- driver: remove use of nvidia,dma-request-selector
use dma_request_slave_channel to request channel
- if dmas/dma-names are missing, it still supports cpu based transfer
- update binding doc and specify dmas/dma-names properties as optional
Signed-off-by: Richard Zhao <riz...@nvidia.com>
---
.../devicetree/bindings/spi/nvidia,tegra114-spi.txt | 10 +++++++---
drivers/spi/spi-tegra114.c | 16 +++++-----------
2 files changed, 12 insertions(+), 14 deletions(-)
diff --git a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
index 91ff771..92e1a9a 100644
--- a/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
+++ b/Documentation/devicetree/bindings/spi/nvidia,tegra114-spi.txt
@@ -4,11 +4,14 @@ Required properties:
- compatible : should be "nvidia,tegra114-spi".
- reg: Should contain SPI registers location and length.
- interrupts: Should contain SPI interrupts.
-- nvidia,dma-request-selector : The Tegra DMA controller's phandle and
- request selector for this SPI controller.
- This is also require clock named "spi" as per binding document
Documentation/devicetree/bindings/clock/clock-bindings.txt
+Optional properties:
+- dmas : The Tegra DMA controller's phandle and request selector for
+ this SPI controller.
+- dma-names : Should be "rx-tx".
+
Recommended properties:
- spi-max-frequency: Definition as per
Documentation/devicetree/bindings/spi/spi-bus.txt
@@ -18,7 +21,8 @@ spi@7000d600 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000d600 0x200>;
interrupts = <0 82 0x04>;
- nvidia,dma-request-selector = <&apbdma 16>;
+ dmas = <&apbdma 16>;
+ dma-names = "rx-tx";
spi-max-frequency = <25000000>;
#address-cells = <1>;
#size-cells = <0>;
diff --git a/drivers/spi/spi-tegra114.c b/drivers/spi/spi-tegra114.c
index e8f542a..baff559 100644
--- a/drivers/spi/spi-tegra114.c
+++ b/drivers/spi/spi-tegra114.c
@@ -177,7 +177,7 @@ struct tegra_spi_data {
void __iomem *base;
phys_addr_t phys;
unsigned irq;
- int dma_req_sel;
+ bool use_dma;
u32 spi_max_frequency;
u32 cur_speed;
@@ -599,11 +599,8 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data
*tspi,
dma_addr_t dma_phys;
int ret;
struct dma_slave_config dma_sconfig;
- dma_cap_mask_t mask;
- dma_cap_zero(mask);
- dma_cap_set(DMA_SLAVE, mask);
- dma_chan = dma_request_channel(mask, NULL, NULL);
+ dma_chan = dma_request_slave_channel(tspi->dev, "rx-tx");
if (!dma_chan) {
dev_err(tspi->dev,
"Dma channel is not available, will try later\n");
@@ -618,7 +615,6 @@ static int tegra_spi_init_dma_param(struct tegra_spi_data
*tspi,
return -ENOMEM;
}
- dma_sconfig.slave_id = tspi->dma_req_sel;
if (dma_to_memory) {
dma_sconfig.src_addr = tspi->phys + SPI_RX_FIFO;
dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
@@ -1012,11 +1008,9 @@ static void tegra_spi_parse_dt(struct platform_device
*pdev,
struct tegra_spi_data *tspi)
{
struct device_node *np = pdev->dev.of_node;
- u32 of_dma[2];
- if (of_property_read_u32_array(np, "nvidia,dma-request-selector",
- of_dma, 2) >= 0)
- tspi->dma_req_sel = of_dma[1];
+ if (of_find_property(np, "dmas", NULL))
+ tspi->use_dma = true;
if (of_property_read_u32(np, "spi-max-frequency",
&tspi->spi_max_frequency))
@@ -1093,7 +1087,7 @@ static int tegra_spi_probe(struct platform_device *pdev)
tspi->max_buf_size = SPI_FIFO_DEPTH << 2;
tspi->dma_buf_size = DEFAULT_SPI_DMA_BUF_LEN;
- if (tspi->dma_req_sel) {
+ if (tspi->use_dma) {
ret = tegra_spi_init_dma_param(tspi, true);
if (ret < 0) {
dev_err(&pdev->dev, "RxDma Init failed, err %d\n", ret);
--
1.8.1.5
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
