- Replace the current settings with rtl_writephy and rtl_readphy.
For the hardware, the settings are same with previous ones. This
make the setting method like the previous chips.
- Add new PHY settings.
Signed-off-by: Hayes Wang <hayesw...@realtek.com>
---
drivers/net/ethernet/realtek/r8169.c | 72 +++++++++++++++++++++++++-----------
1 file changed, 51 insertions(+), 21 deletions(-)
diff --git a/drivers/net/ethernet/realtek/r8169.c
b/drivers/net/ethernet/realtek/r8169.c
index e811ab5..d1bee4c 100644
--- a/drivers/net/ethernet/realtek/r8169.c
+++ b/drivers/net/ethernet/realtek/r8169.c
@@ -1029,14 +1029,6 @@ static u16 r8168_phy_ocp_read(struct rtl8169_private
*tp, u32 reg)
(RTL_R32(GPHY_OCP) & 0xffff) : ~0;
}
-static void rtl_w1w0_phy_ocp(struct rtl8169_private *tp, int reg, int p, int m)
-{
- int val;
-
- val = r8168_phy_ocp_read(tp, reg);
- r8168_phy_ocp_write(tp, reg, (val | p) & ~m);
-}
-
static void r8168_mac_ocp_write(struct rtl8169_private *tp, u32 reg, u32 data)
{
void __iomem *ioaddr = tp->mmio_addr;
@@ -3410,23 +3402,61 @@ static void rtl8168g_1_hw_phy_config(struct
rtl8169_private *tp)
{
rtl_apply_firmware(tp);
- if (r8168_phy_ocp_read(tp, 0xa460) & 0x0100)
- rtl_w1w0_phy_ocp(tp, 0xbcc4, 0x0000, 0x8000);
- else
- rtl_w1w0_phy_ocp(tp, 0xbcc4, 0x8000, 0x0000);
+ rtl_writephy(tp, 0x1f, 0x0a46);
+ if (rtl_readphy(tp, 0x10) & 0x0100) {
+ rtl_writephy(tp, 0x1f, 0x0bcc);
+ rtl_w1w0_phy(tp, 0x12, 0x0000, 0x8000);
+ } else {
+ rtl_writephy(tp, 0x1f, 0x0bcc);
+ rtl_w1w0_phy(tp, 0x12, 0x8000, 0x0000);
+ }
- if (r8168_phy_ocp_read(tp, 0xa466) & 0x0100)
- rtl_w1w0_phy_ocp(tp, 0xc41a, 0x0002, 0x0000);
- else
- rtl_w1w0_phy_ocp(tp, 0xbcc4, 0x0000, 0x0002);
+ rtl_writephy(tp, 0x1f, 0x0a46);
+ if (rtl_readphy(tp, 0x13) & 0x0100) {
+ rtl_writephy(tp, 0x1f, 0x0c41);
+ rtl_w1w0_phy(tp, 0x15, 0x0002, 0x0000);
+ } else {
+ rtl_writephy(tp, 0x1f, 0x0c41);
+ rtl_w1w0_phy(tp, 0x15, 0x0000, 0x0002);
+ }
- rtl_w1w0_phy_ocp(tp, 0xa442, 0x000c, 0x0000);
- rtl_w1w0_phy_ocp(tp, 0xa4b2, 0x0004, 0x0000);
+ /* Enable PHY auto speed down */
+ rtl_writephy(tp, 0x1f, 0x0a44);
+ rtl_w1w0_phy(tp, 0x11, 0x000c, 0x0000);
+
+ rtl_writephy(tp, 0x1f, 0x0bcc);
+ rtl_w1w0_phy(tp, 0x14, 0x0100, 0x0000);
+ rtl_writephy(tp, 0x1f, 0x0a44);
+ rtl_w1w0_phy(tp, 0x11, 0x00c0, 0x0000);
+ rtl_writephy(tp, 0x1f, 0x0a43);
+ rtl_writephy(tp, 0x13, 0x8084);
+ rtl_w1w0_phy(tp, 0x14, 0x0000, 0x6000);
+ rtl_w1w0_phy(tp, 0x10, 0x1003, 0x0000);
+
+ /* EEE auto-fallback function */
+ rtl_writephy(tp, 0x1f, 0x0a4b);
+ rtl_w1w0_phy(tp, 0x11, 0x0004, 0x0000);
+
+ /* Enable UC LPF tune function */
+ rtl_writephy(tp, 0x1f, 0x0a43);
+ rtl_writephy(tp, 0x13, 0x8012);
+ rtl_w1w0_phy(tp, 0x14, 0x8000, 0x0000);
+
+ rtl_writephy(tp, 0x1f, 0x0c42);
+ rtl_w1w0_phy(tp, 0x11, 0x4000, 0x2000);
- r8168_phy_ocp_write(tp, 0xa436, 0x8012);
- rtl_w1w0_phy_ocp(tp, 0xa438, 0x8000, 0x0000);
+ /* Improve SWR Efficiency */
+ rtl_writephy(tp, 0x1f, 0x0bcd);
+ rtl_writephy(tp, 0x14, 0x5065);
+ rtl_writephy(tp, 0x14, 0xd065);
+ rtl_writephy(tp, 0x1f, 0x0bc8);
+ rtl_writephy(tp, 0x11, 0x5655);
+ rtl_writephy(tp, 0x1f, 0x0bcd);
+ rtl_writephy(tp, 0x14, 0x1065);
+ rtl_writephy(tp, 0x14, 0x9065);
+ rtl_writephy(tp, 0x14, 0x1065);
- rtl_w1w0_phy_ocp(tp, 0xc422, 0x4000, 0x2000);
+ rtl_writephy(tp, 0x1f, 0x0000);
}
static void rtl8102e_hw_phy_config(struct rtl8169_private *tp)
--
1.8.1
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
