Matt, On Wed, Aug 8, 2012 at 1:55 PM, Matt Sealey <m...@genesi-usa.com> wrote:
... > or any setup at all for this. What's stopping this right now is you > need a new U-Boot which we > didn't release or mainline because we are still testing it (old U-Boot > shipped on the boards > cannot boot device tree anyway). While the number of users of this is Actually you can boot a device tree kernel even on old bootloaders that do not support dt. You need to select: CONFIG_ARM_APPENDED_DTB=y CONFIG_ARM_ATAG_DTB_COMPAT=y Then, make -j4 zImage make imx51-babbage.dtb cat arch/arm/boot/zImage arch/arm/boot/ imx51-babbage.dtb > arch/arm/boot/zImage_dtb mkimage -A arm -O linux -T kernel -C none -a 0x90008000 -e 0x90008000 -n Linux -d arch/arm/boot/zImage_dtb arch/arm/boot/uImage and boot this generated uImage the same way as you used to do in the non-dt case. Regards, Fabio Estevam -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
