[+cc Rafael]
On Fri, Apr 11, 2014 at 02:24:59AM +0200, Andreas Noever wrote:
> This patch makes changes to the pcieport driver to support thunderbolt
> suspend/resume on apple systems. We need to perform two different
> actions during suspend and resume:
>
> The whole controller has to be powered down before suspend. If this is
> not done then the NHI device will be gone after resume if a thunderbolt
> device was plugged in while suspending. The controller represents itself
> as multiple PCI devices/bridges. To power it down we hook into the
> upstream bridge of the controller and call the magic ACPI methods. Power
> will be restored automatically during resume (by the firmware
> presumably).
>
> During resume we have to wait for the NHI do reestablish all pci
> tunnels. Since there is no parent-child relationship between the NHI
> and the bridges we have to explicitly wait for them using
> device_pm_wait_for_dev. We do this in the resume_noirq phase of the
> downstream bridges of the controller (which lead into the thunderbolt
> tunnels).
>
> Signed-off-by: Andreas Noever <andreas.noe...@gmail.com>
> ---
> drivers/pci/pcie/portdrv_pci.c | 117
> +++++++++++++++++++++++++++++++++++++++++
> 1 file changed, 117 insertions(+)
>
> diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
> index 0d8fdc4..6d33666 100644
> --- a/drivers/pci/pcie/portdrv_pci.c
> +++ b/drivers/pci/pcie/portdrv_pci.c
> @@ -17,6 +17,9 @@
> #include <linux/aer.h>
> #include <linux/dmi.h>
> #include <linux/pci-aspm.h>
> +#include <linux/delay.h>
> +#include <linux/dmi.h>
> +#include <linux/acpi.h>
>
> #include "portdrv.h"
> #include "aer/aerdrv.h"
> @@ -79,6 +82,114 @@ static int pcie_portdrv_restore_config(struct pci_dev
> *dev)
> }
>
> #ifdef CONFIG_PM
> +
> +#if defined(CONFIG_THUNDERBOLT) || defined(CONFIG_THUNDERBOLT_MODULE)
> +
> +bool is_thunderbolt(struct pci_dev *pdev)
> +{
> + if (!dmi_match(DMI_PRODUCT_NAME, "MacBookPro10,1"))
> + return false;
> + return pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == 0x1547;
> +}
> +
> +static void shutdown_thunderbolt_controller(struct pci_dev *pdev)
> +{
> + /*
> + * The thunderbolt controller consists of a pcie switch with downstream
> + * bridges leading to the NHI (native host interface) and to the tunnel
> + * pci bridges.
> + *
> + * Without the following quirk the NHI will not resume if a tb device
> was
> + * plugged in before suspend.
> + *
> + * This quirk cuts power to the whole chip. Therefore we have to apply
> it
> + * during suspend_noirq of the upstream bridge.
> + *
> + * Power is automagically restored before resume. No action is needed.
> + */
> + acpi_handle bridge, SXIO, SXFP, SXLV;
> + if (!is_thunderbolt(pdev))
> + return;
> + if (pci_pcie_type(pdev) != PCI_EXP_TYPE_UPSTREAM)
> + return;
> + bridge = ACPI_HANDLE(&pdev->dev);
> + if (!bridge)
> + return;
> + /*
> + * TB bridges in external devices might have the same device id as those
> + * on the host, but they will not have the associated ACPI methods. This
> + * implicitly checks that we are at the right bridge.
> + */
> + if (ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXIO", &SXIO))
> + || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXFP",
> &SXFP))
> + || ACPI_FAILURE(acpi_get_handle(bridge, "DSB0.NHI0.SXLV",
> &SXLV)))
> + return;
Hmm, this is pretty ugly because the ACPI names are up to the BIOS writer
so we can't really rely on them.
You could put this sort of thing in a quirk, but I wouldn't be happy
about putting it in a generic place like this. Same with the magic
sequence below.
