Fixing multi line comment style at two locations. Signed-off-by: Soren Brinkmann <soren.brinkm...@xilinx.com> Reviewed-by: Josh Cartwright <josh.cartwri...@ni.com> --- arch/arm/mach-zynq/timer.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/arm/mach-zynq/timer.c b/arch/arm/mach-zynq/timer.c index 2b23d0f..7b2e047 100644 --- a/arch/arm/mach-zynq/timer.c +++ b/arch/arm/mach-zynq/timer.c @@ -36,7 +36,8 @@ #define XTTCPS_CNT_CNTRL_DISABLE_MASK 0x1 -/* Setup the timers to use pre-scaling, using a fixed value for now that will +/* + * Setup the timers to use pre-scaling, using a fixed value for now that will * work across most input frequency, but it may need to be more dynamic */ #define PRESCALE_EXPONENT 11 /* 2 ^ PRESCALE_EXPONENT = PRESCALE */ @@ -89,8 +90,10 @@ static void xttcps_set_interval(struct xttcps_timer *timer, __raw_writel(cycles, timer->base_addr + XTTCPS_INTR_VAL_OFFSET); - /* Reset the counter (0x10) so that it starts from 0, one-shot - mode makes this needed for timing to be right. */ + /* + * Reset the counter (0x10) so that it starts from 0, one-shot + * mode makes this needed for timing to be right. + */ ctrl_reg |= CNT_CNTRL_RESET; ctrl_reg &= ~XTTCPS_CNT_CNTRL_DISABLE_MASK; __raw_writel(ctrl_reg, timer->base_addr + XTTCPS_CNT_CNTRL_OFFSET); -- 1.8.0.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/