I wasn't sure on the length, so I looked it up and documented it.
Signed-off-by: David Fries <da...@fries.net>
---
drivers/w1/w1_netlink.h | 25 +++++++++++++++++++++++++
1 file changed, 25 insertions(+)
diff --git a/drivers/w1/w1_netlink.h b/drivers/w1/w1_netlink.h
index 1e9504e..c646a98 100644
--- a/drivers/w1/w1_netlink.h
+++ b/drivers/w1/w1_netlink.h
@@ -49,6 +49,19 @@ enum w1_netlink_message_types {
W1_LIST_MASTERS,
};
+/**
+ * struct w1_netlink_msg - holds w1 message type, id, and result
+ *
+ * @type: one of enum w1_netlink_message_types
+ * @status: kernel feedback for success 0 or errno failure value
+ * @len: length of data following w1_netlink_msg
+ * @id: union holding master bus id (msg.id) and slave device id (id[8]).
+ * @data: start address of any following data
+ *
+ * The base message structure for w1 messages over netlink.
+ * The netlink connector data sequence is, struct nlmsghdr, struct cn_msg,
+ * then one or more struct w1_netlink_msg (each with optional data).
+ */
struct w1_netlink_msg
{
__u8 type;
@@ -66,6 +79,7 @@ struct w1_netlink_msg
/**
* enum w1_commands - commands available for master or slave operations
+ *
* @W1_CMD_READ: read len bytes
* @W1_CMD_WRITE: write len bytes
* @W1_CMD_SEARCH: initiate a standard search, returns only the slave
@@ -93,6 +107,17 @@ enum w1_commands {
W1_CMD_MAX
};
+/**
+ * struct w1_netlink_cmd - holds the command and data
+ *
+ * @cmd: one of enum w1_commands
+ * @res: reserved
+ * @len: length of data following w1_netlink_cmd
+ * @data: start address of any following data
+ *
+ * One or more struct w1_netlink_cmd is placed starting at w1_netlink_msg.data
+ * each with optional data.
+ */
struct w1_netlink_cmd
{
__u8 cmd;
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
