We also need to know what part you're using. "lspci | grep Ethernet" should narrow that down.
Thanks. Todd Fujinaka Software Application Engineer Networking Division (ND) Intel Corporation todd.fujin...@intel.com (503) 712-4565 -----Original Message----- From: Borislav Petkov [mailto:b...@alien8.de] Sent: Thursday, April 10, 2014 5:00 AM To: e1000-de...@lists.sourceforge.net Cc: net...@vger.kernel.org; lkml Subject: [E1000-devel] e1000e 0000:00:19.0 eth0: Hardware Error Hi guys, I started getting those sporadic [133178.640890] e1000e 0000:00:19.0 eth0: Hardware Error [133179.293148] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133179.394226] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133179.397200] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready [133181.338258] e1000e 0000:00:19.0 eth0: Hardware Error [133182.077209] pci_pm_runtime_suspend(): e1000_runtime_suspend+0x0/0x40 [e1000e] returns -2 messages with 3.14 and I haven't had them before. After this, I do rmmod e1000e && modprobe e1000e and I get: [133221.891555] e1000e 0000:00:19.0 eth0: removed PHC [133228.181552] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133228.181562] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [133228.182241] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133228.182332] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133229.009837] e1000e: probe of 0000:00:19.0 failed with error -2 ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ [133307.107217] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133307.107228] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [133307.107814] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133307.107959] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133307.935921] e1000e: probe of 0000:00:19.0 failed with error -2 ... [133841.361905] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k [133841.361914] e1000e: Copyright(c) 1999 - 2013 Intel Corporation. [133841.362451] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode [133841.362520] e1000e 0000:00:19.0: irq 45 for MSI/MSI-X [133842.192710] e1000e: probe of 0000:00:19.0 failed with error -2 each time I try and eth0 is dead. Only a reboot helps, I've come to find out so far. Any ideas? -- Regards/Gruss, Boris. Sent from a fat crate under my desk. Formatting is fine. -- ------------------------------------------------------------------------------ Put Bad Developers to Shame Dominate Development with Jenkins Continuous Integration Continuously Automate Build, Test & Deployment Start a new project now. Try Jenkins in the cloud. http://p.sf.net/sfu/13600_Cloudbees _______________________________________________ E1000-devel mailing list e1000-de...@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel® Ethernet, visit http://communities.intel.com/community/wired -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
