This patch series adds initial support for the google-manta board, known as Google Nexus 10 to users. The device is powered by the Exynos 5250 SoC. The bindings for the notification led are already in the kernel mailing list, got recently applied and can be found here: https://lore.kernel.org/linux-leds/[email protected]/
The first two patches add the necessary device tree files and bindings, while the last patch makes a small modification to allow CPU1 to boot, as it requires a call to it's underlying firmware. This first iteration only provides basic support to get the board up and running and usable via UART and with WiFi support. We will upstream additional features in future patches. All patches have been tested on real hardware. Changes in v3: - Added a better patch description for firmware patch. (@krzk) - Reorganized nodes in DT. (@krzk) - Fixed memory node to use separate entries. (@krzk) - Renamed pwrseq node. (@krzk) - Fixed firmware checking for old dt compatible string. (@pavel) - Link to v2: https://lore.kernel.org/all/[email protected]/ Changes in v2: - Renamed to google-manta (@krzk) - Link to v1: https://lore.kernel.org/all/[email protected]/ Signed-off-by: Lukas Timmermann <[email protected]> --- Alexandre Marquet (3): dt-bindings: ARM: samsung: Add Google Manta (Nexus 10) ARM: dts: exynos: Add Google Manta (Nexus 10) ARM: samsung: exynos5250: Allow CPU1 to boot .../bindings/arm/samsung/samsung-boards.yaml | 1 + arch/arm/boot/dts/samsung/Makefile | 1 + arch/arm/boot/dts/samsung/exynos5250-manta.dts | 511 +++++++++++++++++++++ arch/arm/mach-exynos/firmware.c | 4 +- 4 files changed, 515 insertions(+), 2 deletions(-) --- base-commit: d5f0e9098499869354aacb5b080f602f0399d396 change-id: 20251215-lat3st-staging-d9c926d8a75f Best regards, -- Lukas Timmermann <[email protected]>
