On Fri, Apr 04, 2014 at 12:57:29PM -0700, Stephen Boyd wrote:
> Add support for the Krait CPU cache error detection. This is a
> simplified version of the code originally written by Stepan
> Moskovchenko[1] ported to the EDAC device framework.
>
> [1]
> https://www.codeaurora.org/cgit/quic/la/kernel/msm/tree/arch/arm/mach-msm/cache_erp.c?h=msm-3.4
>
> Cc: Stepan Moskovchenko <step...@codeaurora.org>
> Signed-off-by: Stephen Boyd <sb...@codeaurora.org>
> ---
> drivers/edac/Kconfig | 8 +
> drivers/edac/Makefile | 2 +
> drivers/edac/krait_edac.c | 370
> ++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 380 insertions(+)
> create mode 100644 drivers/edac/krait_edac.c
>
> diff --git a/drivers/edac/Kconfig b/drivers/edac/Kconfig
> index 878f09005fad..4dae3d353ea9 100644
> --- a/drivers/edac/Kconfig
> +++ b/drivers/edac/Kconfig
> @@ -368,4 +368,12 @@ config EDAC_OCTEON_PCI
> Support for error detection and correction on the
> Cavium Octeon family of SOCs.
>
> +config EDAC_KRAIT_CACHE
> + tristate "Krait L1/L2 Cache"
> + depends on EDAC_MM_EDAC && ARM && OF
> + select KRAIT_L2_ACCESSORS
> + help
> + Support for error detection and correction on the
> + Krait L1/L2 cache controller.
> +
> endif # EDAC
> diff --git a/drivers/edac/Makefile b/drivers/edac/Makefile
> index 4154ed6a02c6..b6ea50564223 100644
> --- a/drivers/edac/Makefile
> +++ b/drivers/edac/Makefile
> @@ -64,3 +64,5 @@ obj-$(CONFIG_EDAC_OCTEON_PC) +=
> octeon_edac-pc.o
> obj-$(CONFIG_EDAC_OCTEON_L2C) += octeon_edac-l2c.o
> obj-$(CONFIG_EDAC_OCTEON_LMC) += octeon_edac-lmc.o
> obj-$(CONFIG_EDAC_OCTEON_PCI) += octeon_edac-pci.o
> +
> +obj-$(CONFIG_EDAC_KRAIT_CACHE) += krait_edac.o
> diff --git a/drivers/edac/krait_edac.c b/drivers/edac/krait_edac.c
> new file mode 100644
> index 000000000000..90ec0e982927
> --- /dev/null
> +++ b/drivers/edac/krait_edac.c
> @@ -0,0 +1,370 @@
> +/* Copyright (c) 2012-2013, The Linux Foundation. All rights reserved.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 and
> + * only version 2 as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/platform_device.h>
> +#include <linux/module.h>
> +#include <linux/err.h>
> +#include <linux/cpu.h>
> +#include <linux/io.h>
> +#include <linux/of.h>
> +#include <linux/of_irq.h>
> +#include <linux/of_platform.h>
> +
> +#include <asm/krait-l2-accessors.h>
> +
> +#include "edac_core.h"
> +
> +#define CESR_DCTPE BIT(0)
> +#define CESR_DCDPE BIT(1)
> +#define CESR_ICTPE BIT(2)
> +#define CESR_ICDPE BIT(3)
> +#define CESR_DCTE (BIT(4) | BIT(5))
> +#define CESR_ICTE (BIT(6) | BIT(7))
> +#define CESR_TLBMH BIT(16)
> +#define CESR_I_MASK 0x000000cc
> +/* Print a message for everything but TLB MH events */
> +#define CESR_PRINT_MASK 0x000000ff
> +
> +#define L2ESR 0x204
> +#define L2ESR_MPDCD BIT(0)
> +#define L2ESR_MPSLV BIT(1)
> +#define L2ESR_TSESB BIT(2)
> +#define L2ESR_TSEDB BIT(3)
> +#define L2ESR_DSESB BIT(4)
> +#define L2ESR_DSEDB BIT(5)
> +#define L2ESR_MSE BIT(6)
> +#define L2ESR_MPLDREXNOK BIT(8)
> +#define L2ESR_CPU_MASK 0xf
> +#define L2ESR_CPU_SHIFT 16
> +#define L2ESR_SP BIT(20)
> +
> +#define L2ESYNR0 0x208
> +#define L2ESYNR1 0x209
> +#define L2EAR0 0x20c
> +#define L2EAR1 0x20d
> +
> +struct krait_edac {
> + int l1_irq;
> + struct edac_device_ctl_info * __percpu *edev;
> + struct notifier_block notifier;
> +};
> +
> +struct krait_edac_error {
> + const char * const msg;
> + void (*func)(struct edac_device_ctl_info *edac_dev,
> + int inst_nr, int block_nr, const char *msg);
arg alignment (please start new line at the opening brace).
