I set the in-reply-to to try to put my new patch here, but failed.
I need to figure it out.
From: Joe Xue <lg...@hotmail.com>
The LED pattern trigger allows LEDs blink in user defined pattern.
v2: Change the pattern memory from fixed static to malloc
Change the timer schedule way to save cpu time
Add the mutex to protect the pattern operation
new file: Documentation/leds/ledtrig-pattern.txt
modified: drivers/leds/trigger/Kconfig
modified: drivers/leds/trigger/Makefile
new file: drivers/leds/trigger/ledtrig-pattern.c
Suggested-by: Pavel Machek <pa...@ucw.cz>
Signed-off-by: Joe Xue <lg...@hotmail.com>
---
Documentation/leds/ledtrig-pattern.txt | 60 +++++++++
drivers/leds/trigger/Kconfig | 9 ++
drivers/leds/trigger/Makefile | 1 +
drivers/leds/trigger/ledtrig-pattern.c | 233 +++++++++++++++++++++++++++++++++
4 files changed, 303 insertions(+)
create mode 100644 Documentation/leds/ledtrig-pattern.txt
create mode 100644 drivers/leds/trigger/ledtrig-pattern.c
diff --git a/Documentation/leds/ledtrig-pattern.txt
b/Documentation/leds/ledtrig-pattern.txt
new file mode 100644
index 0000000..4b546c3
--- /dev/null
+++ b/Documentation/leds/ledtrig-pattern.txt
@@ -0,0 +1,60 @@
+LED Pattern Trigger
+===================
+
+0. Introduction
+
+LED Pattern trigger is designed to let LEDs indicate the patterns defined by
+users. This is very useful for those scenarios where only one non-color led
+needs to indicate different states.
+
+1. How to use
+
+Pattern trigger can be enabled and disabled from user space on led class
+devices that support this trigger as shown below:
+
+ echo pattern> trigger
+
+When the pattern trigger is activated, it will get the current brightness as
+its brightness if the led is on. Otherwise, it will use the maximum brightness.
+
+If the led supports different values rather than ON/OFF, the brightness can be
+set in advance before enabling the trigger.
+
+ echo 128> brightness
+ echo pattern> trigger
+
+Two properties are exported. They are delay_unit and pattern.
+
+ delay_unit - a delay time unit, default value is 125 ms
+ pattern - blink pattern, includes three legal characters
+ '#', ' '(space), and '/'
+ '#' let LED on and last delay_unit long time
+ ' ' let LED off and last delay_unit long time
+ '/' stop pattern
+ pattern will be repeated without it
+
+3. Examples
+
+ Example 1
+
+ echo pattern> trigger
+ echo "# ## /"
+
+ The behaviour is like below:
+
+ on(125ms)off(125ms)on(250ms)off
+ This is Morse code 'A'
+
+ Example 2
+
+ echo pattern> trigger
+ echo 200> delay_unit
+ echo "# # "
+
+ The behaviour is like below:
+
+ on(200ms)off(200ms)on(200ms)off(800ms)
+ on(200ms)off(200ms)on(200ms)off(800ms)
+ ...(Repeat)
+
+ This is 2 times burst blinking.
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index 49794b4..23d0967 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -108,4 +108,13 @@ config LEDS_TRIGGER_CAMERA
This enables direct flash/torch on/off by the driver, kernel space.
If unsure, say Y.
+config LEDS_TRIGGER_PATTERN
+ tristate "LED Pattern Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to blink in a user defined pattern controlled via
+ sysfs. It's useful to notify different states by using one led.
+ For more details read Documentation/leds/leds-pattern.txt.
+ If unsure, say Y.
