Fix misspellings in comments, found with scripts/checkpatch.pl using the misspelling list in scripts/spelling.txt. Comments only, no code changes.
Assisted-by: Cursor:claude-opus-5 Signed-off-by: Hemanth Selam <[email protected]> --- drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 +- drivers/net/ethernet/broadcom/bcm63xx_enet.h | 2 +- drivers/net/ethernet/broadcom/bcmsysport.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x.h | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c | 4 ++-- drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c | 8 ++++---- drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c | 2 +- drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h | 4 ++-- 10 files changed, 16 insertions(+), 16 deletions(-) diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.c b/drivers/net/ethernet/broadcom/bcm63xx_enet.c index 7ef1babfeca6..f6595fdc888d 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c @@ -1564,7 +1564,7 @@ static int bcm_enet_set_pauseparam(struct net_device *dev, if (priv->has_phy) { if (ecmd->autoneg && (ecmd->rx_pause != ecmd->tx_pause)) { - /* asymetric pause mode not supported, + /* asymmetric pause mode not supported, * actually possible but integrated PHY has RO * asym_pause bit */ return -EINVAL; diff --git a/drivers/net/ethernet/broadcom/bcm63xx_enet.h b/drivers/net/ethernet/broadcom/bcm63xx_enet.h index 78f1830fb3cb..ba8f42cf5fb2 100644 --- a/drivers/net/ethernet/broadcom/bcm63xx_enet.h +++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.h @@ -265,7 +265,7 @@ struct bcm_enet_priv { /* number of available descriptor for tx */ int tx_desc_count; - /* next tx descriptor avaiable */ + /* next tx descriptor available */ int tx_curr_desc; /* next dirty tx descriptor to reclaim */ diff --git a/drivers/net/ethernet/broadcom/bcmsysport.h b/drivers/net/ethernet/broadcom/bcmsysport.h index a34296f989f1..6f807e96dbd8 100644 --- a/drivers/net/ethernet/broadcom/bcmsysport.h +++ b/drivers/net/ethernet/broadcom/bcmsysport.h @@ -402,7 +402,7 @@ struct bcm_rsb { #define TDMA_DESC_RING_BASE(i) (TDMA_DESC_RING_00_BASE + \ ((i) * TDMA_DESC_RING_SIZE)) -/* Ring indexed register addreses */ +/* Ring indexed register addresses */ #define TDMA_DESC_RING_HEAD_TAIL_PTR(i) (TDMA_DESC_RING_BASE(i) + \ RING_HEAD_TAIL_PTR) #define TDMA_DESC_RING_COUNT(i) (TDMA_DESC_RING_BASE(i) + \ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h index 9580ab83d387..28ea4a33f245 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x.h @@ -280,7 +280,7 @@ enum { * (db_msg_sz 1 << 7 * cid + 0x40 DPM offset) it can come up with a valid number * We must avoid coming up with cid 8 for iscsi since according to this method * the designated UIO cid will come out 0 and it has a special handling for that - * case which doesn't suit us. Therefore will will cieling to closes cid which + * case which doesn't suit us. Therefore will cieling to closes cid which * has least signigifcant nibble 8 and if it is 8 we will move forward to 0x18. */ @@ -666,7 +666,7 @@ struct bnx2x_fastpath { MAX_TX_DESC_CNT * NEXT_PAGE_TX_DESC_CNT) /* max BDs per tx packet w/o next_pages: * START_BD - describes packed - * START_BD(splitted) - includes unpaged data segment for GSO + * START_BD(split) - includes unpaged data segment for GSO * PARSING_BD - for TSO and CSUM data * PARSING_BD2 - for encapsulation data * Frag BDs - describes pages for frags diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c index 9af81630c8a4..3df8a5988521 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_dcb.c @@ -1986,7 +1986,7 @@ static void bnx2x_dcbnl_set_pg_tccfg_tx(struct net_device *netdev, int prio, return; /** - * bw_pct ignored - band-width percentage devision between user + * bw_pct ignored - band-width percentage division between user * priorities within the same group is not * standard and hence not supported * @@ -2038,7 +2038,7 @@ static void bnx2x_dcbnl_get_pg_tccfg_tx(struct net_device *netdev, int prio, DP(BNX2X_MSG_DCB, "prio = %d\n", prio); /** - * bw_pct ignored - band-width percentage devision between user + * bw_pct ignored - band-width percentage division between user * priorities within the same group is not * standard and hence not supported * diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h index 611efee75834..5297ab578a6f 