On Thursday 19 September 2013 23:29:22 Tony Lindgren wrote: > * Pali Rohár <pali.ro...@gmail.com> [130919 14:10]: > > On Thursday 19 September 2013 00:26:43 Tony Lindgren wrote: > > > * Pali Rohár <pali.ro...@gmail.com> [130918 15:02]: > > > > Without max_current data in board file lp5523 driver > > > > does not change current. > > > > > > Hmm is this a regression or are there other reasons to > > > merge this during the -rc cycle? > > > > I think this is regression, > > drivers/leds/leds-lp55xx-common.c code refuse to change > > led_current sysfs attribute if value is higher than > > max_current specified in board file. And because in board > > file max_current is not specified it is by default zero as > > global variable. So changing led_current is not possible > > because any positive value is more than zero. First I saw > > this behaviour in 3.10, but I forgot to send this patch. > > OK thanks, can you please update the patch description with > that so I can merge it for the -rc cycle? Ideally of course > with the breaking commit too. > > Regards, > > Tony
I do not know which commit broke it. There was some change in lp driver which
caused that driver not worked with testing applications. Now it should be fixed.
So I resending my patch with updated description.
RX-51: Add missing max_current to rx51_lp5523_led_config
File drivers/leds/leds-lp55xx-common.c refuse to change led_current sysfs
attribute if value is higher than max_current specified in board file. By
default
global C variables are zero, so changing always failed. This patch adding
missing
max_current and setting it to max value 255.
Signed-off-by: Pali Rohár <pali.ro...@gmail.com>
---
arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 9326890..d0f857c 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -180,38 +180,47 @@ static struct lp55xx_led_config rx51_lp5523_led_config[]
= {
.name = "lp5523:kb1",
.chan_nr = 0,
.led_current = 50,
+ .max_current = 255,
}, {
.name = "lp5523:kb2",
.chan_nr = 1,
.led_current = 50,
+ .max_current = 255,
}, {
.name = "lp5523:kb3",
.chan_nr = 2,
.led_current = 50,
+ .max_current = 255,
}, {
.name = "lp5523:kb4",
.chan_nr = 3,
.led_current = 50,
+ .max_current = 255,
}, {
.name = "lp5523:b",
.chan_nr = 4,
.led_current = 50,
+ .max_current = 255,
}, {
.name = "lp5523:g",
.chan_nr = 5,
.led_current = 50,
+ .max_current = 255,
}, {
.name = "lp5523:r",
.chan_nr = 6,
.led_current = 50,
+ .max_current = 255,
}, {
.name = "lp5523:kb5",
.chan_nr = 7,
.led_current = 50,
+ .max_current = 255,
}, {
.name = "lp5523:kb6",
.chan_nr = 8,
.led_current = 50,
+ .max_current = 255,
}
};
--
1.7.10.4
--
Pali Rohár
pali.ro...@gmail.com
signature.asc
Description: This is a digitally signed message part.
