The bindings assumed that the gpios properties were always there, which
made the NO_TX and NO_RX mode not usable from device tree. Add extra
checks to make sure that the driver can work if either MOSI or MISO is
not used.
Signed-off-by: Maxime Ripard <maxime.rip...@free-electrons.com>
Cc: Mark Brown <broo...@opensource.wolfsonmicro.com>
---
drivers/spi/spi-gpio.c | 23 ++++++++++++++++++++---
1 file changed, 20 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index c7cf0b7..9ddef55 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -365,9 +365,26 @@ static int spi_gpio_probe_dt(struct platform_device *pdev)
if (!pdata)
return -ENOMEM;
- pdata->sck = of_get_named_gpio(np, "gpio-sck", 0);
- pdata->miso = of_get_named_gpio(np, "gpio-miso", 0);
- pdata->mosi = of_get_named_gpio(np, "gpio-mosi", 0);
+ ret = of_get_named_gpio(np, "gpio-sck", 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "gpio-sck property not found\n");
+ goto error_free;
+ }
+ pdata->sck = ret;
+
+ ret = of_get_named_gpio(np, "gpio-miso", 0);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "gpio-miso property not found, switching
to no-rx mode\n");
+ pdata->miso = SPI_GPIO_NO_MISO;
+ } else
+ pdata->miso = ret;
+
+ ret = of_get_named_gpio(np, "gpio-mosi", 0);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "gpio-mosi property not found, switching
to no-tx mode\n");
+ pdata->mosi = SPI_GPIO_NO_MOSI;
+ } else
+ pdata->mosi = ret;
ret = of_property_read_u32(np, "num-chipselects", &tmp);
if (ret < 0) {
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