+
endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
index 1abf48d..a739429 100644
--- a/drivers/leds/trigger/Makefile
+++ b/drivers/leds/trigger/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
+obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o
diff --git a/drivers/leds/trigger/ledtrig-pattern.c
b/drivers/leds/trigger/ledtrig-pattern.c
new file mode 100644
index 0000000..9c688e7
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-pattern.c
@@ -0,0 +1,233 @@
+/*
+ * LED Kernel Morse Code Trigger
+ *
+ * Copyright (C) 2013 Joe Xue <lg...@hotmail.com>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c and Atsushi Nemoto's
+ * ledtrig-heartbeat.c and Shuah Khan's ledtrig-transient.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+struct pattern_trig_data {
+ unsigned long delay_unit;
+ unsigned long pattern_len;
+ unsigned long count;
+ int brightness_on;
+ char *pattern;
+ struct timer_list timer;
+ struct mutex pattern_mutex;
+};
+
+static void pattern_timer_function(unsigned long data)
+{
+ int repeat = 1;
+ struct led_classdev *led_cdev = (struct led_classdev *) data;
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+ char this = pattern_data->pattern[pattern_data->count];
+
+ if (this == '#') {
+ __led_set_brightness(led_cdev, pattern_data->brightness_on);
+ } else if (this == ' ') {
+ __led_set_brightness(led_cdev, LED_OFF);
+ /* stop blinking */
+ } else if (this == '/') {
+ return;
+ }
+
+ while (pattern_data->pattern[pattern_data->count + repeat] == this)
+ repeat++;
+
+ mod_timer(&pattern_data->timer,
+ jiffies + msecs_to_jiffies(pattern_data->delay_unit * repeat));
+
+ pattern_data->count += repeat;
+ if (pattern_data->count == pattern_data->pattern_len)
+ pattern_data->count = 0;
+}
+
+static ssize_t pattern_delay_unit_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+
+ return sprintf(buf, "%lu\n", pattern_data->delay_unit);
+}
+
+static ssize_t pattern_delay_unit_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+ unsigned long state;
+ ssize_t ret = -EINVAL;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ /* this value can't be 0 */
+ if (state == 0)
+ return -EINVAL;
+
+ pattern_data->delay_unit = state;
+
+ return size;
+}
+
+static ssize_t pattern_pattern_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+
+ if (pattern_data->pattern)
+ return scnprintf(buf, PAGE_SIZE, "%s\n",
+ pattern_data->pattern);
+ return 0;
+}
+
+static ssize_t pattern_pattern_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+ int i, len;
+ ssize_t ret = -EINVAL;
+
+ len = 0;
+
+ /* legality check */
+ for (i = 0; i < size; i++) {
+ if (buf[i] != ' ' && buf[i] != '#' && buf[i] != '/')
+ break;
+ len++;
+ }
+
+ if (len == 0)
+ return ret;
+
+ mutex_lock(&pattern_data->pattern_mutex);
+ kfree(pattern_data->pattern);
+ pattern_data->pattern = NULL;
+
+ pattern_data->pattern = kzalloc(len + 1, GFP_KERNEL);
+ if (!pattern_data->pattern) {
+ len = -ENOMEM;
+ goto unlock;
+ }
+ scnprintf(pattern_data->pattern, len + 1, "%s", buf);
+
+ del_timer_sync(&pattern_data->timer);
+
+ pattern_data->pattern_len = len;
+ pattern_data->count = 0;
+
+ mod_timer(&pattern_data->timer, jiffies + 1);
+unlock:
+ mutex_unlock(&pattern_data->pattern_mutex);
+ return size;
+}
+
+static DEVICE_ATTR(pattern, 0644, pattern_pattern_show, pattern_pattern_store);
+static DEVICE_ATTR(delay_unit, 0644,
+ pattern_delay_unit_show, pattern_delay_unit_store);
+
+static void pattern_trig_activate(struct led_classdev *led_cdev)
+{
+ int rc;
+ struct pattern_trig_data *tdata;
+
+ tdata = kzalloc(sizeof(struct pattern_trig_data), GFP_KERNEL);
+ if (!tdata) {
+ dev_err(led_cdev->dev,
+ "unable to allocate pattern trigger\n");
+ return;
+ }
+
+ led_cdev->trigger_data = tdata;
+
+ mutex_init(&tdata->pattern_mutex);
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_pattern);
+ if (rc)
+ goto err_out;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_delay_unit);
+ if (rc)
+ goto err_out_delay_unit;
+
+ /* default delay_unit 125ms */
+ tdata->delay_unit = 125;
+
+ setup_timer(&tdata->timer, pattern_timer_function,
+ (unsigned long) led_cdev);
+
+ tdata->brightness_on = led_get_brightness(led_cdev);
+ if (tdata->brightness_on == LED_OFF)
+ tdata->brightness_on = led_cdev->max_brightness;
