION ")\n",
> num_online_nodes(), boot_cpu_data.x86_model_id, supported_cpus);
>
> return ret;
> @@ -1274,8 +1248,8 @@ static void __exit powernowk8_exit(void)
> cpufreq_unregister_driver(&cpufreq_amd64_driver);
> }
>
> -MODULE_AUTHOR("Paul Devriendt <paul.devrie...@amd.com> and "
> - "Mark Langsdorf <mark.langsd...@amd.com>");
> +MODULE_AUTHOR("Paul Devriendt <paul.devrie...@amd.com>");
> +MODULE_AUTHOR("Mark Langsdorf <mark.langsd...@amd.com>");
> MODULE_DESCRIPTION("AMD Athlon 64 and Opteron processor frequency driver.");
> MODULE_LICENSE("GPL");
>
> diff --git a/drivers/cpufreq/powernow-k8.h b/drivers/cpufreq/powernow-k8.h
> index 79329d4..0f4aa07 100644
> --- a/drivers/cpufreq/powernow-k8.h
> +++ b/drivers/cpufreq/powernow-k8.h
> @@ -19,7 +19,7 @@ struct powernow_k8_data {
> u32 vidmvs; /* usable value calculated from mvs */
> u32 vstable; /* voltage stabilization time, units 20 us */
> u32 plllock; /* pll lock time, units 1 us */
> - u32 exttype; /* extended interface = 1 */
> + u32 exttype; /* extended interface = 1 */
>
> /* keep track of the current fid / vid or pstate */
> u32 currvid;
> @@ -182,9 +182,12 @@ struct pst_s {
>
> static int core_voltage_pre_transition(struct powernow_k8_data *data,
> u32 reqvid, u32 regfid);
> -static int core_voltage_post_transition(struct powernow_k8_data *data, u32
> reqvid);
> +static int core_voltage_post_transition(struct powernow_k8_data *data,
> + u32 reqvid);
> static int core_frequency_transition(struct powernow_k8_data *data, u32
> reqfid);
>
> -static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
> unsigned int index);
> +static void powernow_k8_acpi_pst_values(struct powernow_k8_data *data,
> + unsigned int index);
>
> -static int fill_powernow_table_fidvid(struct powernow_k8_data *data, struct
> cpufreq_frequency_table *powernow_table);
> +static int fill_powernow_table_fidvid(struct powernow_k8_data *data,
> + struct cpufreq_frequency_table *powernow_table);
>
--
I speak only for myself.
Rafael J. Wysocki, Intel Open Source Technology Center.
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
