On 12/13/25 14:00, David Heidelberg via B4 Relay wrote:
From: David Heidelberg <[email protected]>
There are shared for the whole architecture, so let's define these in
proper place.
Signed-off-by: David Heidelberg <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845.dtsi | 43 ++++++++++++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi
b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index bf2f9c04adba7..97bd9513b011b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2805,6 +2805,49 @@ tlmm: pinctrl@3400000 {
gpio-ranges = <&tlmm 0 0 151>;
wakeup-parent = <&pdc_intc>;
+ cam_mclk0_default: cam-mclk0-default-state {
+ pins = "gpio13";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk0_sleep: cam-mclk0-sleep-state {
+ pins = "gpio13";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk1_default: cam-mclk1-default-state {
+ pins = "gpio14";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk1_sleep: cam-mclk1-sleep-state {
+ pins = "gpio14";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+ cam_mclk2_default: cam-mclk2-default-state {
+ pins = "gpio15";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ cam_mclk2_sleep: cam-mclk2-sleep-state {
+ pins = "gpio15";
+ function = "cam_mclk";
+ drive-strength = <2>;
+ bias-pull-down;
+ };
+
+
Please remove an excessive blank line.
cci0_default: cci0-default-state {
/* SDA, SCL */
pins = "gpio17", "gpio18";
Please add mclk3 to the list, it's one of the gpio16 pad functions.
After adding that
Reviewed-by: Vladimir Zapolskiy <[email protected]>
--
Best wishes,
Vladimir