+
+ __led_set_brightness(led_cdev, LED_OFF);
+ led_cdev->activated = true;
+
+ return;
+
+err_out_delay_unit:
+ device_remove_file(led_cdev->dev, &dev_attr_pattern);
+err_out:
+ dev_err(led_cdev->dev, "unable to register pattern trigger\n");
+ led_cdev->trigger_data = NULL;
+ kfree(tdata);
+}
+
+static void pattern_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+
+ if (led_cdev->activated) {
+ del_timer_sync(&pattern_data->timer);
+ device_remove_file(led_cdev->dev, &dev_attr_pattern);
+ device_remove_file(led_cdev->dev, &dev_attr_delay_unit);
+ led_cdev->trigger_data = NULL;
+ led_cdev->activated = false;
+ kfree(pattern_data->pattern);
+ kfree(pattern_data);
+ }
+ __led_set_brightness(led_cdev, LED_OFF);
+}
+
+static struct led_trigger pattern_trigger = {
+ .name = "pattern",
+ .activate = pattern_trig_activate,
+ .deactivate = pattern_trig_deactivate,
+};
+
+static int __init pattern_trig_init(void)
+{
+ return led_trigger_register(&pattern_trigger);
+}
+
+static void __exit pattern_trig_exit(void)
+{
+ led_trigger_unregister(&pattern_trigger);
+}
+
+module_init(pattern_trig_init);
+module_exit(pattern_trig_exit);
+
+MODULE_AUTHOR("Joe Xue <lg...@hotmail.com");
+MODULE_DESCRIPTION("Pattern LED trigger");
+MODULE_LICENSE("GPL");
--
1.8.3.2
----------------------------------------
> From: lg...@hotmail.com
> To: coolo...@gmail.com; rpur...@rpsys.net; r...@landley.net; milo....@ti.com;
> pa...@ucw.cz
> CC: lg...@hotmail.com; linux-l...@vger.kernel.org;
> linux-kernel@vger.kernel.org; linux-...@vger.kernel.org
> Subject: [PATCH] Add LED pattern trigger
> Date: Sun, 29 Dec 2013 19:11:15 -0500
>
> The LED pattern trigger allows LEDs blink in user defined pattern.
>
> new file: Documentation/leds/ledtrig-pattern.txt
> modified: drivers/leds/trigger/Kconfig
> modified: drivers/leds/trigger/Makefile
> new file: drivers/leds/trigger/ledtrig-pattern.c
>
> Suggested-by: Pavel Machek <pa...@ucw.cz>
> Signed-off-by: Joe Xue <lg...@hotmail.com>
> ---
> Documentation/leds/ledtrig-pattern.txt | 60 ++++++++++
> drivers/leds/trigger/Kconfig | 9 ++
> drivers/leds/trigger/Makefile | 1 +
> drivers/leds/trigger/ledtrig-pattern.c | 207 +++++++++++++++++++++++++++++++++
> 4 files changed, 277 insertions(+)
> create mode 100644 Documentation/leds/ledtrig-pattern.txt
> create mode 100644 drivers/leds/trigger/ledtrig-pattern.c
>
> diff --git a/Documentation/leds/ledtrig-pattern.txt
> b/Documentation/leds/ledtrig-pattern.txt
> new file mode 100644
> index 0000000..4b546c3
> --- /dev/null
> +++ b/Documentation/leds/ledtrig-pattern.txt
> @@ -0,0 +1,60 @@
> +LED Pattern Trigger
> +===================
> +
> +0. Introduction
> +
> +LED Pattern trigger is designed to let LEDs indicate the patterns defined by
> +users. This is very useful for those scenarios where only one non-color led
> +needs to indicate different states.
> +
> +1. How to use
> +
> +Pattern trigger can be enabled and disabled from user space on led class
> +devices that support this trigger as shown below:
> +
> + echo pattern> trigger
> +
> +When the pattern trigger is activated, it will get the current brightness as
> +its brightness if the led is on. Otherwise, it will use the maximum
> brightness.
> +
> +If the led supports different values rather than ON/OFF, the brightness can
> be
> +set in advance before enabling the trigger.
> +
> + echo 128> brightness
> + echo pattern> trigger
> +
> +Two properties are exported. They are delay_unit and pattern.
> +
> + delay_unit - a delay time unit, default value is 125 ms
> + pattern - blink pattern, includes three legal characters
> + '#', ' '(space), and '/'
> + '#' let LED on and last delay_unit long time
> + ' ' let LED off and last delay_unit long time
> + '/' stop pattern
> + pattern will be repeated without it
> +
> +3. Examples
> +
> + Example 1
> +
> + echo pattern> trigger
> + echo "# ## /"
> +
> + The behaviour is like below:
> +
> + on(125ms)off(125ms)on(250ms)off
> + This is Morse code 'A'
> +
> + Example 2
> +
> + echo pattern> trigger
> + echo 200> delay_unit
> + echo "# # "
> +
> + The behaviour is like below:
> +
> + on(200ms)off(200ms)on(200ms)off(800ms)
> + on(200ms)off(200ms)on(200ms)off(800ms)
> + ...(Repeat)
> +
> + This is 2 times burst blinking.
> diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
> index 49794b4..23d0967 100644
> --- a/drivers/leds/trigger/Kconfig
> +++ b/drivers/leds/trigger/Kconfig
> @@ -108,4 +108,13 @@ config LEDS_TRIGGER_CAMERA
> This enables direct flash/torch on/off by the driver, kernel space.
> If unsure, say Y.
>
> +config LEDS_TRIGGER_PATTERN
> + tristate "LED Pattern Trigger"
> + depends on LEDS_TRIGGERS
> + help
> + This allows LEDs to blink in a user defined pattern controlled via
> + sysfs. It's useful to notify different states by using one led.
> + For more details read Documentation/leds/leds-pattern.txt.
> + If unsure, say Y.
> +
> endif # LEDS_TRIGGERS
> diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
> index 1abf48d..a739429 100644
> --- a/drivers/leds/trigger/Makefile
> +++ b/drivers/leds/trigger/Makefile
> @@ -8,3 +8,4 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
> obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
> obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
> obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
> +obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o
> diff --git a/drivers/leds/trigger/ledtrig-pattern.c
> b/drivers/leds/trigger/ledtrig-pattern.c
> new file mode 100644
> index 0000000..80fc238
> --- /dev/null
> +++ b/drivers/leds/trigger/ledtrig-pattern.c
> @@ -0,0 +1,207 @@
> +/*
> + * LED Kernel Morse Code Trigger
> + *
> + * Copyright (C) 2013 Joe Xue <lg...@hotmail.com>
> + *
> + * Based on Richard Purdie's ledtrig-timer.c and Atsushi Nemoto's
> + * ledtrig-heartbeat.c and Shuah Khan's ledtrig-transient.c
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License version 2 as
> + * published by the Free Software Foundation.
> + *
> + */
> +
> +#include <linux/module.h>
> +#include <linux/kernel.h>
> +#include <linux/init.h>
> +#include <linux/device.h>
> +#include <linux/slab.h>
> +#include <linux/timer.h>
> +#include <linux/leds.h>
> +#include "../leds.h"
> +
> +#define MAX_PATTEN_LEN 255
> +
> +struct pattern_trig_data {
> + unsigned long delay_unit;
> + unsigned long pattern_len;
> + unsigned long count;
> + int brightness_on;
> + char pattern[MAX_PATTEN_LEN + 1];
> + struct timer_list timer;
> +};
> +
> +static void pattern_timer_function(unsigned long data)
> +{
> + struct led_classdev *led_cdev = (struct led_classdev *) data;
> + struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
> +
> + if (pattern_data->pattern[pattern_data->count] == '#') {
> + __led_set_brightness(led_cdev, pattern_data->brightness_on);
> + mod_timer(&pattern_data->timer,
> + jiffies + msecs_to_jiffies(pattern_data->delay_unit));
> + } else if (pattern_data->pattern[pattern_data->count] == ' ') {
> + __led_set_brightness(led_cdev, LED_OFF);
> + mod_timer(&pattern_data->timer,
> + jiffies + msecs_to_jiffies(pattern_data->delay_unit));
> + /* stop blinking */
> + } else if (pattern_data->pattern[pattern_data->count] == '/') {
> + return;
> + }
> +
> + pattern_data->count++;
> + if (pattern_data->count == pattern_data->pattern_len)
> + pattern_data->count = 0;
> +}
> +
> +static ssize_t pattern_delay_unit_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
> +
> + return sprintf(buf, "%lu\n", pattern_data->delay_unit);
> +}
> +
> +static ssize_t pattern_delay_unit_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t size)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
> + unsigned long state;
> + ssize_t ret = -EINVAL;
> +
> + ret = kstrtoul(buf, 10, &state);
> + if (ret)
> + return ret;
> +
> + pattern_data->delay_unit = state;
> +
> + return size;
> +}
> +
> +static ssize_t pattern_pattern_show(struct device *dev,
