From: Joe Xue <lg...@hotmail.com>
The LED pattern trigger allows LEDs blink in user defined pattern.
v2: Change the pattern memory from fixed static to malloc
Change the timer schedule way to save cpu time
Add the mutex to protect the pattern operation
new file: Documentation/leds/ledtrig-pattern.txt
modified: drivers/leds/trigger/Kconfig
modified: drivers/leds/trigger/Makefile
new file: drivers/leds/trigger/ledtrig-pattern.c
Suggested-by: Pavel Machek <pa...@ucw.cz>
Signed-off-by: Joe Xue <lg...@hotmail.com>
---
Documentation/leds/ledtrig-pattern.txt | 60 +++++++++
drivers/leds/trigger/Kconfig | 9 ++
drivers/leds/trigger/Makefile | 1 +
drivers/leds/trigger/ledtrig-pattern.c | 233 +++++++++++++++++++++++++++++++++
4 files changed, 303 insertions(+)
create mode 100644 Documentation/leds/ledtrig-pattern.txt
create mode 100644 drivers/leds/trigger/ledtrig-pattern.c
diff --git a/Documentation/leds/ledtrig-pattern.txt
b/Documentation/leds/ledtrig-pattern.txt
new file mode 100644
index 0000000..4b546c3
--- /dev/null
+++ b/Documentation/leds/ledtrig-pattern.txt
@@ -0,0 +1,60 @@
+LED Pattern Trigger
+===================
+
+0. Introduction
+
+LED Pattern trigger is designed to let LEDs indicate the patterns defined by
+users. This is very useful for those scenarios where only one non-color led
+needs to indicate different states.
+
+1. How to use
+
+Pattern trigger can be enabled and disabled from user space on led class
+devices that support this trigger as shown below:
+
+ echo pattern > trigger
+
+When the pattern trigger is activated, it will get the current brightness as
+its brightness if the led is on. Otherwise, it will use the maximum brightness.
+
+If the led supports different values rather than ON/OFF, the brightness can be
+set in advance before enabling the trigger.
+
+ echo 128 > brightness
+ echo pattern > trigger
+
+Two properties are exported. They are delay_unit and pattern.
+
+ delay_unit - a delay time unit, default value is 125 ms
+ pattern - blink pattern, includes three legal characters
+ '#', ' '(space), and '/'
+ '#' let LED on and last delay_unit long time
+ ' ' let LED off and last delay_unit long time
+ '/' stop pattern
+ pattern will be repeated without it
+
+3. Examples
+
+ Example 1
+
+ echo pattern > trigger
+ echo "# ## /"
+
+ The behaviour is like below:
+
+ on(125ms)off(125ms)on(250ms)off
+ This is Morse code 'A'
+
+ Example 2
+
+ echo pattern > trigger
+ echo 200 > delay_unit
+ echo "# # "
+
+ The behaviour is like below:
+
+ on(200ms)off(200ms)on(200ms)off(800ms)
+ on(200ms)off(200ms)on(200ms)off(800ms)
+ ...(Repeat)
+
+ This is 2 times burst blinking.
diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index 49794b4..23d0967 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -108,4 +108,13 @@ config LEDS_TRIGGER_CAMERA
This enables direct flash/torch on/off by the driver, kernel space.
If unsure, say Y.
+config LEDS_TRIGGER_PATTERN
+ tristate "LED Pattern Trigger"
+ depends on LEDS_TRIGGERS
+ help
+ This allows LEDs to blink in a user defined pattern controlled via
+ sysfs. It's useful to notify different states by using one led.
+ For more details read Documentation/leds/leds-pattern.txt.
+ If unsure, say Y.
+
endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
index 1abf48d..a739429 100644
--- a/drivers/leds/trigger/Makefile
+++ b/drivers/leds/trigger/Makefile
@@ -8,3 +8,4 @@ obj-$(CONFIG_LEDS_TRIGGER_CPU) += ledtrig-cpu.o
obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
obj-$(CONFIG_LEDS_TRIGGER_TRANSIENT) += ledtrig-transient.o
obj-$(CONFIG_LEDS_TRIGGER_CAMERA) += ledtrig-camera.o
+obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o
diff --git a/drivers/leds/trigger/ledtrig-pattern.c
b/drivers/leds/trigger/ledtrig-pattern.c
new file mode 100644
index 0000000..9c688e7
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-pattern.c
@@ -0,0 +1,233 @@
+/*
+ * LED Kernel Morse Code Trigger
+ *
+ * Copyright (C) 2013 Joe Xue <lg...@hotmail.com>
+ *
+ * Based on Richard Purdie's ledtrig-timer.c and Atsushi Nemoto's
+ * ledtrig-heartbeat.c and Shuah Khan's ledtrig-transient.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/device.h>
+#include <linux/slab.h>
+#include <linux/timer.h>
+#include <linux/leds.h>
+#include "../leds.h"
+
+struct pattern_trig_data {
+ unsigned long delay_unit;
+ unsigned long pattern_len;
+ unsigned long count;
+ int brightness_on;
+ char *pattern;
+ struct timer_list timer;
+ struct mutex pattern_mutex;
+};
+
+static void pattern_timer_function(unsigned long data)
+{
+ int repeat = 1;
+ struct led_classdev *led_cdev = (struct led_classdev *) data;
