From: Frank Li <[email protected]>

The Vybrid M4 NOMMU platform support was added as a proof-of-concept and
has not seen practical use in production systems.

Commercial users and hardware vendors migrated to Zephyr or other RTOS
solutions years ago, leaving the NOMMU platform support effectively
unused and unmaintained.

Remove the obsolete support to reduce maintenance burden and simplify the
code.

Signed-off-by: Frank Li <[email protected]>
---
Cc: Stefan Agner <[email protected]>
---
 arch/arm/boot/dts/nxp/vf/Makefile            |  2 -
 arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts | 61 -------------------
 arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts  | 88 ----------------------------
 arch/arm/boot/dts/nxp/vf/vf610m4.dtsi        | 61 -------------------
 4 files changed, 212 deletions(-)

diff --git a/arch/arm/boot/dts/nxp/vf/Makefile 
b/arch/arm/boot/dts/nxp/vf/Makefile
index 0a4a7f9dd43e4..1733506c0c725 100644
--- a/arch/arm/boot/dts/nxp/vf/Makefile
+++ b/arch/arm/boot/dts/nxp/vf/Makefile
@@ -3,9 +3,7 @@ dtb-$(CONFIG_SOC_VF610) += \
        vf500-colibri-eval-v3.dtb \
        vf610-bk4.dtb \
        vf610-colibri-eval-v3.dtb \
-       vf610m4-colibri.dtb \
        vf610-cosmic.dtb \
-       vf610m4-cosmic.dtb \
        vf610-twr.dtb \
        vf610-zii-cfu1.dtb \
        vf610-zii-dev-rev-b.dtb \
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts 
b/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
deleted file mode 100644
index 86d32f54c250f..0000000000000
--- a/arch/arm/boot/dts/nxp/vf/vf610m4-colibri.dts
+++ /dev/null
@@ -1,61 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+ OR MIT
-/*
- * Device tree for Colibri VF61 Cortex-M4 support
- *
- * Copyright (C) 2015 Stefan Agner
- */
-
-/dts-v1/;
-#include "vf610m4.dtsi"
-
-/ {
-       model = "VF610 Cortex-M4";
-       compatible = "fsl,vf610m4";
-
-       chosen {
-               bootargs = "clk_ignore_unused init=/linuxrc rw";
-               stdout-path = "serial2:115200";
-       };
-
-       memory@8c000000 {
-               device_type = "memory";
-               reg = <0x8c000000 0x3000000>;
-       };
-};
-
-&gpio0 {
-       status = "disabled";
-};
-
-&gpio1 {
-       status = "disabled";
-};
-
-&gpio2 {
-       status = "disabled";
-};
-
-&gpio3 {
-       status = "disabled";
-};
-
-&gpio4 {
-       status = "disabled";
-};
-
-&uart2 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart2>;
-       status = "okay";
-};
-
-&iomuxc {
-       pinctrl_uart2: uart2grp {
-               fsl,pins = <
-                       VF610_PAD_PTD0__UART2_TX                0x21a2
-                       VF610_PAD_PTD1__UART2_RX                0x21a1
-                       VF610_PAD_PTD2__UART2_RTS               0x21a2
-                       VF610_PAD_PTD3__UART2_CTS               0x21a1
-               >;
-       };
-};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts 
b/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
deleted file mode 100644
index 454b484368cb7..0000000000000
--- a/arch/arm/boot/dts/nxp/vf/vf610m4-cosmic.dts
+++ /dev/null
@@ -1,88 +0,0 @@
-/*
- * Device tree for Cosmic+ VF6xx Cortex-M4 support
- *
- * Copyright (C) 2015
- *
- * Based on vf610m4 Colibri
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/dts-v1/;
-#include "vf610m4.dtsi"
-
-/ {
-       model = "VF610 Cortex-M4";
-       compatible = "fsl,vf610m4";
-};
-
-&gpio0 {
-       status = "disabled";
-};
-
-&gpio1 {
-       status = "disabled";
-};
-
-&gpio2 {
-       status = "disabled";
-};
-
-&gpio3 {
-       status = "disabled";
-};
-
-&gpio4 {
-       status = "disabled";
-};
-
-&uart3 {
-       pinctrl-names = "default";
-       pinctrl-0 = <&pinctrl_uart3>;
-       status = "okay";
-};
-
-&iomuxc {
-       pinctrl_uart3: uart3grp {
-               fsl,pins = <
-                       VF610_PAD_PTA20__UART3_TX               0x21a2
-                       VF610_PAD_PTA21__UART3_RX               0x21a1
-               >;
-       };
-};
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi 
b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
deleted file mode 100644
index 648d219e1d0ed..0000000000000
--- a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
+++ /dev/null
@@ -1,61 +0,0 @@
-/*
- * Device tree for VF6xx Cortex-M4 support
- *
- * Copyright (C) 2015 Stefan Agner
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "../../armv7-m.dtsi"
-#include "vfxxx.dtsi"
-
-/ {
-       #address-cells = <1>;
-       #size-cells = <1>;
-       chosen { };
-       aliases { };
-};
-
-&mscm_ir {
-       interrupt-parent = <&nvic>;
-};
-
-&nvic {
-       arm,num-irq-priority-bits = <4>;
-};

-- 
2.43.0


Reply via email to