> + struct device_attribute *attr, char *buf)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
> +
> + return sprintf(buf, "%s\n", pattern_data->pattern);
> +}
> +
> +static ssize_t pattern_pattern_store(struct device *dev,
> + struct device_attribute *attr, const char *buf, size_t size)
> +{
> + struct led_classdev *led_cdev = dev_get_drvdata(dev);
> + struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
> + int i;
> + ssize_t ret = -EINVAL;
> +
> + int len = (size> MAX_PATTEN_LEN) ? MAX_PATTEN_LEN : (size - 1);
> +
> + /* legality check */
> + for (i = 0; i < len; i++) {
> + if (buf[i] != ' ' && buf[i] != '#' && buf[i] != '/')
> + return ret;
> + }
> +
> + del_timer_sync(&pattern_data->timer);
> +
> + memcpy(pattern_data->pattern, buf, len);
> + pattern_data->pattern[len] = '\0';
> + pattern_data->pattern_len = len;
> + pattern_data->count = 0;
> +
> + mod_timer(&pattern_data->timer, jiffies + 1);
> +
> + return size;
> +}
> +
> +static DEVICE_ATTR(pattern, 0644, pattern_pattern_show,
> pattern_pattern_store);
> +static DEVICE_ATTR(delay_unit, 0644,
> + pattern_delay_unit_show, pattern_delay_unit_store);
> +
> +static void pattern_trig_activate(struct led_classdev *led_cdev)
> +{
> + int rc;
> + struct pattern_trig_data *tdata;
> +
> + tdata = kzalloc(sizeof(struct pattern_trig_data), GFP_KERNEL);
> + if (!tdata) {
> + dev_err(led_cdev->dev,
> + "unable to allocate pattern trigger\n");
> + return;
> + }
> +
> + led_cdev->trigger_data = tdata;
> +
> + rc = device_create_file(led_cdev->dev, &dev_attr_pattern);
> + if (rc)
> + goto err_out;
> +
> + rc = device_create_file(led_cdev->dev, &dev_attr_delay_unit);
> + if (rc)
> + goto err_out_delay_unit;
> +
> + memset(tdata->pattern, 0, MAX_PATTEN_LEN + 1);
> + /* default delay_unit 125ms */
> + tdata->delay_unit = 125;
> +
> + setup_timer(&tdata->timer, pattern_timer_function,
> + (unsigned long) led_cdev);
> +
> + tdata->brightness_on = led_get_brightness(led_cdev);
> + if (tdata->brightness_on == LED_OFF)
> + tdata->brightness_on = led_cdev->max_brightness;
> +
> + __led_set_brightness(led_cdev, LED_OFF);
> + led_cdev->activated = true;
> +
> + return;
> +
> +err_out_delay_unit:
> + device_remove_file(led_cdev->dev, &dev_attr_pattern);
> +err_out:
> + dev_err(led_cdev->dev, "unable to register pattern trigger\n");
> + led_cdev->trigger_data = NULL;
> + kfree(tdata);
> +}
> +
> +static void pattern_trig_deactivate(struct led_classdev *led_cdev)
> +{
> + struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
> +
> + if (led_cdev->activated) {
> + del_timer_sync(&pattern_data->timer);
> + device_remove_file(led_cdev->dev, &dev_attr_pattern);
> + device_remove_file(led_cdev->dev, &dev_attr_delay_unit);
> + led_cdev->trigger_data = NULL;
> + led_cdev->activated = false;
> + kfree(pattern_data);
> + }
> + __led_set_brightness(led_cdev, LED_OFF);
> +}
> +
> +static struct led_trigger pattern_trigger = {
> + .name = "pattern",
> + .activate = pattern_trig_activate,
> + .deactivate = pattern_trig_deactivate,
> +};
> +
> +static int __init pattern_trig_init(void)
> +{
> + return led_trigger_register(&pattern_trigger);
> +}
> +
> +static void __exit pattern_trig_exit(void)
> +{
> + led_trigger_unregister(&pattern_trigger);
> +}
> +
> +module_init(pattern_trig_init);
> +module_exit(pattern_trig_exit);
> +
> +MODULE_AUTHOR("Joe Xue <lg...@hotmail.com");
> +MODULE_DESCRIPTION("Patten LED trigger");
> +MODULE_LICENSE("GPL");
> --
> 1.8.1.2
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
> the body of a message to majord...@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
> Please read the FAQ at http://www.tux.org/lkml/
> --
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
