Fix misspellings in comments, found with scripts/checkpatch.pl using the misspelling list in scripts/spelling.txt. Comments only, no code changes.
Assisted-by: Cursor:claude-opus-5 Signed-off-by: Hemanth Selam <[email protected]> --- drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_cxt.c | 2 +- drivers/net/ethernet/qlogic/qed/qed_mcp.h | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic.h | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c | 4 ++-- drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c | 2 +- drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c | 4 ++-- 7 files changed, 9 insertions(+), 9 deletions(-) diff --git a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c index fef4b2b0b1f2..79d6a819bf90 100644 --- a/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c +++ b/drivers/net/ethernet/qlogic/netxen/netxen_nic_ctx.c @@ -17,7 +17,7 @@ netxen_poll_rsp(struct netxen_adapter *adapter) int timeout = 0; do { - /* give atleast 1ms for firmware to respond */ + /* give at least 1ms for firmware to respond */ msleep(1); if (++timeout > NX_OS_CRB_RETRY_COUNT) diff --git a/drivers/net/ethernet/qlogic/qed/qed_cxt.c b/drivers/net/ethernet/qlogic/qed/qed_cxt.c index b70262e70baf..89b947f82cf0 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_cxt.c +++ b/drivers/net/ethernet/qlogic/qed/qed_cxt.c @@ -561,7 +561,7 @@ int qed_cxt_cfg_ilt_compute(struct qed_hwfn *p_hwfn, u32 *line_count) * block in the ILT client. This is later used to * configure the CDU segment offset registers and * results in an FL command for TIDs of this - * segement behaves as regular load commands + * segment behaves as regular load commands * (loading TIDs from the working memory). */ line = p_cli->pf_blks[CDUT_SEG_BLK(i)].start_line; diff --git a/drivers/net/ethernet/qlogic/qed/qed_mcp.h b/drivers/net/ethernet/qlogic/qed/qed_mcp.h index 9bd0565fe8ab..50699d600b8e 100644 --- a/drivers/net/ethernet/qlogic/qed/qed_mcp.h +++ b/drivers/net/ethernet/qlogic/qed/qed_mcp.h @@ -783,7 +783,7 @@ struct qed_mcp_info { u16 mfw_mb_length; u32 mcp_hist; - /* Capabilties negotiated with the MFW */ + /* Capabilities negotiated with the MFW */ u32 capabilities; /* S/N for debug data mailbox commands */ diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h index d7c8fadb49de..9728d583b891 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic.h @@ -909,7 +909,7 @@ struct qlcnic_mac_vlan_list { #define QLCNIC_LRO_REQUEST_CLEANUP 4 -/* Capabilites received */ +/* Capabilities received */ #define QLCNIC_FW_CAPABILITY_TSO BIT_1 #define QLCNIC_FW_CAPABILITY_BDG BIT_8 #define QLCNIC_FW_CAPABILITY_FVLANTX BIT_9 diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c index 47cd9ec665ee..ff337a917243 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_83xx_init.c @@ -1957,9 +1957,9 @@ static void qlcnic_83xx_template_end(struct qlcnic_adapter *p_dev) * qlcnic_83xx_exec_template_cmd * * @p_dev: adapter structure -* @p_buff: Poiter to instruction template +* @p_buff: Pointer to instruction template * -* Template provides instructions to stop, restart and initalize firmware. +* Template provides instructions to stop, restart and initialize firmware. * These instructions are abstracted as a series of read, write and * poll operations on hardware registers. Register information and operation * specifics are not exposed to the driver. Driver reads the template from diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c index eb827b86ecae..1b94c42d669b 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_ctx.c @@ -95,7 +95,7 @@ qlcnic_poll_rsp(struct qlcnic_adapter *adapter) int timeout = 0, err = 0; do { - /* give atleast 1ms for firmware to respond */ + /* give at least 1ms for firmware to respond */ mdelay(1); if (++timeout > QLCNIC_OS_CRB_RETRY_COUNT) diff --git a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c index ff4f7cd20c79..23ae76ca81db 100644 --- a/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c +++ b/drivers/net/ethernet/qlogic/qlcnic/qlcnic_main.c @@ -640,7 +640,7 @@ static int qlcnic_max_rings(struct qlcnic_adapter *adapter, u8 ring_cnt, void qlcnic_set_tx_ring_count(struct qlcnic_adapter *adapter, u8 tx_cnt) { - /* 83xx adapter does not have max_tx_rings intialized in probe */ + /* 83xx adapter does not have max_tx_rings initialized in probe */ if (adapter->max_tx_rings) adapter->drv_tx_rings = qlcnic_max_rings(adapter, tx_cnt, QLCNIC_TX_QUEUE); @@ -650,7 +650,7 @@ void qlcnic_set_tx_ring_count(struct qlcnic_adapter *adapter, u8 tx_cnt) void qlcnic_set_sds_ring_count(struct qlcnic_adapter *adapter, u8 rx_cnt) { - /* 83xx adapter does not have max_sds_rings intialized in probe */ + /* 83xx adapter does not have max_sds_rings initialized in probe */ if (adapter->max_sds_rings) adapter->drv_sds_rings = qlcnic_max_rings(adapter, rx_cnt, QLCNIC_RX_QUEUE); -- 2.48.1
