Hi, These are some others fixes for various small issues I found while testing the ux500 ASoC driver on -next.
Patch 1 adds some missing declarations for AD controls that were causing some weird behaviour in alsamixer, as the default state was outside the declared range. Patch 2 fixes a kernel crash when opening and closing the audio device without sending any data. Patch 3 drops pinctrl code altogether from the driver. The actual implementation is buggy as the pins are only registered to the playback interfaces, which gives a bunch of warnings during kernel startup and also kills the capture interface by setting the shared pins to hi-z mode even if that's still active. As putting those pins in high-z is not really needed and was removed from the internal STE driver anyway, I'm just dropping that code form here as well. In parallel, I'm sending a pinctrl patch to declare those pin as a hog. Patches 4 to 6 fixes some weirdness with time slot usage. After this series the driver seems to work fine for both capture and playback interface (tested on a snowball v11). Thanks, Fabio Fabio Baltieri (6): ASoC: ab8500-codec: Add missing ad_to_slot definitions ASoC: ux500: Do not clear state if already idle ASoC: ux500: Drop pinctrl sleep support ASoC: ux500: Update tx tdm slots configuration ASoC: ux500: Swap even/odd AD slot definitions ASoC: ux500: Use the first two AD slots for capture sound/soc/codecs/ab8500-codec.c | 39 +++++++++++++++------------ sound/soc/codecs/ab8500-codec.h | 36 ++++++++++++------------- sound/soc/ux500/mop500_ab8500.c | 4 +-- sound/soc/ux500/ux500_msp_i2s.c | 58 +++-------------------------------------- sound/soc/ux500/ux500_msp_i2s.h | 6 ----- 5 files changed, 46 insertions(+), 97 deletions(-) -- 1.8.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