> +};
> +
> +static unsigned int read_cesr(void)
> +{
> + unsigned int cesr;
> +
> + asm volatile ("mrc p15, 7, %0, c15, c0, 1 @ cesr" : "=r" (cesr));
> + return cesr;
> +}
> +
> +static void write_cesr(unsigned int cesr)
> +{
> + asm volatile ("mcr p15, 7, %0, c15, c0, 1 @ cesr" : : "r" (cesr));
> +}
> +
> +static unsigned int read_cesynr(void)
> +{
> + unsigned int cesynr;
> +
> + asm volatile ("mrc p15, 7, %0, c15, c0, 3 @ cesynr" : "=r" (cesynr));
> + return cesynr;
> +}
> +
> +static irqreturn_t krait_l1_irq(int irq, void *dev_id)
> +{
> + struct edac_device_ctl_info **edac_p = dev_id;
> + struct edac_device_ctl_info *edac = *edac_p;
> + unsigned int cesr = read_cesr();
> + unsigned int i_cesynr, d_cesynr;
> + unsigned int cpu = smp_processor_id();
> + int print_regs = cesr & CESR_PRINT_MASK;
> + int i;
> + static const struct krait_edac_error errors[] = {
> + { "D-cache tag parity error", edac_device_handle_ue },
> + { "D-cache data parity error", edac_device_handle_ue },
> + { "I-cache tag parity error", edac_device_handle_ce },
> + { "I-cache data parity error", edac_device_handle_ce },
> + { "D-cache tag timing error", edac_device_handle_ue },
> + { "D-cache data timing error", edac_device_handle_ue },
> + { "I-cache tag timing error", edac_device_handle_ce },
> + { "I-cache data timing error", edac_device_handle_ce }
> + };
> +
> + if (print_regs) {
This variable is used only once here, you can simply do the binary and
test then and drop it:
if (cesr & CESR_PRINT_MASK)
> + pr_alert("L1 / TLB Error detected on CPU %d!\n", cpu);
> + pr_alert("CESR = 0x%08x\n", cesr);
You can use the edac_*_printk with KERN_ALERT as level which adds proper
prefixes.
> + }
> +
> + for (i = 0; i < ARRAY_SIZE(errors); i++)
> + if (BIT(i) & cesr)
> + errors[i].func(edac, cpu, 0, errors[i].msg);
Nice! Func ptr per error type :)
> +
> + if (cesr & CESR_TLBMH) {
> + asm ("mcr p15, 0, r0, c8, c7, 0");
> + edac_device_handle_ce(edac, cpu, 0, "TLB Multi-Hit error");
> + }
> +
> + if (cesr & (CESR_ICTPE | CESR_ICDPE | CESR_ICTE)) {
> + i_cesynr = read_cesynr();
> + pr_alert("I-side CESYNR = 0x%08x\n", i_cesynr);
edac_printk
and also, this message looks a bit cryptic for issuing it at ALERT
level. I'm ssuming people won't come to you and ask you what it
means...? :)
> + write_cesr(CESR_I_MASK);
> +
> + /*
> + * Clear the I-side bits from the captured CESR value so that we
> + * don't accidentally clear any new I-side errors when we do
> + * the CESR write-clear operation.
> + */
> + cesr &= ~CESR_I_MASK;
> + }
> +
> + if (cesr & (CESR_DCTPE | CESR_DCDPE | CESR_DCTE)) {
> + d_cesynr = read_cesynr();
> + pr_alert("D-side CESYNR = 0x%08x\n", d_cesynr);
Ditto.
> + }
> +
> + /* Clear the interrupt bits we processed */
> + write_cesr(cesr);
> +
> + return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t krait_l2_irq(int irq, void *dev_id)
> +{
> + struct edac_device_ctl_info *edac = dev_id;
> + unsigned int l2esr;
> + unsigned int l2esynr0;
> + unsigned int l2esynr1;
> + unsigned int l2ear0;
> + unsigned int l2ear1;
> + unsigned long cpu;
> + int i;
> + static const struct krait_edac_error errors[] = {
> + { "master port decode error", edac_device_handle_ce },
> + { "master port slave error", edac_device_handle_ce },
> + { "tag soft error, single-bit", edac_device_handle_ce },
> + { "tag soft error, double-bit", edac_device_handle_ue },
> + { "data soft error, single-bit", edac_device_handle_ce },
> + { "data soft error, double-bit", edac_device_handle_ue },
> + { "modified soft error", edac_device_handle_ce },
> + { "slave port exclusive monitor not available",
> + edac_device_handle_ue},
> + { "master port LDREX received Normal OK response",
> + edac_device_handle_ce },
> + };
> +
> + l2esr = krait_get_l2_indirect_reg(L2ESR);
> + pr_alert("Error detected!\n");
Why print this not very telling message here if errors[i].func() will
get the proper .msg later?
> + pr_alert("L2ESR = 0x%08x\n", l2esr);
> +
> + if (l2esr & (L2ESR_TSESB | L2ESR_TSEDB | L2ESR_MSE | L2ESR_SP)) {
> + l2esynr0 = krait_get_l2_indirect_reg(L2ESYNR0);
> + l2esynr1 = krait_get_l2_indirect_reg(L2ESYNR1);
> + l2ear0 = krait_get_l2_indirect_reg(L2EAR0);
> + l2ear1 = krait_get_l2_indirect_reg(L2EAR1);
> +
> + pr_alert("L2ESYNR0 = 0x%08x\n", l2esynr0);
> + pr_alert("L2ESYNR1 = 0x%08x\n", l2esynr1);
> + pr_alert("L2EAR0 = 0x%08x\n", l2ear0);
> + pr_alert("L2EAR1 = 0x%08x\n", l2ear1);
Also, please use edac_printk and consider making those messages
human-readable, otherwise it only confuses users.
> + }
> +
> + cpu = (l2esr >> L2ESR_CPU_SHIFT) & L2ESR_CPU_MASK;
> + cpu = __ffs(cpu);
> + if (cpu)
> + cpu--;
...
--
Regards/Gruss,
Boris.
Sent from a fat crate under my desk. Formatting is fine.
--
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
