Make format and arguments match.
Signed-off-by: Joe Perches <j...@perches.com>
---
drivers/scsi/BusLogic.c | 50 ++++++++++++++++++++++++-------------------------
drivers/scsi/BusLogic.h | 1 +
2 files changed, 26 insertions(+), 25 deletions(-)
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index feab3a5..28c2051 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -720,23 +720,23 @@ static int __init blogic_init_mm_probeinfo(struct
blogic_adapter *adapter)
pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
- blogic_err("BusLogic: Base Address0 0x%X not I/O for "
"MultiMaster Host Adapter\n", NULL, base_addr0);
- blogic_err("at PCI Bus %d Device %d I/O Address
0x%X\n", NULL, bus, device, io_addr);
+ blogic_err("BusLogic: Base Address0 0x%lX not I/O for "
"MultiMaster Host Adapter\n", NULL, base_addr0);
+ blogic_err("at PCI Bus %d Device %d I/O Address
0x%lX\n", NULL, bus, device, io_addr);
continue;
}
if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
- blogic_err("BusLogic: Base Address1 0x%X not Memory for
" "MultiMaster Host Adapter\n", NULL, base_addr1);
- blogic_err("at PCI Bus %d Device %d PCI Address
0x%X\n", NULL, bus, device, pci_addr);
+ blogic_err("BusLogic: Base Address1 0x%lX not Memory
for " "MultiMaster Host Adapter\n", NULL, base_addr1);
+ blogic_err("at PCI Bus %d Device %d PCI Address
0x%lX\n", NULL, bus, device, pci_addr);
continue;
}
if (irq_ch == 0) {
blogic_err("BusLogic: IRQ Channel %d invalid for "
"MultiMaster Host Adapter\n", NULL, irq_ch);
- blogic_err("at PCI Bus %d Device %d I/O Address
0x%X\n", NULL, bus, device, io_addr);
+ blogic_err("at PCI Bus %d Device %d I/O Address
0x%lX\n", NULL, bus, device, io_addr);
continue;
}
if (blogic_global_options.trace_probe) {
blogic_notice("BusLogic: PCI MultiMaster Host Adapter "
"detected at\n", NULL);
- blogic_notice("BusLogic: PCI Bus %d Device %d I/O
Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr);
+ blogic_notice("BusLogic: PCI Bus %d Device %d I/O
Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
}
/*
Issue the Inquire PCI Host Adapter Information command to
determine
@@ -960,23 +960,23 @@ static int __init blogic_init_fp_probeinfo(struct
blogic_adapter *adapter)
pci_addr = base_addr1 = pci_resource_start(pci_device, 1);
#ifdef CONFIG_SCSI_FLASHPOINT
if (pci_resource_flags(pci_device, 0) & IORESOURCE_MEM) {
- blogic_err("BusLogic: Base Address0 0x%X not I/O for "
"FlashPoint Host Adapter\n", NULL, base_addr0);
- blogic_err("at PCI Bus %d Device %d I/O Address
0x%X\n", NULL, bus, device, io_addr);
+ blogic_err("BusLogic: Base Address0 0x%lX not I/O for "
"FlashPoint Host Adapter\n", NULL, base_addr0);
+ blogic_err("at PCI Bus %d Device %d I/O Address
0x%lX\n", NULL, bus, device, io_addr);
continue;
}
if (pci_resource_flags(pci_device, 1) & IORESOURCE_IO) {
- blogic_err("BusLogic: Base Address1 0x%X not Memory for
" "FlashPoint Host Adapter\n", NULL, base_addr1);
- blogic_err("at PCI Bus %d Device %d PCI Address
0x%X\n", NULL, bus, device, pci_addr);
+ blogic_err("BusLogic: Base Address1 0x%lX not Memory
for " "FlashPoint Host Adapter\n", NULL, base_addr1);
+ blogic_err("at PCI Bus %d Device %d PCI Address
0x%lX\n", NULL, bus, device, pci_addr);
continue;
}
if (irq_ch == 0) {
blogic_err("BusLogic: IRQ Channel %d invalid for "
"FlashPoint Host Adapter\n", NULL, irq_ch);
- blogic_err("at PCI Bus %d Device %d I/O Address
0x%X\n", NULL, bus, device, io_addr);
+ blogic_err("at PCI Bus %d Device %d I/O Address
0x%lX\n", NULL, bus, device, io_addr);
continue;
}
if (blogic_global_options.trace_probe) {
blogic_notice("BusLogic: FlashPoint Host Adapter "
"detected at\n", NULL);
- blogic_notice("BusLogic: PCI Bus %d Device %d I/O
Address " "0x%X PCI Address 0x%X\n", NULL, bus, device, io_addr, pci_addr);
+ blogic_notice("BusLogic: PCI Bus %d Device %d I/O
Address 0x%lX PCI Address 0x%lX\n", NULL, bus, device, io_addr, pci_addr);
}
if (blogic_probeinfo_count < BLOGIC_MAX_ADAPTERS) {
struct blogic_probeinfo *probeinfo =
@@ -1103,9 +1103,9 @@ static bool blogic_failure(struct blogic_adapter
