Hi Roger,
* Roger Quadros <rog...@ti.com> [130524 06:12]:
> Fix memory leaks in the error path.
> Also, use platform_device_register_full() to allocate
> the platform devices and set platform data.
If you need this for the v3.10-rc, you should describe why this patch
is needed and ideally have some oops or regression causing commit
listed. Care to update the description for that?
Regards,
Tony
> Signed-off-by: Roger Quadros <rog...@ti.com>
> ---
> arch/arm/mach-omap2/usb-host.c | 106
> +++++++++++++++++++++-------------------
> 1 files changed, 56 insertions(+), 50 deletions(-)
>
> diff --git a/arch/arm/mach-omap2/usb-host.c b/arch/arm/mach-omap2/usb-host.c
> index aa27d7f..609b330 100644
> --- a/arch/arm/mach-omap2/usb-host.c
> +++ b/arch/arm/mach-omap2/usb-host.c
> @@ -28,6 +28,7 @@
> #include <linux/io.h>
> #include <linux/gpio.h>
> #include <linux/usb/phy.h>
> +#include <linux/usb/nop-usb-xceiv.h>
>
> #include "soc.h"
> #include "omap_device.h"
> @@ -560,7 +561,8 @@ static int usbhs_add_regulator(char *name, char *dev_id,
> char *dev_supply,
> struct regulator_init_data *reg_data;
> struct fixed_voltage_config *config;
> struct platform_device *pdev;
> - int ret;
> + struct platform_device_info pdevinfo;
> + int ret = -ENOMEM;
>
> supplies = kzalloc(sizeof(*supplies), GFP_KERNEL);
> if (!supplies)
> @@ -571,7 +573,7 @@ static int usbhs_add_regulator(char *name, char *dev_id,
> char *dev_supply,
>
> reg_data = kzalloc(sizeof(*reg_data), GFP_KERNEL);
> if (!reg_data)
> - return -ENOMEM;
> + goto err_data;
>
> reg_data->constraints.valid_ops_mask = REGULATOR_CHANGE_STATUS;
> reg_data->consumer_supplies = supplies;
> @@ -580,39 +582,53 @@ static int usbhs_add_regulator(char *name, char
> *dev_id, char *dev_supply,
> config = kmemdup(&hsusb_reg_config, sizeof(hsusb_reg_config),
> GFP_KERNEL);
> if (!config)
> - return -ENOMEM;
> + goto err_config;
> +
> + config->supply_name = kstrdup(name, GFP_KERNEL);
> + if (!config->supply_name)
> + goto err_supplyname;
>
> - config->supply_name = name;
> config->gpio = gpio;
> config->enable_high = polarity;
> config->init_data = reg_data;
>
> /* create a regulator device */
> - pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
> - if (!pdev)
> - return -ENOMEM;
> + memset(&pdevinfo, 0, sizeof(pdevinfo));
> + pdevinfo.name = reg_name;
> + pdevinfo.id = PLATFORM_DEVID_AUTO;
> + pdevinfo.data = config;
> + pdevinfo.size_data = sizeof(*config);
>
> - pdev->id = PLATFORM_DEVID_AUTO;
> - pdev->name = reg_name;
> - pdev->dev.platform_data = config;
> + pdev = platform_device_register_full(&pdevinfo);
> + if (IS_ERR(pdev)) {
> + ret = PTR_ERR(pdev);
> + pr_err("%s: Failed registering regulator %s for %s : %d\n",
> + __func__, name, dev_id, ret);
> + goto err_register;
> + }
>
> - ret = platform_device_register(pdev);
> - if (ret)
> - pr_err("%s: Failed registering regulator %s for %s\n",
> - __func__, name, dev_id);
> + return 0;
>
> +err_register:
> + kfree(config->supply_name);
> +err_supplyname:
> + kfree(config);
> +err_config:
> + kfree(reg_data);
> +err_data:
> + kfree(supplies);
> return ret;
> }
>
> +#define MAX_STR 20
> +
> int usbhs_init_phys(struct usbhs_phy_data *phy, int num_phys)
> {
> - char *rail_name;
> - int i, len;
> + char rail_name[MAX_STR];
> + int i;
> struct platform_device *pdev;
> char *phy_id;
> -
> - /* the phy_id will be something like "nop_usb_xceiv.1" */
> - len = strlen(nop_name) + 3; /* 3 -> ".1" and NULL terminator */
> + struct platform_device_info pdevinfo;
>
> for (i = 0; i < num_phys; i++) {
>
> @@ -627,25 +643,26 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int
> num_phys)
> !gpio_is_valid(phy->vcc_gpio))
> continue;
>
> - /* create a NOP PHY device */
> - pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
> - if (!pdev)
> - return -ENOMEM;
> -
> - pdev->id = phy->port;
> - pdev->name = nop_name;
> - pdev->dev.platform_data = phy->platform_data;
> -
> - phy_id = kmalloc(len, GFP_KERNEL);
> - if (!phy_id)
> + phy_id = kmalloc(MAX_STR, GFP_KERNEL);
> + if (!phy_id) {
> + pr_err("%s: kmalloc() failed\n", __func__);
> return -ENOMEM;
> + }
>
> - scnprintf(phy_id, len, "nop_usb_xceiv.%d\n",
> - pdev->id);
> -
> - if (platform_device_register(pdev)) {
> - pr_err("%s: Failed to register device %s\n",
> - __func__, phy_id);
> + /* create a NOP PHY device */
> + memset(&pdevinfo, 0, sizeof(pdevinfo));
> + pdevinfo.name = nop_name;
> + pdevinfo.id = phy->port;
> + pdevinfo.data = phy->platform_data;
> + pdevinfo.size_data = sizeof(struct nop_usb_xceiv_platform_data);
> +
> + scnprintf(phy_id, MAX_STR, "nop_usb_xceiv.%d",
> + phy->port);
> + pdev = platform_device_register_full(&pdevinfo);
> + if (IS_ERR(pdev)) {
> + pr_err("%s: Failed to register device %s : %ld\n",
> + __func__, phy_id, PTR_ERR(pdev));
> + kfree(phy_id);
> continue;
> }
>
> @@ -653,26 +670,15 @@ int usbhs_init_phys(struct usbhs_phy_data *phy, int
> num_phys)
>
> /* Do we need RESET regulator ? */
> if (gpio_is_valid(phy->reset_gpio)) {
> -
> - rail_name = kmalloc(13, GFP_KERNEL);
> - if (!rail_name)
> - return -ENOMEM;
> -
> - scnprintf(rail_name, 13, "hsusb%d_reset", phy->port);
> -
> + scnprintf(rail_name, MAX_STR,
> + "hsusb%d_reset", phy->port);
> usbhs_add_regulator(rail_name, phy_id, "reset",
> phy->reset_gpio, 1);
> }
>
> /* Do we need VCC regulator ? */
> if (gpio_is_valid(phy->vcc_gpio)) {
> -
> - rail_name = kmalloc(13, GFP_KERNEL);
> - if (!rail_name)
> - return -ENOMEM;
> -
> - scnprintf(rail_name, 13, "hsusb%d_vcc", phy->port);
> -
> + scnprintf(rail_name, MAX_STR, "hsusb%d_vcc", phy->port);
> usbhs_add_regulator(rail_name, phy_id, "vcc",
> phy->vcc_gpio, phy->vcc_polarity);
> }
> --
> 1.7.4.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
