uart9 is debug serial on USB SBU1/2
uart6 is bluetooth
Signed-off-by: Paul Sajna <sajatt...@postmarketos.org>
---
arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 45 ++++++++++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 10 ++++++
2 files changed, 55 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
index
82d6543835324ed92300c4ed24c51f4b79321f99..911f5e614d0a4a85da61570ce400a85efa08623b
100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -27,10 +27,17 @@
/delete-node/ &wlan_msa_mem;
/ {
+ aliases {
+ serial0 = &uart9;
+ serial1 = &uart6;
+ };
+
chosen {
#address-cells = <2>;
#size-cells = <2>;
ranges;
+
+ stdout-path = "serial0:115200n8";
};
reserved-memory {
@@ -595,3 +602,41 @@ &usb_1_qmpphy {
status = "okay";
};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&qup_uart9_rx {
+ drive-strength = <2>;
+ bias-pull-up;
+};
+
+&qup_uart9_tx {
+ drive-strength = <2>;
+ bias-disable;
+};
+
+&uart6 {
+ pinctrl-0 = <&qup_uart6_4pin>;
+
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn3990-bt";
+
+ vddio-supply = <&vreg_s4a_1p8>;
+ vddxo-supply = <&vreg_l7a_1p8>;
+ vddrf-supply = <&vreg_l17a_1p3>;
+ vddch0-supply = <&vreg_l25a_3p3>;
+ max-speed = <3200000>;
+ };
+};
+
+&uart9 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
index
a12723310c8b630a4961de671ea8b60f1f8b512b..49225e4fa80e5f45a36964d5d733dc238e4413f8
100644
--- a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -66,3 +66,13 @@ thinq_key_default: thinq-key-default-state {
bias-pull-up;
};
};
+
+&uart6 {
+ bluetooth {
+ /*
+ * This path is relative to the qca/
+ * subdir under lib/firmware.
+ */
+ firmware-name = "judyln/crnv21.bin";
+ };
+};
--
2.51.0