*adapter, char *msg)
if (adapter->adapter_bus_type == BLOGIC_PCI_BUS) {
blogic_err("While configuring BusLogic PCI Host Adapter at\n",
adapter);
- blogic_err("Bus %d Device %d I/O Address 0x%X PCI Address
0x%X:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr,
adapter->pci_addr);
+ blogic_err("Bus %d Device %d I/O Address 0x%lX PCI Address
0x%lX:\n", adapter, adapter->bus, adapter->dev, adapter->io_addr,
adapter->pci_addr);
} else
- blogic_err("While configuring BusLogic Host Adapter at " "I/O
Address 0x%X:\n", adapter, adapter->io_addr);
+ blogic_err("While configuring BusLogic Host Adapter at I/O
Address 0x%lX:\n", adapter, adapter->io_addr);
blogic_err("%s FAILED - DETACHING\n", adapter, msg);
if (blogic_cmd_failure_reason != NULL)
blogic_err("ADDITIONAL FAILURE INFO - %s\n", adapter,
@@ -1133,13 +1133,13 @@ static bool __init blogic_probe(struct blogic_adapter
*adapter)
fpinfo->present = false;
if (!(FlashPoint_ProbeHostAdapter(fpinfo) == 0 &&
fpinfo->present)) {
- blogic_err("BusLogic: FlashPoint Host Adapter detected
at " "PCI Bus %d Device %d\n", adapter, adapter->bus, adapter->dev);
- blogic_err("BusLogic: I/O Address 0x%X PCI Address
0x%X, " "but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr);
+ blogic_err("BusLogic: FlashPoint Host Adapter detected
at PCI Bus %d Device %d\n", adapter, adapter->bus, adapter->dev);
+ blogic_err("BusLogic: I/O Address 0x%lX PCI Address
0x%lX, but FlashPoint\n", adapter, adapter->io_addr, adapter->pci_addr);
blogic_err("BusLogic: Probe Function failed to validate
it.\n", adapter);
return false;
}
if (blogic_global_options.trace_probe)
- blogic_notice("BusLogic_Probe(0x%X): FlashPoint
Found\n", adapter, adapter->io_addr);
+ blogic_notice("BusLogic_Probe(0x%lX): FlashPoint
Found\n", adapter, adapter->io_addr);
/*
Indicate the Host Adapter Probe completed successfully.
*/
@@ -1156,7 +1156,7 @@ static bool __init blogic_probe(struct blogic_adapter
*adapter)
intreg.all = blogic_rdint(adapter);
georeg.all = blogic_rdgeom(adapter);
if (blogic_global_options.trace_probe)
- blogic_notice("BusLogic_Probe(0x%X): Status 0x%02X, Interrupt
0x%02X, " "Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all,
intreg.all, georeg.all);
+ blogic_notice("BusLogic_Probe(0x%lX): Status 0x%02X, Interrupt
0x%02X, Geometry 0x%02X\n", adapter, adapter->io_addr, statusreg.all,
intreg.all, georeg.all);
if (statusreg.all == 0 || statusreg.sr.diag_active ||
statusreg.sr.cmd_param_busy || statusreg.sr.rsvd ||
statusreg.sr.cmd_invalid || intreg.ir.rsvd != 0)
@@ -1235,7 +1235,7 @@ static bool blogic_hwreset(struct blogic_adapter
*adapter, bool hard_reset)
udelay(100);
}
if (blogic_global_options.trace_hw_reset)
- blogic_notice("BusLogic_HardwareReset(0x%X): Diagnostic Active,
" "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
+ blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic
Active, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
if (timeout < 0)
return false;
/*
@@ -1255,7 +1255,7 @@ static bool blogic_hwreset(struct blogic_adapter
*adapter, bool hard_reset)
udelay(100);
}
if (blogic_global_options.trace_hw_reset)
- blogic_notice("BusLogic_HardwareReset(0x%X): Diagnostic
Completed, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
+ blogic_notice("BusLogic_HardwareReset(0x%lX): Diagnostic
Completed, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
if (timeout < 0)
return false;
/*
@@ -1271,7 +1271,7 @@ static bool blogic_hwreset(struct blogic_adapter
*adapter, bool hard_reset)
udelay(100);
}
if (blogic_global_options.trace_hw_reset)
- blogic_notice("BusLogic_HardwareReset(0x%X): Host Adapter
Ready, " "Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
+ blogic_notice("BusLogic_HardwareReset(0x%lX): Host Adapter
Ready, Status 0x%02X\n", adapter, adapter->io_addr, statusreg.all);
if (timeout < 0)
return false;
/*
@@ -1327,7 +1327,7 @@ static bool __init blogic_checkadapter(struct
blogic_adapter *adapter)
Provide tracing information if requested and return.
