This patch changes the dtsi entry on omap4460 to contain the thermal data. This data will enable the passive cooling with CPUfreq cooling device at 100C and the system will do a thermal shutdown at 125C.
Cc: "Benoît Cousson" <[email protected]> Cc: Tony Lindgren <[email protected]> Cc: Rob Herring <[email protected]> Cc: Pawel Moll <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Stephen Warren <[email protected]> Cc: Ian Campbell <[email protected]> Cc: Russell King <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Eduardo Valentin <[email protected]> --- arch/arm/boot/dts/omap4460.dtsi | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/omap4460.dtsi b/arch/arm/boot/dts/omap4460.dtsi index c2f0f39..4d93aba 100644 --- a/arch/arm/boot/dts/omap4460.dtsi +++ b/arch/arm/boot/dts/omap4460.dtsi @@ -12,7 +12,7 @@ / { cpus { /* OMAP446x 'standard device' variants OPP50 to OPPTurbo */ - cpu@0 { + cpu0: cpu@0 { operating-points = < /* kHz uV */ 350000 1025000 @@ -30,12 +30,18 @@ ti,hwmods = "debugss"; }; - bandgap { + thermal-zones{ + #include "omap4-cpu-thermal.dtsi" + }; + + bandgap: bandgap { reg = <0x4a002260 0x4 0x4a00232C 0x4 0x4a002378 0x18>; compatible = "ti,omap4460-bandgap"; interrupts = <0 126 IRQ_TYPE_LEVEL_HIGH>; /* talert */ gpios = <&gpio3 22 0>; /* tshut */ + + #thermal-sensor-cells = <0>; }; }; -- 1.8.2.1.342.gfa7285d -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
