From: Manikanta Mylavarapu <quic_mmani...@quicinc.com>

Enable nodes required for q6 remoteproc bring up.

Signed-off-by: Manikanta Mylavarapu <quic_mmani...@quicinc.com>
Signed-off-by: Gokul Sriram Palanisamy <quic_gokul...@quicinc.com>
---
changes since v1: Addressed comments by Krzysztof
        - renamed reserved memory at 0x4a900000 from 'wcnss' to 'wcss'

 arch/arm64/boot/dts/qcom/ipq5332.dtsi | 62 +++++++++++++++++++++++++++
 1 file changed, 62 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi 
b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index 71328b223531..06fe7c94ee37 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -146,6 +146,11 @@ smem@4a800000 {
 
                        hwlocks = <&tcsr_mutex 3>;
                };
+
+               q6_region: wcss@4a900000 {
+                       reg = <0x0 0x4a900000 0x0 0x2b00000>;
+                       no-map;
+               };
        };
 
        soc@0 {
@@ -479,6 +484,39 @@ frame@b128000 {
                                status = "disabled";
                        };
                };
+
+               q6v5_wcss: remoteproc@d100000 {
+                       compatible = "qcom,ipq5332-wcss-sec-pil";
+                       reg = <0xd100000 0x4040>;
+                       firmware-name = "ath12k/IPQ5332/hw1.0/q6_fw0.mdt";
+                       interrupts-extended = <&intc GIC_SPI 421 
IRQ_TYPE_EDGE_RISING>,
+                                             <&wcss_smp2p_in 0 IRQ_TYPE_NONE>,
+                                             <&wcss_smp2p_in 1 IRQ_TYPE_NONE>,
+                                             <&wcss_smp2p_in 2 IRQ_TYPE_NONE>,
+                                             <&wcss_smp2p_in 3 IRQ_TYPE_NONE>;
+                       interrupt-names = "wdog",
+                                         "fatal",
+                                         "ready",
+                                         "handover",
+                                         "stop-ack";
+
+                       clocks = <&gcc GCC_IM_SLEEP_CLK>;
+                       clock-names = "sleep";
+
+                       qcom,smem-states = <&wcss_smp2p_out 1>,
+                                          <&wcss_smp2p_out 0>;
+                       qcom,smem-state-names = "stop",
+                                               "shutdown";
+
+                       memory-region = <&q6_region>;
+
+                       glink-edge {
+                               interrupts = <GIC_SPI 417 IRQ_TYPE_EDGE_RISING>;
+                               label = "rtr";
+                               qcom,remote-pid = <1>;
+                               mboxes = <&apcs_glb 8>;
+                       };
+               };
        };
 
        timer {
@@ -488,4 +526,28 @@ timer {
                             <GIC_PPI 4 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>,
                             <GIC_PPI 1 (GIC_CPU_MASK_SIMPLE(4) | 
IRQ_TYPE_LEVEL_LOW)>;
        };
+
+       wcss: wcss-smp2p {
+               compatible = "qcom,smp2p";
+               qcom,smem = <435>, <428>;
+
+               interrupt-parent = <&intc>;
+               interrupts = <GIC_SPI 418 IRQ_TYPE_EDGE_RISING>;
+
+               mboxes = <&apcs_glb 9>;
+
+               qcom,local-pid = <0>;
+               qcom,remote-pid = <1>;
+
+               wcss_smp2p_out: master-kernel {
+                       qcom,entry-name = "master-kernel";
+                       #qcom,smem-state-cells = <1>;
+               };
+
+               wcss_smp2p_in: slave-kernel {
+                       qcom,entry-name = "slave-kernel";
+                       interrupt-controller;
+                       #interrupt-cells = <2>;
+               };
+       };
 };
-- 
2.34.1


Reply via email to