*/
if (blogic_global_options.trace_probe)
- blogic_notice("BusLogic_Check(0x%X): MultiMaster %s\n", adapter,
+ blogic_notice("BusLogic_Check(0x%lX): MultiMaster %s\n",
adapter,
adapter->io_addr,
(result ? "Found" : "Not Found"));
return result;
@@ -1840,7 +1840,7 @@ static bool __init blogic_reportconfig(struct
blogic_adapter *adapter)
int tgt_id;
blogic_info("Configuring BusLogic Model %s %s%s%s%s SCSI Host
Adapter\n", adapter, adapter->model,
blogic_adapter_busnames[adapter->adapter_bus_type], (adapter->wide ? " Wide" :
""), (adapter->differential ? " Differential" : ""), (adapter->ultra ? " Ultra"
: ""));
- blogic_info(" Firmware Version: %s, I/O Address: 0x%X, " "IRQ Channel:
%d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch,
(adapter->level_int ? "Level" : "Edge"));
+ blogic_info(" Firmware Version: %s, I/O Address: 0x%lX, IRQ Channel:
%d/%s\n", adapter, adapter->fw_ver, adapter->io_addr, adapter->irq_ch,
(adapter->level_int ? "Level" : "Edge"));
if (adapter->adapter_bus_type != BLOGIC_PCI_BUS) {
blogic_info(" DMA Channel: ", adapter);
if (adapter->dma_ch > 0)
@@ -1856,7 +1856,7 @@ static bool __init blogic_reportconfig(struct
blogic_adapter *adapter)
blogic_info(" PCI Bus: %d, Device: %d, Address: ", adapter,
adapter->bus, adapter->dev);
if (adapter->pci_addr > 0)
- blogic_info("0x%X, ", adapter, adapter->pci_addr);
+ blogic_info("0x%lX, ", adapter, adapter->pci_addr);
else
blogic_info("Unassigned, ", adapter);
}
@@ -3675,7 +3675,7 @@ static int __init blogic_parseopts(char *options)
blogic_probe_options.probe134 = true;
break;
default:
- blogic_err("BusLogic: Invalid Driver
Options " "(invalid I/O Address 0x%X)\n", NULL, io_addr);
+ blogic_err("BusLogic: Invalid Driver
Options (invalid I/O Address 0x%lX)\n", NULL, io_addr);
return 0;
}
} else if (blogic_parse(&options, "NoProbeISA"))
diff --git a/drivers/scsi/BusLogic.h b/drivers/scsi/BusLogic.h
index b53ec2f..d06e902 100644
--- a/drivers/scsi/BusLogic.h
+++ b/drivers/scsi/BusLogic.h
@@ -1296,6 +1296,7 @@ static int blogic_slaveconfig(struct scsi_device *);
static void blogic_qcompleted_ccb(struct blogic_ccb *);
static irqreturn_t blogic_inthandler(int, void *);
static int blogic_resetadapter(struct blogic_adapter *, bool hard_reset);
+__printf(2, 4)
static void blogic_msg(enum blogic_msglevel, char *, struct blogic_adapter *,
...);
static int __init blogic_setup(char *);
--
1.8.1.2.459.gbcd45b4.dirty
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