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+ char this = pattern_data->pattern[pattern_data->count];
+
+ if (this == '#') {
+ __led_set_brightness(led_cdev, pattern_data->brightness_on);
+ } else if (this == ' ') {
+ __led_set_brightness(led_cdev, LED_OFF);
+ /* stop blinking */
+ } else if (this == '/') {
+ return;
+ }
+
+ while (pattern_data->pattern[pattern_data->count + repeat] == this)
+ repeat++;
+
+ mod_timer(&pattern_data->timer,
+ jiffies + msecs_to_jiffies(pattern_data->delay_unit * repeat));
+
+ pattern_data->count += repeat;
+ if (pattern_data->count == pattern_data->pattern_len)
+ pattern_data->count = 0;
+}
+
+static ssize_t pattern_delay_unit_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+
+ return sprintf(buf, "%lu\n", pattern_data->delay_unit);
+}
+
+static ssize_t pattern_delay_unit_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+ unsigned long state;
+ ssize_t ret = -EINVAL;
+
+ ret = kstrtoul(buf, 10, &state);
+ if (ret)
+ return ret;
+
+ /* this value can't be 0 */
+ if (state == 0)
+ return -EINVAL;
+
+ pattern_data->delay_unit = state;
+
+ return size;
+}
+
+static ssize_t pattern_pattern_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+
+ if (pattern_data->pattern)
+ return scnprintf(buf, PAGE_SIZE, "%s\n",
+ pattern_data->pattern);
+ return 0;
+}
+
+static ssize_t pattern_pattern_store(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t size)
+{
+ struct led_classdev *led_cdev = dev_get_drvdata(dev);
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+ int i, len;
+ ssize_t ret = -EINVAL;
+
+ len = 0;
+
+ /* legality check */
+ for (i = 0; i < size; i++) {
+ if (buf[i] != ' ' && buf[i] != '#' && buf[i] != '/')
+ break;
+ len++;
+ }
+
+ if (len == 0)
+ return ret;
+
+ mutex_lock(&pattern_data->pattern_mutex);
+ kfree(pattern_data->pattern);
+ pattern_data->pattern = NULL;
+
+ pattern_data->pattern = kzalloc(len + 1, GFP_KERNEL);
+ if (!pattern_data->pattern) {
+ len = -ENOMEM;
+ goto unlock;
+ }
+ scnprintf(pattern_data->pattern, len + 1, "%s", buf);
+
+ del_timer_sync(&pattern_data->timer);
+
+ pattern_data->pattern_len = len;
+ pattern_data->count = 0;
+
+ mod_timer(&pattern_data->timer, jiffies + 1);
+unlock:
+ mutex_unlock(&pattern_data->pattern_mutex);
+ return size;
+}
+
+static DEVICE_ATTR(pattern, 0644, pattern_pattern_show, pattern_pattern_store);
+static DEVICE_ATTR(delay_unit, 0644,
+ pattern_delay_unit_show, pattern_delay_unit_store);
+
+static void pattern_trig_activate(struct led_classdev *led_cdev)
+{
+ int rc;
+ struct pattern_trig_data *tdata;
+
+ tdata = kzalloc(sizeof(struct pattern_trig_data), GFP_KERNEL);
+ if (!tdata) {
+ dev_err(led_cdev->dev,
+ "unable to allocate pattern trigger\n");
+ return;
+ }
+
+ led_cdev->trigger_data = tdata;
+
+ mutex_init(&tdata->pattern_mutex);
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_pattern);
+ if (rc)
+ goto err_out;
+
+ rc = device_create_file(led_cdev->dev, &dev_attr_delay_unit);
+ if (rc)
+ goto err_out_delay_unit;
+
+ /* default delay_unit 125ms */
+ tdata->delay_unit = 125;
+
+ setup_timer(&tdata->timer, pattern_timer_function,
+ (unsigned long) led_cdev);
+
+ tdata->brightness_on = led_get_brightness(led_cdev);
+ if (tdata->brightness_on == LED_OFF)
+ tdata->brightness_on = led_cdev->max_brightness;
+
+ __led_set_brightness(led_cdev, LED_OFF);
+ led_cdev->activated = true;
+
+ return;
+
+err_out_delay_unit:
+ device_remove_file(led_cdev->dev, &dev_attr_pattern);
+err_out:
+ dev_err(led_cdev->dev, "unable to register pattern trigger\n");
+ led_cdev->trigger_data = NULL;
+ kfree(tdata);
+}
+
+static void pattern_trig_deactivate(struct led_classdev *led_cdev)
+{
+ struct pattern_trig_data *pattern_data = led_cdev->trigger_data;
+
+ if (led_cdev->activated) {
+ del_timer_sync(&pattern_data->timer);
+ device_remove_file(led_cdev->dev, &dev_attr_pattern);
+ device_remove_file(led_cdev->dev, &dev_attr_delay_unit);
+ led_cdev->trigger_data = NULL;
+ led_cdev->activated = false;
+ kfree(pattern_data->pattern);
+ kfree(pattern_data);
+ }
+ __led_set_brightness(led_cdev, LED_OFF);
+}
+
+static struct led_trigger pattern_trigger = {
+ .name = "pattern",
+ .activate = pattern_trig_activate,
+ .deactivate = pattern_trig_deactivate,
+};
+
+static int __init pattern_trig_init(void)
+{
+ return led_trigger_register(&pattern_trigger);
+}
+
+static void __exit pattern_trig_exit(void)
+{
+ led_trigger_unregister(&pattern_trigger);
+}
+
+module_init(pattern_trig_init);
+module_exit(pattern_trig_exit);
+
+MODULE_AUTHOR("Joe Xue <lg...@hotmail.com");
+MODULE_DESCRIPTION("Pattern LED trigger");
+MODULE_LICENSE("GPL");
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
