On Mon, Nov 11, 2013 at 1:52 PM, Mark Trompell <m...@foresightlinux.org> wrote: > On Mon, Nov 11, 2013 at 12:07 PM, Veaceslav Falico <veaces...@falico.eu> > wrote: >> On Mon, Nov 11, 2013 at 11:29 AM, Mark Trompell <m...@foresightlinux.org> >> wrote: >>> my bridge br0 doesn't get an ip from dhcp anymore after 3.11.5 and 3.4.66, >>> What information would be helpful and required to find out what's going >>> wrong. >> >> CC netdev >> >> First thing would be to provide the network scheme. Do you use vlans? >> Which network >> cards/drivers are you using? Do you use some kind of virtualization? >> Is bonding involved? >> > Actually this is my desktop machine using kvm for a virtual machine > that uses eth0 which is connected to the bridge > which is used as interface for the host. > > $ ip addr > 2. eth0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc pfifo_fast > master br0 qlen 1000 > ... > 3. br0: <BROADCAST,MULTICAST,UP,10000> mtu 1500 qdisc noqueue > ... > > Anything else?
Okay more about my hardware and configuration: from lspci: 00:19.0 Ethernet controller: Intel Corporation 82579V Gigabit Network Connection (rev 04) /etc/sysconfig/network-scripts/ifcfg-br0 DEVICE=br0 ONBOOT=yes MACADDR=00:19:99:ac:b3:24 TYPE=Bridge BOOTPROTO=dhcp STP=on NM_CONTROLLED=no DELAY=0 /etc/sysconfig/network-scripts/ifcfg-eth0 DEVICE=eth0 HWADDR=00:19:99:cd:a5:e6 #BOOTPROTO=dhcp ONBOOT=yes BRIDGE=br0 TYPE=Ethernet NM_CONTROLLED=no > Greetings > Mark -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
