Reported-by: Chris Webb <chris.w...@elastichosts.com>
Reported-by: Richard Davies <richard.dav...@elastichosts.com>

Signed-off-by: Dmitry Fleytman <dmi...@daynix.com>
---
 drivers/net/ethernet/intel/e1000/e1000_ethtool.c |    9 +++++----
 drivers/net/ethernet/intel/e1000/e1000_main.c    |   18 ++++++++++++++++--
 2 files changed, 21 insertions(+), 6 deletions(-)

diff --git a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c 
b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
index 9089d00..ebcce7a 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_ethtool.c
@@ -1091,10 +1091,6 @@ static int e1000_setup_desc_rings(struct e1000_adapter 
*adapter)
        ew32(RDLEN, rxdr->size);
        ew32(RDH, 0);
        ew32(RDT, 0);
-       rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
-               E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
-               (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
-       ew32(RCTL, rctl);
 
        for (i = 0; i < rxdr->count; i++) {
                struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rxdr, i);
@@ -1115,6 +1111,11 @@ static int e1000_setup_desc_rings(struct e1000_adapter 
*adapter)
                memset(skb->data, 0x00, skb->len);
        }
 
+       rctl = E1000_RCTL_EN | E1000_RCTL_BAM | E1000_RCTL_SZ_2048 |
+               E1000_RCTL_LBM_NO | E1000_RCTL_RDMTS_HALF |
+               (hw->mc_filter_type << E1000_RCTL_MO_SHIFT);
+       ew32(RCTL, rctl);
+
        return 0;
 
 err_nomem:
diff --git a/drivers/net/ethernet/intel/e1000/e1000_main.c 
b/drivers/net/ethernet/intel/e1000/e1000_main.c
index 222bfaf..01a4ad9 100644
--- a/drivers/net/ethernet/intel/e1000/e1000_main.c
+++ b/drivers/net/ethernet/intel/e1000/e1000_main.c
@@ -118,6 +118,7 @@ static int e1000_open(struct net_device *netdev);
 static int e1000_close(struct net_device *netdev);
 static void e1000_configure_tx(struct e1000_adapter *adapter);
 static void e1000_configure_rx(struct e1000_adapter *adapter);
+static void e1000_enable_rx(struct e1000_adapter *adapter);
 static void e1000_setup_rctl(struct e1000_adapter *adapter);
 static void e1000_clean_all_tx_rings(struct e1000_adapter *adapter);
 static void e1000_clean_all_rx_rings(struct e1000_adapter *adapter);
@@ -404,6 +405,7 @@ static void e1000_configure(struct e1000_adapter *adapter)
                adapter->alloc_rx_buf(adapter, ring,
                                      E1000_DESC_UNUSED(ring));
        }
+       e1000_enable_rx(adapter);
 }
 
 int e1000_up(struct e1000_adapter *adapter)
@@ -1928,8 +1930,19 @@ static void e1000_configure_rx(struct e1000_adapter 
*adapter)
                        rxcsum &= ~E1000_RXCSUM_TUOFL;
                ew32(RXCSUM, rxcsum);
        }
+}
+
+/**
+ * e1000_enable_rx - Enable receive in HW
+ * @adapter: board private structure
+ *
+ * Inform HW that SW is ready for incoming packets indications
+ **/
 
-       /* Enable Receives */
+static void e1000_enable_rx(struct e1000_adapter *adapter)
+{
+       struct e1000_hw *hw = &adapter->hw;
+       u32 rctl = er32(RCTL);
        ew32(RCTL, rctl | E1000_RCTL_EN);
 }
 
@@ -2196,6 +2209,7 @@ static void e1000_leave_82542_rst(struct e1000_adapter 
*adapter)
                struct e1000_rx_ring *ring = &adapter->rx_ring[0];
                e1000_configure_rx(adapter);
                adapter->alloc_rx_buf(adapter, ring, E1000_DESC_UNUSED(ring));
+               e1000_enable_rx(adapter);
        }
 }
 
@@ -5010,7 +5024,7 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool 
*enable_wake)
                        rctl |= E1000_RCTL_MPE;
 
                /* enable receives in the hardware */
-               ew32(RCTL, rctl | E1000_RCTL_EN);
+               e1000_enable_rx(adapter);
 
                if (hw->mac_type >= e1000_82540) {
                        ctrl = er32(CTRL);
-- 
1.7.9.5

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to