Correct spelling typo in drivers/spi
Signed-off-by: Masanari Iida <standby2...@gmail.com>
---
drivers/spi/spi-au1550.c | 2 +-
drivers/spi/spi-bfin-sport.c | 2 +-
drivers/spi/spi-oc-tiny.c | 2 +-
drivers/spi/spi-ppc4xx.c | 4 ++--
drivers/spi/spi-topcliff-pch.c | 2 +-
5 files changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/spi/spi-au1550.c b/drivers/spi/spi-au1550.c
index 5784c87..4de66d1 100644
--- a/drivers/spi/spi-au1550.c
+++ b/drivers/spi/spi-au1550.c
@@ -475,7 +475,7 @@ static irqreturn_t au1550_spi_dma_irq_callback(struct
au1550_spi *hw)
/*
* due to an spi error we consider transfer as done,
* so mask all events until before next transfer start
- * and stop the possibly running dma immediatelly
+ * and stop the possibly running dma immediately
*/
au1550_spi_mask_ack_all(hw);
au1xxx_dbdma_stop(hw->dma_rx_ch);
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index 1fe5119..6555ecd 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -467,7 +467,7 @@ bfin_sport_spi_pump_transfers(unsigned long data)
dev_dbg(drv_data->dev, "IO write error!\n");
drv_data->state = ERROR_STATE;
} else {
- /* Update total byte transfered */
+ /* Update total byte transferred */
message->actual_length += transfer->len;
/* Move to next transfer of this msg */
drv_data->state = bfin_sport_spi_next_transfer(drv_data);
diff --git a/drivers/spi/spi-oc-tiny.c b/drivers/spi/spi-oc-tiny.c
index 698018f..9d9071b 100644
--- a/drivers/spi/spi-oc-tiny.c
+++ b/drivers/spi/spi-oc-tiny.c
@@ -129,7 +129,7 @@ static int tiny_spi_txrx_bufs(struct spi_device *spi,
struct spi_transfer *t)
unsigned int i;
if (hw->irq >= 0) {
- /* use intrrupt driven data transfer */
+ /* use interrupt driven data transfer */
hw->len = t->len;
hw->txp = t->tx_buf;
hw->rxp = t->rx_buf;
diff --git a/drivers/spi/spi-ppc4xx.c b/drivers/spi/spi-ppc4xx.c
index 75ac9d4..7a85f22 100644
--- a/drivers/spi/spi-ppc4xx.c
+++ b/drivers/spi/spi-ppc4xx.c
@@ -101,7 +101,7 @@ struct spi_ppc4xx_regs {
u8 dummy;
/*
* Clock divisor modulus register
- * This uses the follwing formula:
+ * This uses the following formula:
* SCPClkOut = OPBCLK/(4(CDM + 1))
* or
* CDM = (OPBCLK/4*SCPClkOut) - 1
@@ -201,7 +201,7 @@ static int spi_ppc4xx_setupxfer(struct spi_device *spi,
struct spi_transfer *t)
return -EINVAL;
}
- /* Write new configration */
+ /* Write new configuration */
out_8(&hw->regs->mode, cs->mode);
/* Set the clock */
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index cd56dcf..1284c9b 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -505,7 +505,7 @@ static int pch_spi_transfer(struct spi_device *pspi, struct
spi_message *pmsg)
}
if (unlikely(pspi->max_speed_hz == 0)) {
- dev_err(&pspi->dev, "%s pch_spi_tranfer maxspeed=%d\n",
+ dev_err(&pspi->dev, "%s pch_spi_transfer maxspeed=%d\n",
__func__, pspi->max_speed_hz);
retval = -EINVAL;
goto err_out;
--
1.7.12.rc0.22.gcdd159b
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
