* Pali Rohár <pali.ro...@gmail.com> [130918 15:02]:
> Without max_current data in board file lp5523 driver does not change current.
Hmm is this a regression or are there other reasons to merge
this during the -rc cycle?
Regards,
Tony
> Signed-off-by: Pali Rohár <pali.ro...@gmail.com>
> ---
> arch/arm/mach-omap2/board-rx51-peripherals.c | 9 +++++++++
> 1 file changed, 9 insertions(+)
>
> diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c
> b/arch/arm/mach-omap2/board-rx51-peripherals.c
> index 9326890..d0f857c 100644
> --- a/arch/arm/mach-omap2/board-rx51-peripherals.c
> +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
> @@ -180,38 +180,47 @@ static struct lp55xx_led_config
> rx51_lp5523_led_config[] = {
> .name = "lp5523:kb1",
> .chan_nr = 0,
> .led_current = 50,
> + .max_current = 255,
> }, {
> .name = "lp5523:kb2",
> .chan_nr = 1,
> .led_current = 50,
> + .max_current = 255,
> }, {
> .name = "lp5523:kb3",
> .chan_nr = 2,
> .led_current = 50,
> + .max_current = 255,
> }, {
> .name = "lp5523:kb4",
> .chan_nr = 3,
> .led_current = 50,
> + .max_current = 255,
> }, {
> .name = "lp5523:b",
> .chan_nr = 4,
> .led_current = 50,
> + .max_current = 255,
> }, {
> .name = "lp5523:g",
> .chan_nr = 5,
> .led_current = 50,
> + .max_current = 255,
> }, {
> .name = "lp5523:r",
> .chan_nr = 6,
> .led_current = 50,
> + .max_current = 255,
> }, {
> .name = "lp5523:kb5",
> .chan_nr = 7,
> .led_current = 50,
> + .max_current = 255,
> }, {
> .name = "lp5523:kb6",
> .chan_nr = 8,
> .led_current = 50,
> + .max_current = 255,
> }
> };
>
> --
> 1.7.10.4
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