Maybe a quirk that sets function pointers that we could call here?
> + dev_info(&pdev->dev, "cutting power to thunderbolt controller...\n");
> +
> + /* save registers manually, the pci core won't be able to do later */
> + pci_save_state(pdev);
> + pci_prepare_to_sleep(pdev);
> +
> + /* magic sequence */
> + acpi_execute_simple_method(SXIO, NULL, 1);
> + acpi_execute_simple_method(SXFP, NULL, 0);
> + msleep(300);
> + acpi_execute_simple_method(SXLV, NULL, 0);
> + acpi_execute_simple_method(SXIO, NULL, 0);
> + acpi_execute_simple_method(SXLV, NULL, 0);
> +}
> +
> +static void wait_for_thunderbolt_controller(struct pci_dev *pdev)
> +{
> + struct pci_dev *sibling = NULL;
> + struct pci_dev *nhi = NULL;
> + /*
> + * During suspend the thunderbolt controller is reset and all pci
> + * tunnels are lost. The NHI driver will try to reestablish all tunnels
> + * during resume. We have to manually wait for the NHI since there is
> + * no parent child relationship between the NHI and the tunneled
> + * bridges.
> + */
> + if (!is_thunderbolt(pdev))
> + return;
> + if (pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM)
> + return;
> + /*
> + * Find the NHI and confirm that we are a bridge on the tb host
> + * controller and not on a tb endpoint.
> + */
> + sibling = pci_get_slot(pdev->bus, 0x0);
> + if (sibling == pdev)
> + goto out; /* we are the downstream bridge to the NHI */
> + if (!sibling || !sibling->subordinate)
> + goto out;
> + nhi = pci_get_slot(sibling->subordinate, 0x0);
> + if (!nhi)
> + goto out;
> + if (nhi->vendor != PCI_VENDOR_ID_INTEL || nhi->device != 0x1547
> + || nhi->subsystem_vendor != 0x2222
> + || nhi->subsystem_device != 0x1111)
> + goto out;
> + dev_info(&pdev->dev, "wating for thunderbolt to reestablish pci
> tunnels...\n");
> + device_pm_wait_for_dev(&pdev->dev, &nhi->dev);
> +out:
> + pci_dev_put(sibling);
> + pci_dev_put(nhi);
> +}
> +
> +#else
> +
> +static void shutdown_thunderbolt_controller(struct pci_dev *pdev) { }
> +static void wait_for_thunderbolt_controller(struct pci_dev *pdev) { }
> +
> +#endif
> +
> +int pcie_port_suspend_noirq(struct device *dev)
> +{
> + shutdown_thunderbolt_controller(to_pci_dev(dev));
> + return 0;
> +}
> +
> static int pcie_port_resume_noirq(struct device *dev)
> {
> struct pci_dev *pdev = to_pci_dev(dev);
> @@ -90,6 +201,9 @@ static int pcie_port_resume_noirq(struct device *dev)
> */
> if (pci_pcie_type(pdev) == PCI_EXP_TYPE_ROOT_PORT)
> pcie_clear_root_pme_status(pdev);
> +
> + wait_for_thunderbolt_controller(pdev);
> +
> return 0;
> }
>
> @@ -171,7 +285,10 @@ static const struct dev_pm_ops pcie_portdrv_pm_ops = {
> .thaw = pcie_port_device_resume,
> .poweroff = pcie_port_device_suspend,
> .restore = pcie_port_device_resume,
> + .suspend_noirq = pcie_port_suspend_noirq,
> .resume_noirq = pcie_port_resume_noirq,
> + .poweroff_noirq = pcie_port_suspend_noirq,
> + .restore_noirq = pcie_port_resume_noirq,
> .runtime_suspend = pcie_port_runtime_suspend,
> .runtime_resume = pcie_port_runtime_resume,
> .runtime_idle = pcie_port_runtime_idle,
> --
> 1.9.2
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
