Hi Lee,
>> On 09/10/13 13:49, Lee Jones wrote:
>>> The LSM303DLH's WAI (WhoAmI) is 0x33, meaning it should be enabled by
>>> Accel Sensor group one. For the device to probe without error, we'll
>>> need to ensure it's registered with the correct WAI.
>>>
>>> Signed-off-by: Lee Jones <lee.jo...@linaro.org>
>> You clearly have a better datasheet than I have as for that part it doesn't
>> even claim to
>> have the relevant register to read a who am I from.
>>
>> Now that datasheet does list odr values as 50, 100, 400 1000 which would put
>> it where it originally
>> was in these tables.
>>
>> http://www.st.com/web/en/resource/technical/document/datasheet/CD00260288.pdf
>>
>> I haven't checked other elements...
>>
>> I'm confused but suspect we may need another type entry to deal with this
>> one.
> Hmmm... on initial thought, I don't know how we can handle this one. I
> assumed the WAIs were a one-stop-shop for device identification. I also
> thought that they would only match if the functionality and register
> maps would be the same.
>
> I'll touch base with Denis on this, perhaps he can shed some light.
>
I've just checked, the WAI is 0x32. It was correct...Are you sure that
you use the LSM303DLH?
Denis
>>> ---
>>> drivers/iio/accel/st_accel_core.c | 4 ++--
>>> 1 file changed, 2 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/iio/accel/st_accel_core.c
>>> b/drivers/iio/accel/st_accel_core.c
>>> index ea62291..03a2b6b 100644
>>> --- a/drivers/iio/accel/st_accel_core.c
>>> +++ b/drivers/iio/accel/st_accel_core.c
>>> @@ -170,6 +170,7 @@ static const struct st_sensors st_accel_sensors[] = {
>>> [2] = LSM330D_ACCEL_DEV_NAME,
>>> [3] = LSM330DL_ACCEL_DEV_NAME,
>>> [4] = LSM330DLC_ACCEL_DEV_NAME,
>>> + [5] = LSM303DLH_ACCEL_DEV_NAME,
>>> },
>>> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
>>> .odr = {
>>> @@ -238,8 +239,7 @@ static const struct st_sensors st_accel_sensors[] = {
>>> .sensors_supported = {
>>> [0] = LIS331DLH_ACCEL_DEV_NAME,
>>> [1] = LSM303DL_ACCEL_DEV_NAME,
>>> - [2] = LSM303DLH_ACCEL_DEV_NAME,
>>> - [3] = LSM303DLM_ACCEL_DEV_NAME,
>>> + [2] = LSM303DLM_ACCEL_DEV_NAME,
>>> },
>>> .ch = (struct iio_chan_spec *)st_accel_12bit_channels,
>>> .odr = {
>>>
