Hi Anil,
On 1/24/2013 2:08 PM, Kumar, Anil wrote:
> Add OF_DEV_AUXDATA for wdt driver in da850 board dt
> file to use wdt clock.
>
> Signed-off-by: Kumar, Anil <anilkuma...@ti.com>
> ---
> :100644 100644 37c27af... 1b295d2... M arch/arm/mach-davinci/da8xx-dt.c
> arch/arm/mach-davinci/da8xx-dt.c | 8 +++++++-
> 1 files changed, 7 insertions(+), 1 deletions(-)
>
> diff --git a/arch/arm/mach-davinci/da8xx-dt.c
> b/arch/arm/mach-davinci/da8xx-dt.c
> index 37c27af..1b295d2 100644
> --- a/arch/arm/mach-davinci/da8xx-dt.c
> +++ b/arch/arm/mach-davinci/da8xx-dt.c
> @@ -37,11 +37,17 @@ static void __init da8xx_init_irq(void)
> of_irq_init(da8xx_irq_match);
> }
>
> +struct of_dev_auxdata da850_evm_auxdata_lookup[] __initdata = {
Auxdata is not evm specific. This can instead be called da850_auxdata_lookup[].
Also, I dont think it is necessary to add auxdata in a separate patch
from dt nodes. So, I fixed these issues and came up with below patch. I
tested basic wdt reboot. reboot command is still broken (with or
without this patch). Can you please look at that?
Thanks,
Sekhar
----8<----
From: "Kumar, Anil" <anilkuma...@ti.com>
Date: Thu, 24 Jan 2013 14:08:14 +0530
Subject: [PATCH 1/1] ARM: davinci: da850: add wdt DT node
Add da850 wdt DT node.
Signed-off-by: Kumar, Anil <anilkuma...@ti.com>
Signed-off-by: Sekhar Nori <nsek...@ti.com>
---
arch/arm/boot/dts/da850-evm.dts | 3 +++
arch/arm/boot/dts/da850.dtsi | 5 +++++
arch/arm/mach-davinci/da8xx-dt.c | 8 +++++++-
3 files changed, 15 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts
index fa04152..cc777dc 100644
--- a/arch/arm/boot/dts/da850-evm.dts
+++ b/arch/arm/boot/dts/da850-evm.dts
@@ -30,6 +30,9 @@
rtc0: rtc@1c23000 {
status = "okay";
};
+ wdt: wdt@1c21000 {
+ status = "okay";
+ };
};
nand_cs3@62000000 {
status = "okay";
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index 8dd15c0..2800090 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -88,6 +88,11 @@
19>;
status = "disabled";
};
+ wdt: wdt@1c21000 {
+ compatible = "ti,davinci-wdt";
+ reg = <0x21000 0xfff>;
+ status = "disabled";
+ };
};
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
diff --git a/arch/arm/mach-davinci/da8xx-dt.c b/arch/arm/mach-davinci/da8xx-dt.c
index 37c27af..90c3c69 100644
--- a/arch/arm/mach-davinci/da8xx-dt.c
+++ b/arch/arm/mach-davinci/da8xx-dt.c
@@ -37,11 +37,17 @@ static void __init da8xx_init_irq(void)
of_irq_init(da8xx_irq_match);
}
+struct of_dev_auxdata da850_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("ti,davinci-wdt", 0x01c21000, "watchdog", NULL),
+ {}
+};
+
#ifdef CONFIG_ARCH_DAVINCI_DA850
static void __init da850_init_machine(void)
{
- of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
+ of_platform_populate(NULL, of_default_bus_match_table,
+ da850_auxdata_lookup, NULL);
da8xx_uart_clk_enable();
}
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
