[PATCH v3 6/6] arm64: dts: qcom: qcs615-ride: enable remoteprocs

[Lijuan Gao]

Enable all remoteproc nodes on the qcs615-ride board and point to the
appropriate firmware files to allow proper functioning of the remote
processors.

Reviewed-by: Konrad Dybcio <konrad.dyb...@oss.qualcomm.com>
Signed-off-by: Lijuan Gao <quic_liju...@quicinc.com>
---
 arch/arm64/boot/dts/qcom/qcs615-ride.dts | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts 
b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index 
2b5aa3c66867676bda59ff82b902b6e4974126f8..a6652e4817d1c218c7981b04daeb035e2852ac1a
 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -240,6 +240,18 @@ &qupv3_id_0 {
        status = "okay";
 };
 
+&remoteproc_adsp {
+       firmware-name = "qcom/qcs615/adsp.mbn";
+
+       status = "okay";
+};
+
+&remoteproc_cdsp {
+       firmware-name = "qcom/qcs615/cdsp.mbn";
+
+       status = "okay";
+};
+
 &rpmhcc {
        clocks = <&xo_board_clk>;
 };

-- 
2.34.1