From: Andy Fleming <aflem...@freescale.com>
Very incomplete, but will allow for binding an ethernet controller
to it.
Signed-off-by: Andy Fleming <aflem...@freescale.com>
Signed-off-by: Shaohui Xie <shaohui....@freescale.com>
---
v2: turn genphy_driver to an array, add generic 10g driver to it.
drivers/net/phy/phy_device.c | 96 ++++++++++++++++++++++++++++++++++++++++----
1 file changed, 89 insertions(+), 7 deletions(-)
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index d6447b3..96a5e03 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -32,6 +32,7 @@
#include <linux/module.h>
#include <linux/mii.h>
#include <linux/ethtool.h>
+#include <linux/mdio.h>
#include <linux/phy.h>
#include <asm/io.h>
@@ -53,7 +54,7 @@ static void phy_device_release(struct device *dev)
kfree(to_phy_device(dev));
}
-static struct phy_driver genphy_driver;
+static struct phy_driver genphy_driver[2];
extern int mdio_bus_init(void);
extern void mdio_bus_exit(void);
@@ -539,7 +540,7 @@ static int phy_attach_direct(struct net_device *dev, struct
phy_device *phydev,
return -ENODEV;
}
- d->driver = &genphy_driver.driver;
+ d->driver = &genphy_driver[0].driver;
err = d->driver->probe(d);
if (err >= 0)
@@ -620,7 +621,7 @@ void phy_detach(struct phy_device *phydev)
* was using the generic driver), we unbind the device
* from the generic driver so that there's a chance a
* real driver could be loaded */
- if (phydev->dev.driver == &genphy_driver.driver)
+ if (phydev->dev.driver == &genphy_driver[0].driver)
device_release_driver(&phydev->dev);
}
EXPORT_SYMBOL(phy_detach);
@@ -689,6 +690,12 @@ static int genphy_config_advert(struct phy_device *phydev)
return changed;
}
+int gen10g_config_advert(struct phy_device *dev)
+{
+ return 0;
+}
+EXPORT_SYMBOL(gen10g_config_advert);
+
/**
* genphy_setup_forced - configures/forces speed/duplex from @phydev
* @phydev: target phy_device struct
@@ -742,6 +749,11 @@ int genphy_restart_aneg(struct phy_device *phydev)
}
EXPORT_SYMBOL(genphy_restart_aneg);
+int gen10g_restart_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+EXPORT_SYMBOL(gen10g_restart_aneg);
/**
* genphy_config_aneg - restart auto-negotiation or write BMCR
@@ -784,6 +796,12 @@ int genphy_config_aneg(struct phy_device *phydev)
}
EXPORT_SYMBOL(genphy_config_aneg);
+int gen10g_config_aneg(struct phy_device *phydev)
+{
+ return 0;
+}
+EXPORT_SYMBOL(gen10g_config_aneg);
+
/**
* genphy_update_link - update link status in @phydev
* @phydev: target phy_device struct
@@ -913,6 +931,34 @@ int genphy_read_status(struct phy_device *phydev)
}
EXPORT_SYMBOL(genphy_read_status);
+int gen10g_read_status(struct phy_device *phydev)
+{
+ int devad, reg;
+ u32 mmd_mask = phydev->c45_ids.devices_in_package;
+
+ phydev->link = 1;
+
+ /* For now just lie and say it's 10G all the time */
+ phydev->speed = SPEED_10000;
+ phydev->duplex = DUPLEX_FULL;
+
+ for (devad = 0; mmd_mask; devad++, mmd_mask = mmd_mask >> 1) {
+ if (!(mmd_mask & 1))
+ continue;
+
+ /* Read twice because link state is latched and a
+ * read moves the current state into the register
+ */
+ phy_read_mmd(phydev, devad, MDIO_STAT1);
+ reg = phy_read_mmd(phydev, devad, MDIO_STAT1);
+ if (reg < 0 || !(reg & MDIO_STAT1_LSTATUS))
+ phydev->link = 0;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL(gen10g_read_status);
+
static int genphy_config_init(struct phy_device *phydev)
{
int val;
@@ -959,6 +1005,16 @@ static int genphy_config_init(struct phy_device *phydev)
return 0;
}
+
+static int gen10g_config_init(struct phy_device *phydev)
+{
+ /* Temporarily just say we support everything */
+ phydev->supported = SUPPORTED_10000baseT_Full;
+ phydev->advertising = SUPPORTED_10000baseT_Full;
+
+ return 0;
+}
+
int genphy_suspend(struct phy_device *phydev)
{
int value;
@@ -974,6 +1030,12 @@ int genphy_suspend(struct phy_device *phydev)
}
EXPORT_SYMBOL(genphy_suspend);
+int gen10g_suspend(struct phy_device *phydev)
+{
+ return 0;
+}
+EXPORT_SYMBOL(gen10g_suspend);
+
int genphy_resume(struct phy_device *phydev)
{
int value;
@@ -989,6 +1051,12 @@ int genphy_resume(struct phy_device *phydev)
}
EXPORT_SYMBOL(genphy_resume);
+int gen10g_resume(struct phy_device *phydev)
+{
+ return 0;
+}
+EXPORT_SYMBOL(gen10g_resume);
+
/**
* phy_probe - probe and init a PHY device
* @dev: device to probe and init
@@ -1116,7 +1184,8 @@ void phy_drivers_unregister(struct phy_driver *drv, int n)
}
EXPORT_SYMBOL(phy_drivers_unregister);
-static struct phy_driver genphy_driver = {
+static struct phy_driver genphy_driver[] = {
+{
.phy_id = 0xffffffff,
.phy_id_mask = 0xffffffff,
.name = "Generic PHY",
@@ -1127,7 +1196,18 @@ static struct phy_driver genphy_driver = {
.suspend = genphy_suspend,
.resume = genphy_resume,
.driver = {.owner= THIS_MODULE, },
-};
+}, {
+ .phy_id = 0xffffffff,
+ .phy_id_mask = 0xffffffff,
+ .name = "Generic 10G PHY",
+ .config_init = gen10g_config_init,
+ .features = 0,
+ .config_aneg = gen10g_config_aneg,
+ .read_status = gen10g_read_status,
+ .suspend = gen10g_suspend,
+ .resume = gen10g_resume,
+ .driver = {.owner = THIS_MODULE, },
+} };
static int __init phy_init(void)
{
@@ -1137,7 +1217,8 @@ static int __init phy_init(void)
if (rc)
return rc;
- rc = phy_driver_register(&genphy_driver);
+ rc = phy_drivers_register(genphy_driver,
+ ARRAY_SIZE(genphy_driver));
if (rc)
mdio_bus_exit();
@@ -1146,7 +1227,8 @@ static int __init phy_init(void)
static void __exit phy_exit(void)
{
- phy_driver_unregister(&genphy_driver);
+ phy_drivers_unregister(genphy_driver,
+ ARRAY_SIZE(genphy_driver));
mdio_bus_exit();
}
--
1.8.4.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
