On Wed, Jan 22, 2025 at 3:11 AM Joe Damato <jdam...@fastly.com> wrote:
>
> Use persistent NAPI config so that NAPI IDs are not renumbered as queue
> counts change.
>
> $ sudo ethtool -l ens4 | tail -5 | egrep -i '(current|combined)'
> Current hardware settings:
> Combined: 4
>
> $ ./tools/net/ynl/pyynl/cli.py \
> --spec Documentation/netlink/specs/netdev.yaml \
> --dump queue-get --json='{"ifindex": 2}'
> [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
> {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
> {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
> {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
> {'id': 0, 'ifindex': 2, 'type': 'tx'},
> {'id': 1, 'ifindex': 2, 'type': 'tx'},
> {'id': 2, 'ifindex': 2, 'type': 'tx'},
> {'id': 3, 'ifindex': 2, 'type': 'tx'}]
>
> Now adjust the queue count, note that the NAPI IDs are not renumbered:
>
> $ sudo ethtool -L ens4 combined 1
> $ ./tools/net/ynl/pyynl/cli.py \
> --spec Documentation/netlink/specs/netdev.yaml \
> --dump queue-get --json='{"ifindex": 2}'
> [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
> {'id': 0, 'ifindex': 2, 'type': 'tx'}]
>
> $ sudo ethtool -L ens4 combined 8
> $ ./tools/net/ynl/pyynl/cli.py \
> --spec Documentation/netlink/specs/netdev.yaml \
> --dump queue-get --json='{"ifindex": 2}'
> [{'id': 0, 'ifindex': 2, 'napi-id': 8193, 'type': 'rx'},
> {'id': 1, 'ifindex': 2, 'napi-id': 8194, 'type': 'rx'},
> {'id': 2, 'ifindex': 2, 'napi-id': 8195, 'type': 'rx'},
> {'id': 3, 'ifindex': 2, 'napi-id': 8196, 'type': 'rx'},
> {'id': 4, 'ifindex': 2, 'napi-id': 8197, 'type': 'rx'},
> {'id': 5, 'ifindex': 2, 'napi-id': 8198, 'type': 'rx'},
> {'id': 6, 'ifindex': 2, 'napi-id': 8199, 'type': 'rx'},
> {'id': 7, 'ifindex': 2, 'napi-id': 8200, 'type': 'rx'},
> [...]
>
> Signed-off-by: Joe Damato <jdam...@fastly.com>
> Reviewed-by: Xuan Zhuo <xuanz...@linux.alibaba.com>
Acked-by: Jason Wang <jasow...@redhat.com>
Thanks
