This patch adds basic support for the SolidRun CuBox to DT based
mach-dove. There are still some issues related to ongoing orion/mvebu
development, e.g. gpio-led will not work as there is no DT pinctrl
for dove yet and we don't have board specific setup code. Nevertheless,
the DT description is already introduced here.
Signed-off-by: Sebastian Hesselbarth <sebastian.hesselba...@gmail.com>
---
Cc: Russell King <li...@arm.linux.org.uk>
Cc: Jason Cooper <ja...@lakedaemon.net>
Cc: Andrew Lunn <and...@lunn.ch>
Cc: linux-arm-ker...@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
Cc: Rabeeh Khoury <rab...@solid-run.com>
Cc: Ian Molton <ian.mol...@codethink.co.uk>
Cc: Arnd Bergmann <a...@arndb.de>
Cc: Maen Suleiman <m...@marvell.com>
Cc: Olof Johansson <o...@lixom.net>
---
arch/arm/boot/dts/dove-cubox.dts | 42 ++++++++++++++++++++++++++++++++++++++
arch/arm/mach-dove/Makefile.boot | 1 +
2 files changed, 43 insertions(+)
create mode 100644 arch/arm/boot/dts/dove-cubox.dts
diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts
new file mode 100644
index 0000000..0adbd5a
--- /dev/null
+++ b/arch/arm/boot/dts/dove-cubox.dts
@@ -0,0 +1,42 @@
+/dts-v1/;
+
+/include/ "dove.dtsi"
+
+/ {
+ model = "SolidRun CuBox";
+ compatible = "solidrun,cubox", "marvell,dove";
+
+ memory {
+ device_type = "memory";
+ reg = <0x00000000 0x40000000>;
+ };
+
+ chosen {
+ bootargs = "console=ttyS0,115200n8 earlyprintk";
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ power {
+ label = "Power";
+ gpios = <&gpio0 18 1>;
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&uart0 { status = "okay"; };
+&sdio0 { status = "okay"; };
+&sata0 { status = "okay"; };
+&i2c0 { status = "okay"; };
+
+&spi0 {
+ status = "okay";
+
+ /* spi0.0: 4M Flash Winbond W25Q32BV */
+ spi-flash@0 {
+ compatible = "st,w25q32";
+ spi-max-frequency = <20000000>;
+ reg = <0>;
+ };
+};
diff --git a/arch/arm/mach-dove/Makefile.boot b/arch/arm/mach-dove/Makefile.boot
index 94ab6b3..cfac9c5 100644
--- a/arch/arm/mach-dove/Makefile.boot
+++ b/arch/arm/mach-dove/Makefile.boot
@@ -4,3 +4,4 @@ initrd_phys-y := 0x00800000
dtb-$(CONFIG_MACH_DOVE_DT) += dove-dove-db.dtb
dtb-$(CONFIG_MACH_DOVE_DT) += dove-cm-a510.dtb
+dtb-$(CONFIG_MACH_DOVE_DT) += dove-cubox.dtb
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