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_hsi.h @@ -2342,7 +2342,7 @@ struct shmem2_region { u32 oem_i2c_data_addr; }; - /* 9 entires for the C2S PCP map for each inner VLAN PCP + 1 default */ + /* 9 entries for the C2S PCP map for each inner VLAN PCP + 1 default */ /* For PCP values 0-3 use the map lower */ /* 0xFF000000 - PCP 0, 0x00FF0000 - PCP 1, * 0x0000FF00 - PCP 2, 0x000000FF PCP 3 diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h index fc7fce642666..b5004aab124d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_init_ops.h @@ -582,7 +582,7 @@ static void bnx2x_init_pxp_arb(struct bnx2x *bp, int r_order, REG_WR(bp, PXP2_REG_WR_CDU_MPS, val); } - /* Validate number of tags suppoted by device */ + /* Validate number of tags supported by device */ #define PCIE_REG_PCIER_TL_HDR_FC_ST 0x2980 val = REG_RD(bp, PCIE_REG_PCIER_TL_HDR_FC_ST); val &= 0xFF; diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index ea310057fe3a..84d002b31920 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -2536,7 +2536,7 @@ static int bnx2x_pbf_update(struct link_params *params, u32 flow_ctrl, } /** - * bnx2x_get_emac_base - retrive emac base address + * bnx2x_get_emac_base - retrieve emac base address * * @bp: driver handle * @mdc_mdio_access: access type @@ -3593,7 +3593,7 @@ static u8 bnx2x_ext_phy_resolve_fc(struct bnx2x_phy *phy, u8 ret = 0; vars->flow_ctrl = BNX2X_FLOW_CTRL_NONE; if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) { - /* Update the advertised flow-controled of LD/LP in AN */ + /* Update the advertised flow-controlled of LD/LP in AN */ if (phy->req_line_speed == SPEED_AUTO_NEG) bnx2x_ext_phy_update_adv_fc(phy, params, vars); /* But set the flow-control result as the requested one */ @@ -3743,7 +3743,7 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, {MDIO_WC_DEVAD, MDIO_WC_REG_CL72_USERB0_CL72_TX_FIR_TAP, 0}, }; DP(NETIF_MSG_LINK, "Enable Auto Negotiation for KR\n"); - /* Set to default registers that may be overriden by 10G force */ + /* Set to default registers that may be overridden by 10G force */ for (i = 0; i < ARRAY_SIZE(reg_set); i++) bnx2x_cl45_write(bp, phy, reg_set[i].devad, reg_set[i].reg, reg_set[i].val); @@ -5425,7 +5425,7 @@ static void bnx2x_flow_ctrl_resolve(struct bnx2x_phy *phy, /* Resolve from gp_status in case of AN complete and not sgmii */ if (phy->req_flow_ctrl != BNX2X_FLOW_CTRL_AUTO) { - /* Update the advertised flow-controled of LD/LP in AN */ + /* Update the advertised flow-controlled of LD/LP in AN */ if (phy->req_line_speed == SPEED_AUTO_NEG) bnx2x_update_adv_fc(phy, params, vars, gp_status); /* But set the flow-control result as the requested one */ diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c index 39eb6ab5f805..277c7bd9c6e7 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c @@ -12669,7 +12669,7 @@ static int bnx2x_set_mc_list(struct bnx2x *bp) if (rc) return rc; - /* Override the curently configured set of mc filters */ + /* Override the currently configured set of mc filters */ rc = bnx2x_config_mcast(bp, &rparam, BNX2X_MCAST_CMD_SET); if (rc < 0) diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h index a018f251d198..30943f347164 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_reg.h @@ -2236,7 +2236,7 @@ extern const u32 dmae_reg_go_c[]; /* [RW 1] Output enable for TX PAUSE signal to the MAC. */ #define NIG_REG_P0_MAC_PAUSE_OUT_EN 0x185b4 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for - * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * future expansion) each priority is to be mapped to. Bits 3:0 specify the * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit * priority field is extracted from the outer-most VLAN in receive packet. * Only COS 0 and COS 1 are supported in E2. */ @@ -2434,7 +2434,7 @@ extern const u32 dmae_reg_go_c[]; /* [RW 1] Output enable for TX PAUSE signal to the MAC. */ #define NIG_REG_P1_MAC_PAUSE_OUT_EN 0x185c8 /* [RW 32] Eight 4-bit configurations for specifying which COS (0-15 for - * future expansion) each priorty is to be mapped to. Bits 3:0 specify the + * future expansion) each priority is to be mapped to. Bits 3:0 specify the * COS for priority 0. Bits 31:28 specify the COS for priority 7. The 3-bit * priority field is extracted from the outer-most VLAN in receive packet. * Only COS 0 and COS 1 are supported in E2. */ -- 2.48.1
