On 12/13/25 1:00 PM, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <[email protected]>
>
> All Snapdragon 845 platform has same controls GPIOs.
>
> Signed-off-by: David Heidelberg <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso | 2 +-
> arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 8 --------
> 2 files changed, 1 insertion(+), 9 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
> b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
> index dbe1911d8e470..f6c2c98970d76 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
> @@ -40,7 +40,7 @@ camera@10 {
> /* CAM0_RST_N */
> reset-gpios = <&tlmm 9 GPIO_ACTIVE_LOW>;
> pinctrl-names = "default";
> - pinctrl-0 = <&cam0_default>;
> + pinctrl-0 = <&cam0_default &cam_mclk0_default>;
>
> clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
> clock-names = "xvclk";
> diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> index ce23f87e0316b..981d19c20fa1f 100644
> --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
> @@ -877,14 +877,6 @@ rst-pins {
> drive-strength = <16>;
> bias-disable;
> };
> -
> - mclk0-pins {
> - pins = "gpio13";
> - function = "cam_mclk";
> -
> - drive-strength = <16>;
> - bias-disable;
> - };
Please also remove the mclk3 below
Konrad
> };
>
> cam3_default: cam3-default-state {
>
